CAD-RADS™ 2.0:2022 冠状动脉疾病报告与数据系统专家共识
CAD-RADS 2.0 是 SCCT、ACC、ACR、NASCI 联合发布的 2022 年更新版专家共识,用于标准化 CCTA 报告并指导患者管理。新版本在原有狭窄分级框架上纳入斑块负荷(P1–P4)和缺血评估修饰符(CT-FFR 或 CTP),以最严重管腔狭窄确定每患者 CAD-RADS 分级(0–5)。
要点
- 按每患者最严重冠状动脉管腔狭窄确定 CAD-RADS 0–5 级。
- 新增 P1–P4 斑块负荷描述符,用于估计和报告总斑块负荷。
- 如行 CT-FFR 或 CTP,可加用缺血修饰符评估病变特异性缺血。
核心结论
- CAD-RADS 2.0 旨在通过纳入心脏 CT 新技术进展、近期临床试验数据和新的临床指南,改进 CCTA 初始报告系统。
- CAD-RADS 应始终与报告中的 impression 一起解读,以促进与转诊医生的沟通并建议后续患者管理。
研究设计与样本
- 该文件为 SCCT、ACC、ACR 和 NASCI 联合发布的专家共识文件。
- 共识基于近期临床试验数据和新的临床指南更新 2022 版 CAD-RADS 2.0 报告系统。
关键影像表现/征象
- 狭窄严重程度分级以每患者最严重冠状动脉管腔狭窄为准,范围从 CAD-RADS 0(无任何斑块或狭窄)至 CAD-RADS 5(至少一条冠状动脉完全闭塞)。
- 斑块负荷采用 P1 至 P4 描述符表示斑块负荷递增的类别。
- 当行 CT-FFR 或心肌 CTP 时,可评估病变特异性缺血作为修饰符。
诊断标准与关键数值
- CAD-RADS 分级框架包括狭窄、斑块负荷和修饰符。
- 每患者狭窄严重程度以最严重冠状动脉管腔狭窄确定,CAD-RADS 0 表示无斑块或狭窄,CAD-RADS 5 表示至少一条冠状动脉完全闭塞。
- 斑块负荷采用 P1–P4 描述符表示递增的斑块负荷类别。
临床应用与阅片要点
- 报告应按每患者最严重管腔狭窄确定 CAD-RADS 分级,并同时描述斑块负荷(P1–P4)。
- 如行 CT-FFR 或 CTP,应在报告中纳入病变特异性缺血评估结果作为修饰符。
- CAD-RADS 分级应与报告中的 impression 一起解读,并向转诊医生提供后续管理建议。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
Coronary Artery Disease Reporting and Data System (CAD-RADS) was created to standardize reporting system for patients undergoing coronary CT angiography (CCTA) and to guide possible next steps in patient management. The goal of this updated 2022 CAD-RADS 2.0 is to improve the initial reporting system for CCTA by considering new technical developments in Cardiac CT, including data from recent clinical trials and new clinical guidelines. The updated CAD-RADS classification will follow an established framework of stenosis, plaque burden, and modifiers, which will include assessment of lesion-specific ischemia using CT fractional-flow-reserve (CT-FFR) or myocardial CT perfusion (CTP), when performed. Similar to the method used in the original CAD-RADS version, the determinant for stenosis severity classification will be the most severe coronary artery luminal stenosis on a per-patient basis, ranging from CAD-RADS 0 (zero) for absence of any plaque or stenosis to CAD-RADS 5 indicating the presence of at least one totally occluded coronary artery. Given the increasing data supporting the prognostic relevance of coronary plaque burden, this document will provide various methods to estimate and report total plaque burden. The addition of P1 to P4 descriptors are used to denote increasing categories of plaque burden. The main goal of CAD-RADS, which should always be interpreted together with the impression found in the report, remains to facilitate communication of test results with referring physicians along with suggestions for subsequent patient management. In addition, CAD-RADS will continue to provide a framework of standardization that may benefit education, research, peer-review, artificial intelligence development, clinical trial design, population health and quality assurance with the ultimate goal of improving patient care. Keywords: Coronary Artery Disease, Coronary CTA, CAD-RADS, Reporting and Data System, Stenosis Severity, Report Standardization Terminology, Plaque Burden, Ischemia Supplemental material is available for this article. This article is published synchronously in Radiology: Cardiothoracic Imaging, Journal of Cardiovascular Computed Tomography, JACC: Cardiovascular Imaging, Journal of the American College of Radiology, and International Journal for Cardiovascular Imaging. © 2022 Society of Cardiovascular Computed Tomography. Published by RSNA with permission.
引用
- Cury, Leipsic, Abbara, et al. CAD-RADS™ 2.0 - 2022 Coronary Artery Disease - Reporting and Data System An Expert Consensus Document of the Society of Cardiovascular Computed Tomography (SCCT), the American College of Cardiology (ACC), the American College of Radiology (ACR) and the North America Society of Cardiovascular Imaging (NASCI). Radiol Cardiothorac Imaging. 2022. PMID: 36339062. doi:10.1148/ryct.220183
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。