文献速递腹部MR

肝脏MR弹性成像技术与图像解读:要点与陷阱

Liver MR Elastography Technique and Image Interpretation: Pearls and Pitfalls.
PubMed 文献 · Radiographics · 2019-10-18

本文综述肝脏MR弹性成像的三个核心环节:优化成像技术(患者禁食、被动驱动器放置、断面定位、呼气末采集、序列时机与脉冲序列参数)、图像质控(检查后立即复核弹性图并在诊断部分结束前必要时重复)以及弹性图解读与报告(测量区域选择、除纤维化或肝硬化外可增加肝脏硬度的其他情况、结果报告方式),旨在帮助实施和运行临床肝脏MR弹性成像服务。

要点

  • 肝脏硬度测量(LSM)有助于预测肝纤维化分期,但须以优化技术、即时质控和规范解读为前提。
  • 检查后应立即复核弹性图是否达到诊断质量,必要时在诊断部分结束前重复MR弹性成像。
  • 解读时需明确肝脏哪些区域应纳入或避开测量,并了解除纤维化或肝硬化外可增加肝脏硬度的其他情况。

核心结论

  • 肝脏MR弹性成像用于评估可能的纤维化或肝硬化时测量肝脏硬度,肝脏硬度测量有助于预测肝纤维化分期。
  • 要获得准确可靠的肝脏硬度测量,需理解并落实三个核心环节:优化成像技术、即时图像质控、正确解读与报告弹性图。
  • 本文综述了肝脏MR弹性成像的正确操作技术、后续质控评估以及解读与报告原则,可能有助于实施和运行临床肝脏MR弹性成像服务。

研究设计与样本

  • 本文为综述,总结肝脏MR弹性成像的操作技术、质控评估以及解读与报告原则。

关键影像表现/征象

  • 弹性图应在检查完成后立即复核,以确认是否达到诊断质量,从而在需要时采取纠正步骤并在诊断部分结束前重复MR弹性成像。
  • 解读肝脏硬度测量时需确定肝脏哪些区域纳入或避开测量。

诊断标准与关键数值

  • 行MR弹性成像时应优化六项重要技术参数:检查前患者禁食、正确放置被动驱动器、将MR弹性成像断面置于肝脏最大面积处、在呼气末使用MR弹性成像相关序列、选择MR弹性成像序列的最佳时机、优化若干关键脉冲序列参数。
  • 解读医师需掌握肝脏硬度测量的正确技术,包括确定测量时纳入或避开的肝脏区域、了解除纤维化或肝硬化外可增加肝脏硬度的其他情况以及如何报告弹性成像结果。

临床应用与阅片要点

  • 检查后立即复核弹性图以确保诊断质量,必要时在诊断部分结束前重复MR弹性成像。
  • 测量肝脏硬度时按正确技术选择纳入或避开的肝脏区域,并了解除纤维化或肝硬化外可增加肝脏硬度的其他情况。
  • 按本文原则解读并报告弹性成像结果,以支持临床肝脏MR弹性成像服务的实施与运行。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

Liver MR elastography is an imaging technique used to measure liver stiffness in the evaluation for possible fibrosis or cirrhosis. Liver stiffness measurement (LSM) is useful for predicting the stage of liver fibrosis. However, obtaining and reporting accurate and reliable LSMs with MR elastography require an understanding of the three core components of liver MR elastography: optimization of imaging technique, prompt quality control of images, and proper interpretation and reporting of elastogram findings. When performing MR elastography, six important technical parameters that should be optimized are patient fasting before the examination, proper passive driver placement, proper MR elastography section positioning over the largest area of the liver, use of MR elastography-related sequences at end expiration, choosing the best timing of the MR elastography sequence, and optimization of several essential pulse sequence parameters. As soon as the MR elastography examination is performed, the elastograms should be reviewed to ensure that they are of diagnostic quality so that corrective steps can be taken, if needed, and MR elastography can be repeated before the diagnostic portion of the examination concludes. Finally, the interpreting radiologist needs to understand and be able to perform the proper technique for LSMs, including determining which areas of the liver to include or avoid in the measurements; knowing which conditions, other than fibrosis or cirrhosis, can increase liver stiffness; and understanding how to report elastography results. This article reviews the proper technique for performing liver MR elastography and subsequent quality control assessment, as well as the principles for interpreting and reporting studies. This review may be helpful for implementing and operating a clinical liver MR elastography service.Online supplemental material is available for this article.©RSNA, 2019.

来源:Radiographics,查看原文。版权归原作者所有。

引用

  1. Guglielmo FF, Venkatesh SK, Mitchell DG, et al. Liver MR Elastography Technique and Image Interpretation: Pearls and Pitfalls. Radiographics. 2019. PMID: 31626569. doi:10.1148/rg.2019190034

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。