基于MRI数据的三维打印解剖模型:现状与适用临床场景的图像采集建议
该文旨在调查文献中使用MRI创建3D打印解剖模型用于手术规划的普及程度,并为MRI最适合的临床场景提供图像采集建议。文章指出CT因图像质量高且分割相对容易而最常用于3D打印,但MRI具有软组织对比度优势和避免电离辐射的优点,尽管需要复杂的技术和耗时的后处理。证据等级2,技术效能5。
要点
- MRI用于3D打印解剖模型可提供优良软组织对比且无电离辐射。
- CT仍是3D打印最常用的影像模态,因分割相对容易。
- MRI创建3D打印模型需复杂成像技术和耗时后处理。
核心结论
- 尽管MRI在3D打印中的应用远少于CT,但凭借软组织对比优势和避免电离辐射,MRI在手术规划3D打印中具有广阔前景。
研究设计与样本
- 本文为指南类文献,证据等级2,技术效能5,旨在调查文献中MRI用于3D打印解剖模型的普及程度并提供图像采集建议。
临床应用与阅片要点
- 在需要精细软组织器官分割以进行手术规划的场景中,可优先考虑使用MRI数据创建3D打印解剖模型。
- 使用MRI数据时需注意其成像技术复杂且后处理耗时,应合理规划工作流程。
局限性
- MRI用于3D打印常需复杂成像技术和耗时后处理,可能限制其广泛临床应用。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
Three-dimensional (3D) printing technologies have been increasingly utilized in medicine over the past several years and can greatly facilitate surgical planning thereby improving patient outcomes. Although still much less utilized compared to computed tomography (CT), magnetic resonance imaging (MRI) is gaining traction in medical 3D printing. The purpose of this study was two-fold: 1) to determine the prevalence in the existing literature of using MRI to create 3D printed anatomic models for surgical planning and 2) to provide image acquisition recommendations for appropriate clinical scenarios where MRI is the most suitable imaging modality. The workflow for creating 3D printed anatomic models from medical imaging data is complex and involves image segmentation of the regions of interest and conversion of that data into 3D surface meshes, which are compatible with printing technologies. CT is most commonly used to create 3D printed anatomic models due to the high image quality and relative ease of performing image segmentation from CT data. As compared to CT datasets, 3D printing using MRI data offers advantages since it provides exquisite soft tissue contrast needed for accurate organ segmentation and it does not expose patients to unnecessary ionizing radiation. MRI, however, often requires complicated imaging techniques and time-consuming postprocessing procedures to generate high-resolution 3D anatomic models needed for 3D printing. Despite these challenges, 3D modeling and printing from MRI data holds great clinical promises thanks to emerging innovations in both advanced MRI imaging and postprocessing techniques. EVIDENCE LEVEL: 2 TECHNICAL EFFICATCY: 5.
引用
- Talanki VR, Peng Q, Shamir SB, et al. Three-Dimensional Printed Anatomic Models Derived From Magnetic Resonance Imaging Data: Current State and Image Acquisition Recommendations for Appropriate Clinical Scenarios. J Magn Reson Imaging. 2021. PMID: 34046959. doi:10.1002/jmri.27744
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。