指南与共识心血管CT

CAD-RADS 2.0:2022 冠状动脉疾病报告与数据系统专家共识

CAD-RADS 2.0 - 2022 Coronary Artery Disease - Reporting and Data System.: An expert consensus document of the Society of Cardiovascular Computed Tomography (SCCT), the American College of Cardiology (ACC), the American College of Radiology (ACR) and the North America Society of Cardiovascular Imagin
RSS 订阅 · 指南共识 · 心血管影像 · 2022-11-27

SCCT、ACC、ACR 与 NASCI 联合发布 CAD-RADS 2.0 专家共识,用于标准化冠状动脉 CT 血管成像(CCTA)报告。新版沿用狭窄程度、斑块负荷与修饰符框架,新增 CT-FFR 或心肌 CT 灌注评估病变特异性缺血,并引入 P1–P4 斑块负荷分级;狭窄分级仍以患者水平最严重冠状动脉管腔狭窄为准,从 CAD-RADS 0 至 CAD-RADS 5。

要点

  • 报告应按患者水平最严重狭窄定 CAD-RADS 0–5 级。
  • 斑块负荷用 P1–P4 描述,可多方法估算并报告。
  • 若行 CT-FFR 或 CTP,可评估病变特异性缺血并写入修饰符。

核心结论

  • CAD-RADS 2.0 旨在通过纳入心脏 CT 新技术进展、近期临床试验数据与新临床指南,改进 CCTA 初始报告系统。
  • CAD-RADS 应始终与报告中的印象部分结合解读,以促进检查结果向转诊医师传达并给出后续患者管理建议。
  • CAD-RADS 提供标准化框架,可惠及教育、研究、同行评议、人工智能开发、临床试验设计、人群健康与质量保证。

研究设计与样本

  • 本文为 SCCT、ACC、ACR 与北美心血管影像学会(NASCI)联合发布的专家共识文件。
  • 共识基于近期临床试验数据与新临床指南更新 CCTA 报告系统。

诊断标准与关键数值

  • 狭窄严重程度分级以患者水平最严重冠状动脉管腔狭窄为准,范围从 CAD-RADS 0(无任何斑块或狭窄)至 CAD-RADS 5(至少一支冠状动脉完全闭塞)。
  • CAD-RADS 分类框架包括狭窄、斑块负荷与修饰符。
  • 修饰符包括使用 CT 血流储备分数(CT-FFR)或心肌 CT 灌注(CTP)评估的病变特异性缺血(当执行时)。
  • 斑块负荷采用 P1 至 P4 描述符表示递增的斑块负荷类别。

临床应用与阅片要点

  • 日常阅片应按患者水平最严重狭窄给出 CAD-RADS 0–5 分级,并在报告中注明斑块负荷 P1–P4。
  • 若进行了 CT-FFR 或 CTP,应在修饰符中报告病变特异性缺血评估结果。
  • CAD-RADS 分级须与报告印象结合解读,并向转诊医师给出后续管理建议。
英文原文(摘要)· 点击展开

J Am Coll Radiol. 2022 Nov;19(11):1185-1212. doi: 10.1016/j.jacr.2022.09.012. ABSTRACT Coronary Artery Disease Reporting and Data System (CAD-RADS) was created to standardize reporting system for patients undergoing coronary CT angiography (CCTA) and to guide possible next steps in patient management. The goal of this updated 2022 CAD-RADS 2.0 is to improve the initial reporting system for CCTA by considering new technical developments in Cardiac CT, including data from recent clinical trials and new clinical guidelines. The updated CAD-RADS classification will follow an established framework of stenosis, plaque burden, and modifiers, which will include assessment of lesion-specific ischemia using CT fractional-flow-reserve (CT-FFR) or myocardial CT perfusion (CTP), when performed. Similar to the method used in the original CAD-RADS version, the determinant for stenosis severity classification will be the most severe coronary artery luminal stenosis on a per-patient basis, ranging from CAD-RADS 0 (zero) for absence of any plaque or stenosis to CAD-RADS 5 indicating the presence of at least one totally occluded coronary artery. Given the increasing data supporting the prognostic relevance of coronary plaque burden, this document will provide various methods to estimate and report total plaque burden. The addition of P1 to P4 descriptors are used to denote increasing categories of plaque burden. The main goal of CAD-RADS, which should always be interpreted together with the impression found in the report, remains to facilitate communication of test results with referring physicians along with suggestions for subsequent patient management. In addition, CAD-RADS will continue to provide a framework of standardization that may benefit education, research, peer-review, artificial intelligence development, clinical trial design, population health and quality assurance with the ultimate goal of improving patient care. PMID: 36436841 | DOI: 10.1016/j.jacr.2022.09.012

来源:指南共识 · 心血管影像,查看原文。版权归原作者所有。

引用

  1. 指南共识 · 心血管影像:CAD-RADS 2.0 - 2022 Coronary Artery Disease - Reporting and Data System.: An expert consensus document of the Society of Cardiovascular Computed Tomography (SCCT), the American College of Cardiology (ACC), the American College of Radiology (ACR) and the North America Society of Cardiovascular Imaging (NASCI)

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。