多焦点热应变成像用于深部组织脂质识别
本研究在商用凸阵探头上实现热应变成像,采用多焦点波束合成扩大加热区域,在模拟和体模实验中验证压力场并高对比度识别脂质。
要点
- 多焦点波束合成可扩大加热区域至轴向32–96 mm、横向-7至+7 mm。
- 热应变成像可在安全声功率下高对比度识别橡胶包涵体和脂肪组织。
- 该技术有望用于深部组织脂质沉积相关疾病的超声诊断。
局限性
- 仅体模验证,未在人体或临床环境中评估。
- 样本量小,仅包含橡胶和脂肪两种包涵体。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
Thermal strain imaging (TSI) is an ultrasound-based imaging technique intended primarily for diseases in which lipid accumulation is the main biomarker. The goal of the research described here was to successfully implement TSI on a single, commercially available curved linear array transducer for heating and imaging of organs at a deeper depth. For an effective temperature rise of the tissue over a large area, which is key to TSI performance, an innovative multifocus beamforming approach was applied. This yielded a heating area from 32 to 96 mm in the axial direction and -7 to +7 mm in the lateral direction. The pressure fields generated from simulation were in agreement with pressure fields measured with the hydrophone. TSI with safe acoustic power identified with high contrast a rubber inclusion and liposuction fat tissue embedded in a gelatin block.
引用
- Khalid WB, Chen X, Kim K, et al. Multifocus Thermal Strain Imaging Using a Curved Linear Array Transducer for Identification of Lipids in Deep Tissue. Ultrasound Med Biol. 2021. PMID: 33931283. doi:10.1016/j.ultrasmedbio.2021.03.005
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。