正颌手术疗效评估的计算机断层扫描影像重叠方案:一项系统评价及综合建议
该系统评价纳入13项研究,分析三维CT重叠方案评估正颌及面颌手术前后牙颌面变化的准确性、可重复性和效率。基于体素的重叠方案准确性和可重复性最高,自动化且单一软件方案效率最高。
要点
- 基于体素的重叠方案准确性和可重复性最高,平移准确性平均差异0.05-1.76 mm,旋转准确性0.10-1.09°。
- 总体可重复性良好,平均误差范围0.01-0.26 mm,相关系数范围0.53-1.00。
- 自动化且仅使用一个软件的重叠方案效率最高,完成虚拟重叠的时间从数秒至40分钟不等。
核心结论
- 基于体素的重叠方案准确性和可重复性最高,使用自动化流程且仅涉及一个软件的重叠方案效率最高。
研究设计与样本
- 系统评价,纳入13项研究;其中10项报告准确性数据、10项报告可重复性数据、5项报告效率数据;CBCT是最常用成像技术,用于10项研究;检索包括主检索(PubMed、EMBASE、Cochrane Library、LILACS和SciELO)、灰色文献检索(Google Scholar和Open Grey)及手工检索。
诊断标准与关键数值
- 大多数方法准确性高,平均差异小于体素尺寸:平移准确性范围0.05-1.76 mm,旋转准确性范围0.10-1.09°;总体可重复性良好,平均误差范围0.01-0.26 mm,相关系数范围0.53-1.00;完成虚拟重叠技术的时间从数秒至40分钟。
临床应用与阅片要点
- 七项研究提出或评估基于体素的重叠方法,三项研究关注基于表面的技术,一项研究比较基于表面和基于体素的重叠方案,一项研究使用最大互信息算法,一项研究描述基于标志点的重叠方法。
局限性
- 原文未报告局限性
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
OBJECTIVES: A systematic review was performed to analyze the current evidence on three-dimensional (3D) computed tomography (CT) superimposition protocols used to assess dentomaxillofacial changes after orthognathic and orthofacial surgery. Accuracy, reproducibility, and efficiency were evaluated.
METHODS: The search was divided into Main Search (PubMed, EMBASE, Cochrane Library, LILACS, and SciELO), Grey Literature search (Google Scholar and Open Grey), and Manual search. Thirteen studies were included. Of these, 10 reported data on accuracy, 10 on reproducibility and five on efficiency. Seven proposed or evaluated methods of voxel-based superimposition, three focused on the surface-based technique, one compared surface- and voxel-based superimposition protocols, one used the maximum mutual information algorithm, and one described a landmark-based superimposition method. Cone-beam computed tomography (CBCT) was the most common imaging technique, being used in 10 studies.
RESULTS: The accuracy of most methods was high, showing mean differences smaller than voxels' dimensions, ranging between 0.05 and 1.76 mm for translational accuracy, and 0.10-1.09° for rotational accuracy. The overall reproducibility was considered good as demonstrated by the small mean error (range: 0.01-0.26 mm) and high correlation coefficients (range: 0.53-1.00). Timing to complete virtual superimposition techniques ranged between a few seconds up to 40 min.
CONCLUSIONS: Voxel-based superimposition protocols presented the highest accuracy and reproducibility. Moreover, superimposition protocols that used automated processes and involved only one software were the most efficient.
引用
- Andriola FO, Haas Junior OL, Guijarro-Martínez R, et al. Computed tomography imaging superimposition protocols to assess outcomes in orthognathic surgery: a systematic review with comprehensive recommendations. Dentomaxillofac Radiol. 2021. PMID: 34520241. doi:10.1259/dmfr.20210340
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。