以工作流程为中心的开源全自动胸部CT肺容积测量
研究开发了一种基于区域生长法、无需人工交互的开源算法,从胸部CT全自动提取肺总容量(TLC),回顾性分析288例患者,13例(4.5%)分割结果不佳;验证亚组中CT肺容积与肺功能测得的TLC相关系数r=0.87(p<0.001),不同重建核之间ICC为0.99,平均计算时间5秒,算法已成功整合进PACS环境。
要点
- 开源算法可全自动从胸部CT计算肺容积,无需放射科医生额外输入,平均耗时5秒(标准差3.72秒)。
- 回顾性分析288例患者中,人工复核发现13例(4.5%)分割结果不佳,即超过95%的病例分割优良。
- 验证亚组中CT肺容积与肺功能TLC相关系数r=0.87(p<0.001),不同重建核之间ICC为0.99。
核心结论
- 所开发的算法可快速、全自动计算肺容积,无需放射科医生任何额外输入,在超过95%的病例中提供优良分割,且CT肺容积与肺功能TLC显著正相关。
研究设计与样本
- 回顾性分析288例患者,开发基于区域生长法的开源全自动算法,评估不同重建核计算的肺容积(TLCCT),并与3天内肺功能测得的TLC(TLCPFT)在可用亚组中进行相关性验证。
关键影像表现/征象
- 算法全自动分割肺组织并计算肺总容量(TLCCT),无需手动交互。
- 不同重建核计算的肺容积之间一致性极好,ICC为0.99。
- 人工复核发现13例(4.5%)患者分割结果不佳。
诊断标准与关键数值
- 验证亚组中TLCCT与TLCPFT的相关系数r=0.87(p<0.001)。
- 不同重建核之间TLCCT的组内相关系数ICC=0.99。
- 算法平均计算时间为5秒(标准差3.72秒)。
临床应用与阅片要点
- 算法整合入PACS环境成功,可将包含测量值和分割叠加图的DICOM封装PDF发送至PACS,供放射科医生识别错误测量。
- 放射科医生可通过PACS中的分割叠加图人工复核,发现并纠正自动分割错误。
局限性
- 回顾性分析288例患者。
- 仅在3天内有肺功能检查结果的亚组患者中进行了验证。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
AIM: To develop a robust open-source method for fully automated extraction of total lung capacity (TLC) from computed tomography (CT) images and to demonstrate its integration into the clinical workflow.
MATERIALS AND METHODS: Using only open-source software, an algorithm was developed based on a region-growing method that does not require manual interaction. Lung volumes calculated from reconstructions with different kernels (TLCCT) were assessed. To validate the algorithm calculations, the results were correlated to TLC measured by pulmonary function testing (TLCPFT) in a subgroup of patients for which this information was available within 3 days of the CT examination.
RESULTS: A total of 288 patients were analysed retrospectively. Manual review revealed poor segmentation results in 13 (4.5%) patients. In the validation subgroup, the correlation between TLCCT and TLCPFT was r=0.87 (p<0.001). Measurements showed excellent agreement between the two reconstruction kernels with an intraclass correlation coefficient (ICC) of 0.99. Calculation of the volumes took an average of 5 seconds (standard deviation: 3.72 seconds). Integration of the algorithm into the departments of the PACS environment was successful. A DICOM-encapsulated PDF document with measurements and an overlay of the segmentation results was sent to the PACS to allow the radiologists to detect false measurements.
CONCLUSIONS: The algorithm developed allows fast and fully automated calculation of lung volume without any additional input from the radiologist. The algorithm delivers excellent segmentation in >95% of cases with significant positive correlations between lung volume on CT and TLC on PFT.
引用
- Jungmann F, Brodehl S, Buhl R, et al. Workflow-centred open-source fully automated lung volumetry in chest CT. Clin Radiol. 2019. PMID: 31587801. doi:10.1016/j.crad.2019.08.010
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。