超声成像为创建个性化耳廓植入物的三维模型提供有前景的替代方案
本研究以微CT为高分辨率参考标准,比较三维超声、CT和MRI对外耳及耳廓软骨结构的成像精度,用于创建患者特异性三维模型。结果显示CT精度显著低于其他方法(RMS 1.30±0.5 mm),MRI(RMS 0.69±0.2 mm)与超声(RMS 0.55±0.1 mm)之间无显著差异,且超声成本仅为MRI的一半。
要点
- 超声创建耳廓软骨三维模型的精度与MRI无显著差异(RMS 0.55±0.1 mm vs 0.69±0.2 mm)。
- CT精度显著低于超声和MRI(RMS 1.30±0.5 mm),且组织间对比度最差。
- 超声是成本最低的成像方法,费用仅为MRI的一半。
核心结论
- 三维超声可作为对外耳及耳廓软骨结构成像的可用选择,其创建三维模型的精度与MRI无显著差异,且成本仅为MRI的一半;CT精度显著低于其他方法且组织对比度最差。
研究设计与样本
- 以微CT为高分辨率参考标准(金标准),比较三维超声、CT和MRI对外耳及耳廓软骨结构的成像精度;将超声图像分割创建耳廓软骨三维模型,并与微CT生成的三维模型比较以评估精度。
关键影像表现/征象
- CT的组织间对比度最差,且精度显著低于其他方法(RMS 1.30±0.5 mm)。
- MRI与超声之间精度无显著差异(MRI RMS 0.69±0.2 mm,超声 RMS 0.55±0.1 mm)。
- 超声是成本最低的成像方法,费用为MRI的一半。
诊断标准与关键数值
- 以微CT为高分辨率参考标准(金标准),采用均方根误差(RMS)评估三维模型精度。
- CT的RMS为1.30±0.5 mm,显著低于其他方法。
- MRI的RMS为0.69±0.2 mm,超声的RMS为0.55±0.1 mm,两者间无显著差异。
临床应用与阅片要点
- 超声可作为低成本成像技术用于创建患者特异性三维模型和植入物,支持其在生物制造中更广泛的应用。
- 原文指出三维超声为外耳及耳廓软骨结构成像提供了此前未展示过的新用途。
局限性
- 原文未报告局限性
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
Three-dimensional imaging and advanced manufacturing are being applied in health care research to create novel diagnostic and surgical planning methods, as well as personalised treatments and implants. For ear reconstruction, where a cartilage-shaped implant is embedded underneath the skin to re-create shape and form, volumetric imaging and segmentation processing to capture patient anatomy are particularly challenging. Here, we introduce 3-D ultrasound (US) as an available option for imaging the external ear and underlying auricular cartilage structure, and compare it with computed tomography (CT) and magnetic resonance imaging (MRI) against micro-CT (µCT) as a high-resolution reference (gold standard). US images were segmented to create 3-D models of the auricular cartilage and compared against models generated from µCT to assess accuracy. We found that CT was significantly less accurate than the other methods (root mean square [RMS]: 1.30 ± 0.5 mm) and had the least contrast between tissues. There was no significant difference between MRI (RMS: 0.69 ± 0.2 mm) and US (0.55 ± 0.1 mm). US was also the least expensive imaging method at half the cost of MRI. These results unveil a novel use of ultrasound imaging that has not been presented before, as well as support its more widespread use in biofabrication as a low-cost imaging technique to create patient-specific 3D models and implants.
引用
- Ross, Antico, McMahon, et al. Ultrasound Imaging Offers Promising Alternative to Create 3-D Models for Personalised Auricular Implants. Ultrasound Med Biol. 2021. PMID: 34848081. doi:10.1016/j.ultrasmedbio.2021.10.013
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。