螺旋3D DSA全头颈血管成像技术开发与首次人体应用
本研究开发了一种基于机器人C臂系统400°旋转加轴向平移的连续螺旋扫描轨迹3D DSA技术,用于头颈部全程血管成像。通过体模实验、两只猪体内成像及一例双侧颈动脉疾病患者验证可行性。结果显示该技术可单次注射单次采集完成从主动脉弓到颅顶的全景3D血管成像。
要点
- 单次采集即可覆盖主动脉弓至颅顶全部头颈血管,减少多次选择性插管和造影剂用量
- 空间分辨率与常规3D DSA相当,Catphan 700测试达11线对/厘米
- 猪模型采用未稀释造影剂10 mL/sec注射获得诊断级图像质量
核心结论
- 螺旋扫描轨迹3D DSA技术可行,单次采集即可完成从主动脉弓到颅顶的全景3D血管成像,同时保持高空间分辨率和对比度保真度
研究设计与样本
- 研究类型为技术开发与可行性研究,包含体模实验、两只猪体内成像优化、一例双侧颈动脉疾病患者人体可行性验证
- 设备为机器人C臂系统,采用400°旋转加同步轴向平移的连续螺旋扫描轨迹
- 体模实验包括Catphan 700空间分辨率测试和模拟头颈部血管体模对比噪声比评估
- 人体病例为双侧颈动脉疾病患者,参考标准为常规3D DSA狭窄率测量
关键影像表现/征象
- 螺旋扫描纵向覆盖达419.4 mm,常规3D DSA为174.0 mm;螺旋扫描用时7.6秒,常规3D DSA为5.0秒
- Catphan 700测试空间分辨率为11线对/厘米,与常规3D DSA相当
- 模拟头颈血管体模中两种技术对比噪声比的平均绝对百分比误差为2.18%±0.68
- 人体病例中螺旋3D DSA实现从主动脉弓到颅顶的连续3D血管成像
诊断标准与关键数值
- 常规3D DSA纵向覆盖174.0 mm,采集时间5.0秒;螺旋3D DSA覆盖419.4 mm,采集时间7.6秒
- 空间分辨率在Catphan 700测试为11线对/厘米,与常规3D DSA等效
- 模拟体模中对比噪声比平均绝对百分比误差为2.18%±0.68
- 猪模型中未稀释造影剂以10 mL/sec注射产生诊断级图像质量,三名阅片者组内相关系数大于0.90
- 人体病例左颈内动脉眼段狭窄率测量中两方法间平均绝对误差为2.57%±0.90
临床应用与阅片要点
- 头颈部血管评估可减少多次选择性插管和多次造影剂注射,降低操作复杂性和造影剂用量
- 单次注射单次采集实现全头颈范围全景3D血管成像,适合双侧颈动脉疾病等需大范围评估的场景
- 空间分辨率与常规3D DSA等效,可用于狭窄评估而不损失图像细节
局限性
- 人体可行性研究仅纳入一例患者,样本量极为有限
- 猪模型仅两只,造影剂注射方案优化基于有限动物数据
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
Background Conventional three-dimensional (3D) digital subtraction angiography (DSA) has limited longitudinal coverage, requiring multiple selective injections and acquisitions for head-and-neck vascular assessment, increasing procedural complexity and contrast material use. Purpose To develop and evaluate the feasibility of a helical 3D DSA technique for panoramic 3D angiography of the entire head-and-neck vasculature using a single contrast material injection and a single acquisition. Materials and Methods A continuous helical scanning trajectory was implemented on a robotic C-arm system using 400° rotation with simultaneous axial translation. The technique was evaluated in phantom experiments to assess geometric accuracy and imaging performance, in vivo imaging in two swine to optimize contrast material injection protocols, and a feasibility study in a human patient with bilateral carotid disease. Results The helical scan achieved a longitudinal coverage of 419.4 mm within 7.6 seconds (conventional 3D DSA: 174.0 mm within 5.0 seconds). Spatial resolution was preserved at 11 line pairs per centimeter on Catphan 700 testing, equivalent to that of conventional 3D DSA. In a simulated head-and-neck vascular phantom, the mean absolute percentage error in contrast to noise ratio between the two techniques was 2.18% ± 0.68 (SD). In two swine, undiluted contrast agent injected at 10 mL/sec produced diagnostically adequate image quality, with high interreader agreement among three readers (intraclass correlation coefficient > 0.90). In the human case, helical 3D DSA enabled continuous 3D angiography from the aortic arch to the cranial vertex in a single acquisition. Stenosis rate measurements in the ophthalmic segment of the left internal carotid artery showed strong agreement between methods, with a mean absolute error of 2.57% ± 0.90. Conclusion This study demonstrated the feasibility of a helical scanning trajectory in 3D DSA, achieving panoramic 3D angiography from the aortic arch to the cranial vertex in a single acquisition while preserving high spatial resolution and contrast fidelity. © The Author(s) 2026. Published by the Radiological Society of North America under a CC BY 4.0 license. Supplemental material is available for this article.
引用
- He, Li, Wu, et al. Helical 3D DSA for Whole-Head-and-Neck Vascular Imaging: Technical Development and First-in-Human Application. Radiology. 2026. PMID: 42742383. doi:10.1148/radiol.260398
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。