文献速递骨肌儿科影像技术与安全DR

基于深度学习的全下肢X线片自动腿长测量

Computer-aided automatic measurement of leg length on full leg radiographs.
PubMed 文献 · Skeletal Radiol · 2021-09-30

本研究回顾性纳入2767例患者全下肢X线片,开发级联深度学习模型自动定位骨盆、膝、踝标志点并测量腿长。在400例测试集中(含100例有骨科植入物),深度学习测量与参考标准高度一致(全腿长r=1.0,RMSE=0.19 cm),平均每例测量时间8.68秒,性能与放射科医生相当。

要点

  • 深度学习系统可自动测量股骨、胫骨及全腿长,与参考标准高度一致。
  • 对带有骨科植入物的患者,系统仍保持与无植入物者相似的准确性。
  • 单例测量时间约8.68秒,有望提升临床工作效率。

关键影像表现/征象

  • 深度学习系统自动定位骨盆、膝关节和踝关节的标志点以测量腿长。
  • 在含有或不含内固定装置的患者中,深度学习测量的腿长与参考标准均显示高度一致性。

诊断标准与关键数值

  • 股骨长度:r=0.99(P < .001),RMSE=0.17 cm,平均差-0.01 ± 0.17 cm,95%一致性界限-0.35至0.34 cm。
  • 胫骨长度:r=0.99(P < .001),RMSE=0.17 cm,平均差-0.02 ± 0.17 cm,95%一致性界限-0.34至0.31 cm。
  • 全腿长度:r=1.0(P < .001),RMSE=0.19 cm,平均差0.05 ± 0.18 cm,95%一致性界限-0.31至0.40 cm。

临床应用与阅片要点

  • 可用于日常全下肢X线片的腿长自动测量,尤其适用于带骨科植入物的患者。
  • 测量结果与参考标准高度一致,可作为放射科医生测量的辅助工具。
  • 单例测量时间约8.68秒,有助于提高工作效率。

局限性

  • 本研究为回顾性设计。
  • 原文未报告多中心外部验证结果。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

OBJECTIVES: To develop and evaluate a deep learning (DL)-based system for measuring leg length on full leg radiographs of diverse patients, including those with orthopedic hardware implanted for surgical treatment.

METHODS: This study retrospectively assessed 2767 X-ray scanograms of 2767 patients who did or did not have orthopedic hardware implanted between January 2016 and December 2019. A cascaded DL model was developed to localize the relevant landmarks on the pelvis, knees, and ankles required for measuring leg length. Statistical analysis was performed using the correlation coefficient analysis and Bland-Altman plots to assess the agreement between the reference standard and DL-calculated lengths.

RESULTS: Testing data comprised 400 radiographs from 400 patients. Of these radiographs, 100 were from patients with orthopedic hardware implanted in their pelvis, knees, or ankles. For all testing data, leg lengths derived from the DL-based measurement system, with or without internal fixation devices, showed excellent agreement with the reference standard (femoral length, r = 0.99 (P < .001); root mean square error (RMSE) = 0.17 cm; mean difference, - 0.01 ± 0.17 cm; 95% limit of agreement (LoA), - 0.35 to 0.34; tibial length, r = 0.99 (P < .001); RMSE = 0.17 cm; mean difference, - 0.02 ± 0.17 cm, 95% LoA, - 0.34 to 0.31; and full leg length, r = 1.0 (P < .001); RMSE = 0.19 cm; mean difference, 0.05 ± 0.18 cm; 95% LoA, - 0.31 to 0.40). The mean time for leg length measurement for each patient using the DL-based system was 8.68 ± 0.18 s.

CONCLUSION: The DL-based leg length measurement system could provide similar performance to radiologists in terms of accuracy and reliability for a diverse group of patients.

来源:Skeletal Radiol,查看原文。版权归原作者所有。

引用

  1. Lee CS, Lee MS, Byon SS, et al. Computer-aided automatic measurement of leg length on full leg radiographs. Skeletal Radiol. 2021. PMID: 34595544. doi:10.1007/s00256-021-03928-z

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。