文献速递骨肌腹部CT

基于彩色脊柱图像的快速CT骨密度筛查方法的前瞻性验证

Prospective validation of a rapid CT-based bone mineral density screening method using colored spinal images.
PubMed 文献 · Abdom Radiol (NY) · 2020-10-12

前瞻性观察研究纳入196例接受筛查乳腺X线摄影的50岁以上无症状女性,行腹部平扫CT,比较灰度视觉评估、椎体平均衰减定量测量与彩色图像视觉评估三种方式鉴别L1/L2骨密度正常与异常的表现。以体模定量CT测量的平均骨密度为参考标准,彩色图像视觉评估准确率92%、平均2.1秒,观察者间一致性ICC为0.90。

要点

  • 彩色脊柱图像视觉评估鉴别L1/L2骨密度正常与异常准确率92%,平均阅片时间2.1秒。
  • 彩色图像视觉评估观察者间一致性ICC为0.90,优于灰度视觉评估ICC 0.31和定量测量ICC 0.73。
  • L1/L2平均衰减与平均骨密度高度相关(r=0.96/0.91,p<0.001)。

核心结论

  • 使用彩色腹部CT图像检测异常骨密度准确率高、速度快,且观察者间一致性极好。

研究设计与样本

  • 前瞻性观察研究,纳入196例50岁及以上接受筛查乳腺X线摄影的无症状女性,行腹部常规平扫CT。
  • CT图像经软件处理生成矢状位彩色图像,绿色椎体骨小梁表示骨密度正常,红色表示骨密度异常(低骨密度或骨质疏松)。
  • 由4名放射科医师分别采用灰度图像视觉评估、椎体平均衰减定量测量和彩色图像视觉评估三种方式评价L1/L2骨密度。
  • 以体模定量CT测量的L1/L2平均骨密度值为参考标准,计算平均准确率和解读时间,采用组内相关系数(ICC)评估观察者间一致性。

关键影像表现/征象

  • 彩色矢状位图像上,绿色椎体骨小梁指示骨密度正常,红色指示骨密度异常(低骨密度或骨质疏松)。

诊断标准与关键数值

  • 鉴别L1/L2骨密度正常与异常的平均准确率和平均评估时间:灰度图像视觉评估为66%和6.0秒,椎体平均衰减定量测量为88%和15.2秒,彩色图像视觉评估为92%和2.1秒(准确率与时间比较的p均<0.001)。
  • 观察者间一致性:灰度图像视觉评估ICC为0.31(差),椎体平均衰减定量测量ICC为0.73(好),彩色图像视觉评估ICC为0.90(极好)。
  • L1/L2平均衰减与平均骨密度高度相关(r=0.96/0.91,p均<0.001)。

临床应用与阅片要点

  • 在腹部平扫CT矢状位彩色图像上,可通过绿色与红色骨小梁的视觉判断快速鉴别L1/L2骨密度正常与异常。
  • 彩色图像视觉评估较灰度图像视觉评估和定量测量准确率更高、阅片时间更短,且观察者间一致性达到极好。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

PURPOSE: To prospectively validate a method to accurately and rapidly differentiate normal from abnormal spinal bone mineral density (BMD) using colored abdominal CT images.

METHODS: For this prospective observational study, 196 asymptomatic women ≥ 50 years of age presenting for screening mammograms underwent routine nonenhanced CT imaging of the abdomen. The CT images were processed with software designed to generate sagittal colored images with green vertebral trabecular bone indicating normal BMD and red indicating abnormal BMD (low BMD or osteoporosis). Four radiologists evaluated L1/L2 BMD on sagittal images using visual assessment of grayscale images, quantitative measurements of mean vertebral attenuation, and visual assessment of colored images. Mean BMD values at L1/L2 using quantitative CT with a phantom served as the reference standard. The average accuracy and time of interpretation were calculated. Inter-observer agreement was assessed using intraclass correlation coefficient (ICC).

RESULTS: Mean attenuation at L1/L2 was highly correlated with mean BMD (r = 0.96/0.91, p < 0.001 for both). The average accuracy and mean time to assess BMD among four readers for differentiating normal from abnormal BMD was 66% and 6.0 s using visual assessment of grayscale images, 88% and 15.2 s using quantitative measurements of mean vertebral attenuation, and 92% and 2.1 s using visual assessment of colored images (p < 0.001 and p < 0.001, respectively). Inter-observer agreement was poor using visual assessment of grayscale images (ICC:0.31), good using quantitative measurements of mean vertebral attenuation (ICC:0.73), and excellent using visual assessment of colored images (ICC:0.90).

CONCLUSION: Detection of abnormal BMD using colored abdominal CT images was highly accurate, rapid, and had excellent inter-observer agreement.

来源:Abdom Radiol (NY),查看原文。版权归原作者所有。

引用

  1. Varney E, Abou Elkassem A, Khan M, et al. Prospective validation of a rapid CT-based bone mineral density screening method using colored spinal images. Abdom Radiol (NY). 2020. PMID: 33044652. doi:10.1007/s00261-020-02791-1

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。