MRI 腹部体成分自动分析算法开发及与 CT 对照验证
本研究开发了基于 3D nnU-Net 的深度学习算法,用于在 MRI 数据中自动分割腹部内脏脂肪、皮下脂肪和骨骼肌。算法在外部 MRI 数据集上取得较高 Dice 系数,并在 54 例同时行 MRI 与 CT 的患者中与 CT 商业工具测量进行对照。结果显示 MRI 与 CT 测量相关性极强(r>0.95),但绝对一致性欠佳,提示临床应用需建立模态特异性参考值。
要点
- MRI 与 CT 体成分测量相关性极强(r>0.95),可反映相同生物学信息。
- MRI 与 CT 绝对一致性欠佳,内脏脂肪差异最大,临床判读不能直接套用 CT 阈值。
- 该算法可自动检测 L3 水平并完成 2D 面积与 3D 体积分析,有望减少手动勾画负担。
核心结论
- 该深度学习算法可实现 MRI 腹部体成分的精确 3D 分割,但 MRI 与 CT 测量之间存在系统差异,临床应用需建立模态特异性参考值。
研究设计与样本
- 算法开发与外部验证研究;训练集为 105 例全身双回波 MRI 扫描,外部测试集为 67 例腹部 MRI 扫描。
- 54 例同时具备 MRI 与 CT 检查的患者用于跨模态一致性评估,MRI 使用同相位图像由本研究算法测量,CT 使用商业工具测量。
- 跨模态评估同时涵盖 3D 体积与自动检测的 L3 水平 2D 面积,采用 Pearson 相关、组内相关系数(ICC)和 Bland-Altman 分析。
关键影像表现/征象
- 算法对同相位 MRI 中 3D 分割的平均 Dice 系数:腹部内脏脂肪 0.862,腹部皮下脂肪 0.923,骨骼肌 0.920。
- 算法对反相位 MRI 中 3D 分割的平均 Dice 系数:腹部内脏脂肪 0.823,腹部皮下脂肪 0.913,骨骼肌 0.906。
- MRI 与 CT 在 3D 和 2D 两种方法中均呈强相关(r>0.95,p<0.001)且整体一致性优秀(ICC>0.95)。
- 模态间绝对一致性欠佳,以内脏脂肪最突出:3D 的 95% 一致性界限为 -8.0%~35.9%,2D 为 -43.7%~65.6%。
诊断标准与关键数值
- 分割性能以 Dice 相似系数评价,同相位 3D 分割腹部内脏脂肪、皮下脂肪、骨骼肌的平均 DSC 分别为 0.862、0.923、0.920。
- MRI 与 CT 的相关性在 3D 和 2D 分析中均满足 r>0.95,p<0.001;组内相关系数均满足 ICC>0.95。
临床应用与阅片要点
- 报告 MRI 体成分结果时应注明测量模态(MRI 或 CT),避免将 CT 建立的正常值或阈值直接套用于 MRI。
- 内脏脂肪的模态间绝对差异最大,跨模态比较或随访时需格外谨慎,必要时保持同一模态纵向追踪。
- L3 水平 2D 面积与 3D 体积均与 CT 高度相关,日常报告可优先采用自动检测的 L3 单层测量以提高效率。
局限性
- 本研究 54 例跨模态对照样本量有限,且未说明纳入患者的具体临床背景。
- 原文仅报告了外部 MRI 测试集的 Dice 系数,未提供 CT 端分割精度的直接验证数据。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
AIM: To develop a deep learning-based algorithm for automated segmentation of MRI data for abdominal body composition analysis and to validate its effectiveness against CT-based analysis.
MATERIALS AND METHODS: We developed a 3D nnU-Net-based deep learning algorithm to segment three key body components in MRI data: abdominal visceral fat [AVF], abdominal subcutaneous fat [ASF], and skeletal muscle [SM]. The model was trained on 105 whole-body dual-echo MRI scans, and its segmentation performance was evaluated using the dice similarity coefficient (DSC) on an external dataset of 67 abdominal MRI scans. In a cohort of 54 patients with both MRI and CT exams, cross-modality correlation and agreement were assessed between in-phase MRI measurements (from our algorithm) and CT measurements (from a commercial tool) using Pearson's correlation, intraclass correlation coefficient (ICC), and Bland-Altman analysis for both 3D volume and 2D area (at the auto-detected L3 level).
RESULTS: The algorithm achieved mean DSCs of 0.862, 0.923, and 0.920 for in-phase and 0.823, 0.913, and 0.906 for opposed-phase 3D segmentation of the AVF, ASF, and SM on the external MRI dataset. MRI-based measurements demonstrated a strong correlation (r>0.95, p<0.001) and excellent overall agreement (ICC>0.95) with CT-based measurements in both 3D and 2D approaches. However, absolute agreement between modalities was less favorable, particularly for AVF, with wide 95% limits of agreement: -8.0%-35.9% for 3D and -43.7%-65.6% for 2D.
CONCLUSION: Our algorithm enables accurate MRI-based 3D segmentation of abdominal body composition; however, modality-specific reference values are needed for clinical application given the systematic differences between MRI and CT measurements.
引用
- Jeon, Joo, Lee, et al. Automated analysis of abdominal body composition using MRI: algorithm development and validation via CT comparison. Clin Radiol. 2026. PMID: 42556296. doi:10.1016/j.crad.2026.107437
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。