文献速递介入神经技术与安全CTDSA

血管内支架电极植入的多模态影像工作流程:体模技术可行性

A Multimodal Imaging Workflow for Intraprocedural Targeting of Endovascular Stentrode Deployment: Technical Feasibility in a Phantom Model.
PubMed 文献 · AJNR Am J Neuroradiol · 2026-07-29

本研究在人体头部体模中模拟 Stentrode 支架电极植入的术前与术中影像步骤,评估多模态影像工作流程的技术可行性。流程包括薄层 CT、DICOM 传输至核心实验室标记靶区、标记后 CT 回传、三维旋转血管造影及与透视融合显示。结果显示该工作流程可成功生成术中靶向引导,无明显配准误差或伪影。

要点

  • 薄层 CT 可用于 Stentrode 植入靶区的解剖分析与核心实验室标记
  • 标记后 CT 与三维旋转血管造影融合无明显配准误差或伪影
  • 该多模态工作流程可将术前规划转化为术中透视引导

核心结论

  • 该多模态影像工作流程在体模中技术上可行,可为 Stentrode 植入提供术中靶向引导

研究设计与样本

  • 非临床、术前技术可行性评估,使用人体头部体模模拟影像步骤
  • 影像流程包括薄层 CT 采集、DICOM 传输至外部核心实验室标记、标记后 CT 回传、三维旋转血管造影、标记重建配准及术中透视显示

关键影像表现/征象

  • 薄层 CT 提供了适合解剖分析的数据集,核心实验室成功标记预期植入区域
  • 标记在传输和回传过程中得到保留
  • 标记后的 CT 与三维旋转血管造影成功融合,定性评估无明显配准误差或伪影

临床应用与阅片要点

  • 可将术前薄层 CT 规划经核心实验室标记后与三维旋转血管造影融合,用于术中透视引导
  • 标记在 DICOM 传输和回传过程中可保持稳定,适用于跨中心协作的靶区标记流程

局限性

  • 本研究为体模评估,非临床研究,未在人体验证该工作流程
  • 未提供定量配准精度数据,仅作定性评估无明显误差或伪影

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

The Stentrode (Synchron) is a self-expanding nitinol stent brain-computer interface device deployed within the superior sagittal sinus adjacent to the precentral gyrus. Millimetric precision is required, underscoring the need for a reproducible imaging workflow translating preoperative planning into intraprocedural guidance. This non-clinical, preprocedural technical feasibility assessment used a human head model to simulate imaging steps. The workflow included thin-section CT acquisition; DICOM transfer to an external core lab for target identification and marking; re-importation of marked CT; 3D rotational angiography; and co-registration with marker reconstruction and intraprocedural display on live fluoroscopy. The CT provided a suitable dataset for anatomical analysis, and the core lab successfully marked the intended deployment region. Markers were preserved during transfer and re-importation. The annotated CT was successfully fused with 3DRA, without qualitatively apparent misalignment or artifact. This workflow was technically feasible for generating intraprocedural targeting guidance for Stentrode deployment.

来源:AJNR Am J Neuroradiol,查看原文。版权归原作者所有。

引用

  1. De Toledo, Gutierrez-Aguirre, Nogueira, et al. A Multimodal Imaging Workflow for Intraprocedural Targeting of Endovascular Stentrode Deployment: Technical Feasibility in a Phantom Model. AJNR Am J Neuroradiol. 2026. PMID: 42527303. doi:10.3174/ajnr.A9551

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。