心力衰竭患者三维左心室整体应变冠状动脉CT血管成像定量分析:与3T心脏磁共振比较
本研究以心脏磁共振为参考,评估冠状动脉CT血管成像特征追踪测量心力衰竭患者左心室整体心肌应变的能力。连续纳入44例不同程度心力衰竭患者,在24小时内完成心电门控CCTA与CMR检查。CCTA衍生的3D-GLS与CMR无显著差异且相关性好(r=0.79),但3D-GRS和3D-GCS与CMR存在统计学差异;2D整体应变两种方法间均有统计学差异但相关性好。
要点
- CCTA衍生的3D-GLS与CMR 3D-GLS无显著差异,Bland-Altman偏倚仅0.3%,可作为可互换的定量指标。
- CCTA 3D-GRS和3D-GCS与CMR相比存在统计学差异,解读这两个参数时需谨慎。
- CCTA 3D整体应变观察者内一致性良好(3D-GLS ICC=0.856,3D-GCS ICC=0.741,3D-GRS ICC=0.762)。
核心结论
- CCTA衍生的3D-GLS与CMR相比可提供可靠且可互换的结果,用于定量评估心力衰竭患者心肌机械力学变化,观察者内一致性良好。
研究设计与样本
- 连续纳入44例不同程度心力衰竭患者,均在24小时内完成心电门控CCTA和CMR检查。
- 以CMR为参考标准,比较两种方法获得的2D/3D左心室整体径向应变、圆周应变、纵向应变及常规功能参数。
- CCTA平均剂量长度乘积(DLP)为387.86 ± 89.3 mGy*cm。
诊断标准与关键数值
- CCTA 3D-GLS与CMR 3D-GLS无显著差异(p > 0.05),Bland-Altman偏倚0.3%。
- CCTA与CMR整体应变相关性:3D-GRS r=0.89、3D-GCS r=0.86、3D-GLS r=0.79(均p < 0.001)。
- CCTA 3D-GRS和3D-GCS与CMR相比有统计学差异;2D整体应变两种方法间均有统计学差异(p<0.05)。
- 2D整体应变相关性:2D-GRS r=0.80、2D-GCS r=0.81、2D-GLS r=0.81(均p < 0.001)。
- CCTA 3D-GLS与CCTA-LVEF呈负相关(r=-0.75,p < 0.05)。
临床应用与阅片要点
- 在心力衰竭患者中,CCTA特征追踪获得的3D-GLS与CMR结果可互换,可用于定量评估心肌机械力学变化。
- CCTA 3D-GRS和3D-GCS与CMR存在统计学差异,报告中引用这两个参数时应注明方法与参考标准的差异。
- CCTA 3D整体应变观察者内一致性良好(3D-GLS ICC=0.856、3D-GCS ICC=0.741、3D-GRS ICC=0.762),支持其重复测量可靠性。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
PURPOSE: The objective of this study was to investigate whether three dimentional (3D)- Coronary CT angiography (CCTA)- feature tracking (FT) can measure global myocardial strain of the left ventricle (LV) in patients with heart failure using cardiac MR (CMR) as reference.
METHODS: Consecutive patients (n = 44) with variable degrees of heart failure who underwent an ECG-gated CCTA and CMR within 24 h were included. Both modalities were compared for 2D/3D LV global radial strain (2D/3D-GRS), circumferential strain (2D/3D-GCS), longitudinal strain (2D/3D-GLS) and conventional functional parameters.
RESULTS: Compared to CMR, CCTA-derived 3D-GLS and LVEF showed no significant difference (p > 0.05). Bland-Altman plots showed a small bias (0.3 %) between CCTA-derived 3D-GLS and CMR 3D-GLS. Close correlations were observed between the two modalities regarding LV global strain (3D-GRS, r = 0.89; 3D-GCS, r = 0.86; 3D-GLS, r = 0.79, respectively, p < 0.001 for all). However, CCTA-derived 3D-GRS and 3D-GCS were statistically different compared with CMR. CCTA-derived 3D-GLS had an inverse correlation with CCTA-LVEF(r=-0.75, p < 0.05). Intraobserver agreements for CCTA-derived 3D-global strain were good (ICC = 0.856 for 3D-GLS, ICC = 0.741 for 3D-GCS and ICC = 0.762 for 3D-GRS). 2D global strain showed statistical differences between the two modalities (p<0.05 for all), but close correlations were observed regarding 2D LV global strain (2D-GRS, r = 0.80; 2D-GCS, r = 0.81; 2D-GLS, r = 0.81, respectively, p < 0.001 for all). The average radiation dose-long-product (DLP) of CCTA was 387.86 ± 89.3 mGy*cm.
CONCLUSION: CCTA-derived 3D-GLS can provide both reliable and interchangeable results for quantitative assessment of myocardial mechanical changes in HF patients compared to CMR with good intra-observer agreement.
引用
- Wang R, Fang Z, Wang H, et al. Quantitative analysis of three-dimensional left ventricular global strain using coronary computed tomography angiography in patients with heart failure: Comparison with 3T cardiac MR. Eur J Radiol. 2020. PMID: 33401113. doi:10.1016/j.ejrad.2020.109485
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。