多能CT更新:物理学、原理与应用
多能CT通过两种或以上能谱的CT采集,利用组织与材料在不同X线能量下的衰减差异,实现常规CT难以做到的组织与材料区分。本文综述了源级与探测器级多能CT技术、投影域与图像域后处理及双材料/多材料分解,并介绍了虚拟单能图像、碘图、虚拟平扫和尿酸图的主要应用。
要点
- 低能虚拟单能图像用于增强对比信号、提高病灶可见性,高能虚拟单能图像用于减轻部分伪影。
- 碘图用于评估灌注、病灶定性及疗效评估,虚拟平扫可省去多期扫描中的真实平扫以降低辐射剂量。
- 尿酸图用于肾结石与痛风的定性,光子计数探测器CT可实现两个以上能量仓的多能CT。
核心结论
- 多能CT利用组织与材料在不同X线能量下衰减的差异,实现超越常规CT的组织与材料区分。
- 低能虚拟单能图像增强对比信号与病灶可见性,高能虚拟单能图像减轻部分伪影。
- 碘图用于评估灌注、病灶定性与疗效评估,虚拟平扫用于病灶定性并通过省去真实平扫降低辐射剂量。
- 尿酸图用于肾结石与痛风的定性。
研究设计与样本
- 本文为综述,介绍多能CT的物理学原理、技术类型与临床应用。
- 多能CT技术可在源级或探测器级实现,最常用的是双源、快速管电压切换和双层探测器CT。
- 目前多数可用技术通常使用两个能量水平,即双能CT;使用两个以上能量仓的光子计数探测器CT可实现超越当前双能CT的多能CT。
- 后处理可在投影域或图像域进行,采用双材料或多材料分解。
诊断标准与关键数值
- 最常用的多能CT图像包括虚拟单能图像、碘图、虚拟平扫图像和尿酸图像。
- 低能虚拟单能图像用于增强对比信号、提高病灶可见性。
- 高能虚拟单能图像用于减轻部分伪影。
- 碘图用于评估灌注、病灶定性和评估治疗反应。
- 虚拟平扫图像用于病灶定性,并通过在多期采集中省去真实平扫来节省辐射剂量。
临床应用与阅片要点
- 阅片时可利用低能虚拟单能图像提高病灶对比与可见性,利用高能虚拟单能图像减轻部分伪影。
- 可结合碘图评估灌注、进行病灶定性并评估治疗反应。
- 可利用虚拟平扫图像进行病灶定性,并在多期采集中省去真实平扫以降低辐射剂量。
- 可利用尿酸图像对肾结石和痛风进行定性。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
Multienergy CT involves acquisition of two or more CT measurements with distinct energy spectra. Using the differential attenuation of tissues and materials at different x-ray energies, multienergy CT allows distinction of tissues and materials beyond that possible with conventional CT. Multienergy CT technologies can operate at the source or detector level. Dual-source, rapid tube-voltage switching, and dual-layer detector CT are the most commonly used multienergy CT technologies. Most of the currently available technologies typically use two energy levels, commonly referred to as dual-energy CT. With use of two or more energy bins, photon-counting detector CT can perform multienergy CT beyond current dual-energy CT technologies. Multienergy CT postprocessing can be performed in the projection or image domain using two-material or multimaterial decomposition. The most commonly used multienergy CT images are virtual monoenergetic images (VMIs), iodine maps, virtual noncontrast (VNC) images, and uric acid images. Low-energy VMIs are used to boost contrast signal and enhance lesion conspicuity. High-energy VMIs are used to decrease some artifacts. Iodine maps are used to evaluate perfusion, characterize lesions, and evaluate response to therapy. VNC images are used to characterize lesions and save radiation dose by eliminating true noncontrast images from multiphasic acquisitions. Uric acid images are used for characterization of renal calculi and gout. Online supplemental material is available for this article. ©RSNA, 2020.
引用
- Rajiah P, Parakh A, Kay F, et al. Update on Multienergy CT: Physics, Principles, and Applications. Radiographics. 2020. PMID: 32822281. doi:10.1148/rg.2020200038
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。