PI-RADS 2.0与2.1版本在基于MRI计算前列腺体积中的比较
回顾性分析95例未治疗患者的前列腺MRI,比较PI-RADS v2.0和v2.1线性测量法计算前列腺体积与手动逐层分割参考标准的一致性。椭球公式在v2.0下与参考标准无显著差异(中位差0.4 mL,p=0.393),v2.1下有显著差异(中位差2.6 mL,p<0.001);子弹公式系统性高估体积。读者间一致性均优秀。
要点
- 椭球公式在PI-RADS v2.0下与参考标准无显著差异(中位差0.4 mL,p=0.393),v2.1下有显著差异(中位差2.6 mL,p<0.001)。
- 子弹公式系统性高估前列腺体积(v2.0中位差13.3 mL,v2.1中位差16.0 mL,均p<0.001),不应使用。
- 移行带增大时椭球公式倾向于高估体积(v2.0中位差4.7 mL,p=0.018;v2.1中位差5.7 mL,p<0.001)。
关键影像表现/征象
- 椭球公式v2.0中位差0.4 mL(四分位距-3.9至5.1 mL,p=0.393),v2.1中位差2.6 mL(四分位距-1.6至7.3 mL,p<0.001),两版本中位差2.2 mL。
- 子弹公式高估体积:v2.0中位差13.3 mL(p<0.001),v2.1中位差16.0 mL(p<0.001)。
- 移行带增大时椭球公式计算体积倾向于高于参考标准:v2.0中位差4.7 mL(p=0.018),v2.1中位差5.7 mL(p<0.001)。
诊断标准与关键数值
- 椭球公式读者间一致性ICC:v2.0为0.985,v2.1为0.990。
- 子弹公式读者间一致性ICC:v2.0为0.987,v2.1为0.994。
临床应用与阅片要点
- 基于本研究发现,前列腺MRI体积计算应使用椭球公式而非子弹公式,后者系统性高估体积。
- 作者指出PI-RADS v2.0与v2.1椭球公式的差异虽绝对值小,但在前列腺特异性抗原密度计算等特定临床场景中可能有意义。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
RATIONALE AND OBJECTIVES: Prostate gland volume (PGV) should be routinely included in MRI reports of the prostate. The recently updated Prostate Imaging Reporting and Data System (PI-RADS) version 2.1 includes a change in the recommended measurement method for PGV compared to version 2.0. The purpose of this study was to evaluate the agreement of MRI-based PGV calculations with the volumetric manual slice-by-slice prostate segmentation as a reference standard using the linear measurements per PI-RADS versions 2.0 and 2.1. Furthermore, to assess inter-reader agreement for the different measurement approaches, determine the influence of an enlarged transition zone on measurement accuracy and to assess the value of the bullet formula for PGV calculation.
MATERIALS AND METHODS: Ninety-five consecutive treatment-naive patients undergoing prostate MRI were retrospectively analyzed. Prostates were manually contoured and segmented on axial T2-weighted images. Four different radiologists independently measured the prostate in three dimensions according to PI-RADS v2.0 and v2.1, respectively. MRI-based PGV was calculated using the ellipsoid and bullet formulas. Calculated volumes were compared to the reference manual segmentations using Wilcoxon signed-rank test. Inter-reader agreement was calculated using intraclass correlation coefficient (ICC).
RESULTS: Inter-reader agreement was excellent for the ellipsoid and bullet formulas using PI-RADS v2.0 (ICC 0.985 and 0.987) and v2.1 (ICC 0.990 and 0.994), respectively. The median difference from the reference standard using the ellipsoid formula derived PGV was 0.4 mL (interquartile range, -3.9 to 5.1 mL) for PI-RADS v2.0 (p = 0.393) and 2.6 mL (interquartile range, -1.6 to 7.3 mL) for v2.1 (p < 0.001) with a median difference of 2.2 mL. The bullet formula overestimated PGV by a median of 13.3 mL using PI-RADS v2.0 (p < 0.001) and 16.0 mL using v2.1 (p < 0.001). In the presence of an enlarged transition zone the PGV tended to be higher than the reference standard for PI-RADS v2.0 (median difference of 4.7 mL; p = 0.018) and for v2.1 (median difference of 5.7 mL, p < 0.001) using the ellipsoid formula.
CONCLUSION: Inter-reader agreement was excellent for the calculated PGV for both methods. PI-RADS v2.0 measurements with the ellipsoid formula yielded the most accurate volume estimates. The differences between PI-RADS v2.0 and v2.1 were statistically significant although small in absolute numbers but may be of relevance in specific clinical scenarios like prostate-specific antigen density calculation. These findings validate the use of the ellipsoid formula and highlight that the bullet formula should not be used for prostate volume estimation due to systematic overestimation.
引用
- Ghafoor S, Becker AS, Woo S, et al. Comparison of PI-RADS Versions 2.0 and 2.1 for MRI-based Calculation of the Prostate Volume. Acad Radiol. 2020. PMID: 32814644. doi:10.1016/j.acra.2020.07.027
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。