利用线形状建模换能器元件的乳腺超声断层成像全波形反演
本研究将换能器元件的空间形状(二维截面为线段)纳入全波形反演框架,避免阶梯伪影,并通过傅里叶配点法将元件表示为空间分布与带限δ函数的离散卷积。数字与物理实验验证表明,该方法可降低重建图像的均方根误差、提高结构相似性,并改善收敛稳定性与速度。
要点
- 换能器元件尺寸接近或大于声波波长时,建模其形状对全波形反演有意义。
- 该方法可减少重建图像均方根误差并提高结构相似性。
- 该方法有助于改善收敛稳定性并加速收敛。
局限性
- 本文聚焦二维成像,未考虑平面间效应。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
OBJECTIVE: The objective of the work described here was to incorporate the spatial shapes of the transducer elements into the framework of the full-waveform inversion.
METHODS: An element is treated as its cross-section in the 2-D imaging plane, that is, a line segment. The elements are not simply modeled as a set of point sources on their surface to avoid staircasing artifacts. By use of the Fourier collocation method, an element is spatially represented as the discrete convolution between its spatial distribution and a band-limited delta function. The excitation pulses on the emitters and recorded signals on the receivers are then weighted based on the discrete convolution results. Digital and physical experiments are implemented to validate the method.
DISCUSSION: It is meaningful to model the shapes of the elements if their spatial sizes are similar to or larger than the acoustic wavelengths. It should, however, be noted that because this article focuses on 2-D imaging, the inter-plane effects are not considered.
CONCLUSION: The approach helps reduce the root mean square errors and increase the structural similarity of the reconstructed images. It also helps to improve the stability of convergence and to accelerate the convergence speed.
引用
- Yuan, Zhao, Zhang, et al. Full-Waveform Inversion for Breast Ultrasound Tomography Using Line-Shape Modeled Elements. Ultrasound Med Biol. 2023. PMID: 36737306. doi:10.1016/j.ultrasmedbio.2022.12.004
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。