文献速递胸部CT

临床肺癌分期CT评估:多平面重建测量比轴位测量更能反映病理T分期吗?

CT Evaluation for Clinical Lung Cancer Staging: Do Multiplanar Measurements Better Reflect Pathologic T-Stage than Axial Measurements?
PubMed 文献 · Korean J Radiol · 2019-01-01

该回顾性研究从1661例手术切除的原发性肺癌患者中随机选取210例(每个病理T分期各30例),由两名阅片者独立在MPR CT上测量最大径,并用三维容积分割获取三维最长径。MPR测量判断T分期的准确率显著高于单纯轴位测量(阅片者1为74.3%对63.8%,p=0.001;阅片者2为68.1%对61.9%,p=0.049),亚组分析中仅T1c及以上组差异有统计学意义;三维最长径的准确率为54.8%(115/210),显著低于MPR。结论认为MPR CT测径能更好地反映病理T分期,尤其对T1c及以上期别,而三维平面测量未见附加价值。

要点

  • MPR CT测径判断T分期的准确率高于单纯轴位测径(阅片者1为74.3%对63.8%,p=0.001;阅片者2为68.1%对61.9%,p=0.049)。
  • 亚组分析中,MPR直径的准确率仅在T1c及以上组显著高于轴位直径(p<0.05)。
  • 三维最长径准确率为54.8%(115/210),显著低于MPR(p<0.05)。

核心结论

  • MPR CT上的肿瘤大小测量比轴位测量更好地反映病理T分期,尤其在T1c或更高期别的肺癌中。
  • 三维平面测量未显示附加价值,其准确率显著低于MPR测量。

研究设计与样本

  • 回顾性研究,从2013年6月至2016年11月间因原发性肺癌接受手术切除的1661例患者中随机选取210例(男145例;平均年龄64.4岁),每个病理T分期各分配30例。
  • 两名阅片者独立在MPR CT图像上测量病灶最大径,并使用容积分割获取三维最长径;以病理T分期为参考标准进行比较。
  • 采用McNemar检验比较准确率差异,采用组内相关系数(ICC)评价阅片者间一致性;亚组分析分为Group 1(T1a/b)和Group 2(T1c或更高)。

诊断标准与关键数值

  • MPR测量判断T分期的诊断准确率:阅片者1为74.3%(156/210),阅片者2为68.1%(143/210)。
  • 轴位测量判断T分期的诊断准确率:阅片者1为63.8%(134/210),阅片者2为61.9%(130/210)。
  • 三维最长径判断T分期的准确率为54.8%(115/210),显著低于MPR(p<0.05)。
  • 轴位与MPR测量的阅片者间ICC均为0.98。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

OBJECTIVE: To retrospectively investigate whether tumor size assessment on multiplanar reconstruction (MPR) CT images better reflects pathologic T-stage than evaluation on axial images and evaluate the additional value of measurement in three-dimensional (3D) space.

MATERIALS AND METHODS: From 1661 patients who had undergone surgical resection for primary lung cancer between June 2013 and November 2016, 210 patients (145 men; mean age, 64.4 years) were randomly selected and 30 were assigned to each pathologic T-stage. Two readers independently measured the maximal lesion diameters on MPR CT. The longest diameters on 3D were obtained using volume segmentation. T-stages determined on CT images were compared with pathologic T-stages (overall and subgroup-Group 1, T1a/b; Group 2, T1c or higher), with differences in accuracy evaluated using McNemar's test. Agreement between readers was evaluated with intraclass correlation coefficients (ICC).

RESULTS: The diagnostic accuracy of MPR measurements for determining T-stage was significantly higher than that of axial measurement alone for both reader 1 (74.3% [156/210] vs. 63.8% [134/210]; p = 0.001) and reader 2 (68.1% [143/210] vs. 61.9% [130/210]; p = 0.049). In the subgroup analysis, diagnostic accuracy with MPR diameter was significantly higher than that with axial diameter in only Group 2 (p < 0.05). Inter-reader agreements for the ICCs on axial and MPR measurements were 0.98 and 0.98. The longest diameter on 3D images showed a significantly lower performance than MPR, with an accuracy of 54.8% (115/210) (p < 0.05).

CONCLUSION: Size measurement on MPR CT better reflected the pathological T-stage, specifically for T1c or higher stage lung cancer. Measurements in a 3D plane showed no added value.

来源:Korean J Radiol,查看原文。版权归原作者所有。

引用

  1. Park S, Lee SM, Choe J, et al. CT Evaluation for Clinical Lung Cancer Staging: Do Multiplanar Measurements Better Reflect Pathologic T-Stage than Axial Measurements? Korean J Radiol. 2019. PMID: 31270984. doi:10.3348/kjr.2018.0824

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。