文献速递胸部CT

薄层CT弧形凹陷征:预测纯磨玻璃结节侵袭性的新指标

Arc concave sign on thin-section computed tomography:A novel predictor for invasive pulmonary adenocarcinoma in pure ground-glass nodules.
PubMed 文献 · Eur J Radiol · 2021-03-27

回顾性纳入302例患者共306个≤20mm病理证实的纯磨玻璃结节(141个浸润前病变,165个浸润性病变),在薄层CT上定义弧形凹陷征并以弧弦距/弦长比(AC-R)量化。弧形凹陷征见于21.2%的结节,深弧形凹陷征(AC-R>0.25)在浸润性病变中更常见(P=0.008)。多因素分析显示不规则形状、深弧形凹陷征、最大径>10.1mm及最大密度>-502HU为浸润性的独立危险因素。

要点

  • ≤20mm纯磨玻璃结节出现深弧形凹陷征(AC-R>0.25)提示浸润性可能,需警惕。
  • 联合不规则形状、最大径>10.1mm、最大密度>-502HU可有效区分浸润前与浸润性病变。
  • 弧形凹陷征病理基础为肿瘤表面小叶间隔移位,阅片时注意结节边缘的平滑凹陷。

关键影像表现/征象

  • 弧形凹陷征定义为薄层CT上病灶边缘平滑且凹陷的部分。
  • 弧形凹陷征见于65/306个纯磨玻璃结节(21.2%)。
  • 深弧形凹陷征(AC-R>0.25)在浸润性病变中更常见(P=0.008)。
  • 显微镜下于肿瘤表面可见小叶间隔移位。

诊断标准与关键数值

  • 深弧形凹陷征定义为弧弦距与弦长比(AC-R)大于最佳截断值0.25。

临床应用与阅片要点

  • 阅片时对≤20mm纯磨玻璃结节应观察边缘是否存在平滑凹陷,并测量AC-R,>0.25提示浸润性风险增高。
  • 报告可结合不规则形状、最大径>10.1mm、最大密度>-502HU等独立危险因素综合评估侵袭性。
  • 弧形凹陷征的病理基础为小叶间隔移位,需与分叶、毛刺等其他边缘征象鉴别。

局限性

  • 回顾性单中心研究,样本量有限,结论需外部验证。
  • 弧形凹陷征的观察和AC-R测量可能受读者间差异影响。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

OBJECTIVE: We aimed to investigate the risk factors of invasive pulmonary adenocarcinoma, especially to report and validate the use of our newly identified arc concave sign in predicting invasiveness of pure ground-glass nodules (pGGNs).

METHODS: From January 2015 to August 2018, we retrospectively enrolled 302 patients with 306 pGGNs ≤ 20 mm pathologically confirmed (141 preinvasive lesions and 165 invasive lesions). Arc concave sign was defined as smooth and sunken part of the edge of the lesion on thin-section computed tomography (TSCT). The degree of arc concave sign was expressed by the arc chord distance to chord length ratio (AC-R); deep arc concave sign was defined as AC-R larger than the optimal cut-off value. Logistic regression analysis was used to identify the independent risk factors of invasiveness.

RESULTS: Arc concave sign was observed in 65 of 306 pGGNs (21.2 %), and deep arc concave sign (AC-R > 0.25) were more common in invasive lesions (P = 0.008). Under microscope, interlobular septal displacements were found at tumour surface. Multivariate analysis indicated that irregular shape (OR, 3.558; CI: 1.374-9.214), presence of deep arc concave sign (OR, 3.336; CI: 1.013-10.986), the largest diameter > 10.1 mm (OR, 4.607; CI: 2.584-8.212) and maximum density > -502 HU (OR, 6.301; CI: 3.562-11.148) were significant independent risk factors of invasive lesions.

CONCLUSIONS: Arc concave sign on TSCT is caused by interlobular septal displacement. The degree of arc concave sign can reflect the invasiveness of pGGNs. Invasive lesions can be effectively distinguished from preinvasive lesions by the presence of deep arc concave sign, irregular shape, the largest diameter > 10.1 mm and maximum density > -502 HU in pGGNs ≤ 20 mm.

来源:Eur J Radiol,查看原文。版权归原作者所有。

引用

  1. Fu G, Yu H, Liu J, et al. Arc concave sign on thin-section computed tomography:A novel predictor for invasive pulmonary adenocarcinoma in pure ground-glass nodules. Eur J Radiol. 2021. PMID: 33836337. doi:10.1016/j.ejrad.2021.109683

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。