文献速递胸部技术与安全CT

低剂量CT与三维分割下肺结节影像组学特征稳定性:体模与多中心评估

Radiomic Feature Stability in Low-Dose CT and 3D Segmentation for Pulmonary Nodules: Phantom and Multicenter Evaluation.
PubMed 文献 · Radiol Cardiothorac Imaging · 2026-01-01

该研究通过体模实验在多家中心的多台CT设备上分析肺结节影像组学特征的测试-再测试变异和采集参数变异,利用人工智能三维自动分割方法评估特征稳定性。结果确定了466个稳定影像组学特征构成的子集,并在多中心临床磨玻璃结节数据中构建模型进行验证。与预筛选特征模型相比,稳定特征模型在验证集上显示出更好的临床效能和预测性能(AUC范围0.86至0.90)。

要点

  • 层厚/层间距、低剂量扫描、不同CT设备和FOV是影响影像组学特征变异的主要因素。
  • 稳定影像组学特征子集构成的多模型在验证集的AUC为0.86至0.90,优于预筛选特征模型。
  • 采用自动化三维分割方法和稳定特征子集有助于提高肺结节影像组学的可重复性。

核心结论

  • 层厚、FOV、不同CT设备间的差异和低剂量设置显著影响肺结节影像组学特征的稳定性。
  • 研究确定了466个稳定影像组学特征子集,并证明其在多中心临床磨玻璃结节数据中具有临床应用价值。

研究设计与样本

  • 研究类型为体模实验与多中心临床验证相结合的影像组学可重复性研究。
  • 多中心CT扫描仪在扫描剂量、扫描参数和重建参数变化条件下采集含人工肺结节的胸部体模图像。
  • 图像分割采用基于人工智能的全自动三维分割方法。
  • 变异来源包括测试-再测试变异、不同CT设备间变异和同一CT设备内变异。
  • 特征稳定性通过一致性相关系数(CCC)、动态范围和组内相关系数(ICC)评估。

关键影像表现/征象

  • 在测试-再测试变异方面,2264个特征中有1715个(76%)可重复,CCC大于0.9。
  • 不同CT设备间变异的可重复率为64%(2264个特征中1439个,ICC大于0.9)。
  • 方差成分分析显示层厚/层间距、低剂量扫描、不同CT设备间变异和FOV是特征变异的主要来源。

诊断标准与关键数值

  • 测试-再测试可重复特征定义为CCC大于0.9,占2264个特征的76%(1715个)。
  • 不同CT设备间可重复特征定义为ICC大于0.9,占2264个特征的64%(1439个)。
  • 层厚/层间距对特征变异的贡献占比为24.9%,低剂量扫描为24.3%,不同CT设备间变异为17.5%,FOV为14.9%。
  • 通过UpSet图确定的稳定影像组学特征子集包含466个特征。
  • 稳定特征构建的六个影像组学模型在验证集上的AUC范围为0.86(95%CI:0.81,0.91)至0.90(95%CI:0.86,0.94)。

临床应用与阅片要点

  • 在日常肺结节影像组学分析中应优先采用对层厚、剂量、设备和FOV变化较稳定的特征子集。
  • 报告影像组学结果时需注意不同CT设备和采集参数可能导致特征漂移,应优先关注可重复性较好的特征。
  • 自动三维分割方法结合稳定特征模型可提高临床磨玻璃结节诊断的稳健性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

Purpose To identify a stable radiomic feature (RF) subset for pulmonary nodules by analyzing test-retest and acquisition parameter variability using phantoms and to evaluate its clinical utility. Materials and Methods CT scanners at multiple centers were used to scan a chest phantom embedded with artificial pulmonary nodules under varied doses and scanning and reconstruction parameters. An artificial intelligence-based, fully automated three-dimensional segmentation method was used. Three sources of variability were examined: test-retest, inter-CT scanner, and intra-CT scanner. RF stability was assessed using the concordance correlation coefficient (CCC), dynamic range, and intraclass correlation coefficient (ICC). Statistical tests were used to analyze the impact of these factors, with stable RFs identified through UpSet plots. Multiple radiomic models were constructed and validated using multicenter clinical ground-glass nodule data. Results In terms of test-retest variability, repeatable RFs represented 1715 of 2264 features (76%, CCC > 0.9). The reproducibility rate for inter-CT variability was 64% (1439 of 2264 features, ICC > 0.9). Variance component analysis identified section thickness/interval (24.9%), low-dose scanning (24.3%), inter-CT scanner variation (17.5%), and field of view (FOV, 14.9%) as the largest contributors to radiomic feature variability, with consistent influence patterns across all acquisition parameters. A stable subset of 466 RFs was used to construct six radiomics models, which, compared with prescreening RF models, demonstrated greater clinical efficacy and predictive performance on the validation sets (AUC range, 0.86 [95% CI: 0.81, 0.91] to 0.90 [95% CI: 0.86, 0.94)]. Conclusion Variations in section thickness, FOV, interscanner differences, and low-dose settings significantly affected RF stability. A stable RF subset for pulmonary nodules was identified and demonstrated clinical utility. Keywords: Phantom Studies, Applications-CT, Clinical Testing, Machine Learning, Model Training, Model Validation, Radiomics, Pulmonary, Lung, Pulmonary Nodule, Computed Tomography, Repeatability, Reproducibility Supplemental material is available for this article. © The Author(s) 2026. Published by the Radiological Society of North America under a CC BY 4.0 license.

来源:Radiol Cardiothorac Imaging,查看原文。版权归原作者所有。

引用

  1. Zhang, Zhuo, Zhan, et al. Radiomic Feature Stability in Low-Dose CT and 3D Segmentation for Pulmonary Nodules: Phantom and Multicenter Evaluation. Radiol Cardiothorac Imaging. 2026. PMID: 42658069. doi:10.1148/ryct.250464

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。