3D打印模型对机器人辅助根治性前列腺切除术定量手术结局的影响:队列研究
前瞻性纳入82例MRI可见前列腺癌(PI-RADS V2≥3)拟行机器人辅助根治性前列腺切除术的患者,评估患者特异性3D打印前列腺癌模型对手术切缘阳性率、手术时间和出血量等定量指标的影响。3D打印模型组切缘阳性率8.11%低于仅影像组的28.6%(p=0.128),手术时间减少9分钟,平均出血量减少5mL,术者对解剖理解和手术入路信心有所提升,但差异均未达统计学显著。
要点
- 3D打印模型组切缘阳性率8.11%低于仅影像组28.6%,但差异无统计学意义(p=0.128)。
- 3D打印模型组手术时间较仅影像组缩短9分钟,平均出血量减少5mL。
- 术者审阅3D打印模型后解剖理解与手术入路信心评分提高,但差异无统计学意义。
诊断标准与关键数值
- 3D打印模型组切缘阳性率为8.11%,仅影像组为28.6%,p=0.128。
- 3D打印模型组手术时间为213±42分钟,仅影像组为222±47分钟,缩短9分钟。
- 3D打印模型组平均出血量为227±148mL,仅影像组为232±114mL,减少5mL。
- 术者解剖理解评分从3.60±0.74提高至4.20±0.56(p=0.62),手术入路信心评分从3.86±0.53提高至4.20±0.56(p=0.22)。
临床应用与阅片要点
- 对于MRI可见前列腺癌(PI-RADS V2≥3)拟行机器人辅助根治性前列腺切除术的患者,可考虑制作患者特异性3D打印模型辅助术前规划。
- 3D打印模型有助于术者直观理解前列腺癌病灶与周围解剖结构的关系,可能有利于减少切缘阳性、缩短手术时间和减少出血。
- 需注意本研究定量指标差异均未达统计学显著,3D打印模型的临床获益尚需更大样本验证。
局限性
- 样本量有限(n=82),可能影响统计效能。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
BACKGROUND: Three-dimensional (3D) printed anatomic models can facilitate presurgical planning by providing surgeons with detailed knowledge of the exact location of pertinent anatomical structures. Although 3D printed anatomic models have been shown to be useful for pre-operative planning, few studies have demonstrated how these models can influence quantitative surgical metrics.
OBJECTIVE: To prospectively assess whether patient-specific 3D printed prostate cancer models can improve quantitative surgical metrics in patients undergoing robotic-assisted radical prostatectomy (RARP).
METHODS: Patients with MRI-visible prostate cancer (PI-RADS V2 ≥ 3) scheduled to undergo RARP were prospectively enrolled in our IRB approved study (n = 82). Quantitative surgical metrics included the rate of positive surgical margins (PSMs), operative times, and blood loss. A qualitative Likert scale survey to assess understanding of anatomy and confidence regarding surgical approach was also implemented.
RESULTS: The rate of PSMs was lower for the 3D printed model group (8.11%) compared to that with imaging only (28.6%), p = 0.128. The 3D printed model group had a 9-min reduction in operating time (213 ± 42 min vs. 222 ± 47 min) and a 5 mL reduction in average blood loss (227 ± 148 mL vs. 232 ± 114 mL). Surgeon anatomical understanding and confidence improved after reviewing the 3D printed models (3.60 ± 0.74 to 4.20 ± 0.56, p = 0.62 and 3.86 ± 0.53 to 4.20 ± 0.56, p = 0.22).
CONCLUSIONS: 3D printed prostate cancer models can positively impact quantitative patient outcomes such as PSMs, operative times, and blood loss in patients undergoing RARP.
引用
- Wake, Rosenkrantz, Huang, et al. Impact of 3D printed models on quantitative surgical outcomes for patients undergoing robotic-assisted radical prostatectomy: a cohort study. Abdom Radiol (NY). 2023. PMID: 36749368. doi:10.1007/s00261-023-03815-2
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。