文献速递腹部技术与安全US

利用定量超声在活体兔中表征脂肪肝

Characterizing Fatty Liver in vivo in Rabbits, Using Quantitative Ultrasound.
PubMed 文献 · Ultrasound Med Biol · 2019-05-08

研究在高脂饮食诱导的兔脂肪肝模型中,用阵列换能器(L9-4,中心频率4.5 MHz)采集活体射频背向散射数据,评估衰减系数和背向散射系数(BSC)定量肝脂肪变的能力。衰减系数的斜率与中频段拟合在低脂与高脂组间差异有统计学意义。基于BSC的无模型和有模型参数化及衰减系数参数的分类准确率分别为84.11%、82.93%和78.91%。

要点

  • 衰减系数的斜率(p=0.00014)和中频段拟合(p=0.007)可区分低脂与高脂肝。
  • BSC主成分分析前2个主成分捕获变换数据96%的方差,用于支持向量机分类。
  • 基于BSC的无模型参数化分类准确率84.11%,有模型参数化82.93%。

核心结论

  • 在兔脂肪肝模型中,衰减和BSC分析可区分低脂肝与高脂肝。

研究设计与样本

  • 动物实验(兔脂肪肝模型),高脂饮食维持0、1、2、3或6周,每组3只兔,共15只;使用L9-4阵列换能器(中心频率4.5 MHz)连接SonixOne扫描仪采集活体射频背向散射数据;参考标准为肝脂质水平(低脂类≤9%,高脂类>9%)。

诊断标准与关键数值

  • 低脂类为肝脂质水平≤9%,高脂类为>9%;衰减系数斜率区分两类p=0.00014,中频段拟合p=0.007(两样本t检验);基于BSC的无模型参数化、有模型参数化和衰减系数参数的分类准确率分别为84.11%、82.93%和78.91%。

临床应用与阅片要点

  • 作者认为衰减和BSC分析可在兔脂肪肝模型中区分低脂肝与高脂肝。

局限性

  • 原文未报告局限性

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

Nonalcoholic fatty liver disease (NAFLD) is the most common cause of chronic liver disease and can often lead to fibrosis, cirrhosis, cancer and complete liver failure. Liver biopsy is the current standard of care to quantify hepatic steatosis, but it comes with increased patient risk and only samples a small portion of the liver. Imaging approaches to assess NAFLD include proton density fat fraction estimated via magnetic resonance imaging (MRI) and shear wave elastography. However, MRI is expensive and shear wave elastography is not proven to be sensitive to fat content of the liver (Kramer et al. 2016). On the other hand, ultrasonic attenuation and the backscatter coefficient (BSC) have been observed to be sensitive to levels of fat in the liver (Lin et al. 2015; Paige et al. 2017). In this study, we assessed the use of attenuation and the BSC to quantify hepatic steatosis in vivo in a rabbit model of fatty liver. Rabbits were maintained on a high-fat diet for 0, 1, 2, 3 or 6 wk, with 3 rabbits per diet group (total N = 15). An array transducer (L9-4) with a center frequency of 4.5 MHz connected to a SonixOne scanner was used to gather radio frequency (RF) backscattered data in vivo from rabbits. The RF signals were used to estimate an average attenuation and BSC for each rabbit. Two approaches were used to parameterize the BSC (i.e., the effective scatterer diameter and effective acoustic concentration using a spherical Gaussian model and a model-free approach using a principal component analysis [PCA]). The 2 major components of the PCA from the BSCs, which captured 96% of the variance of the transformed data, were used to generate input features to a support vector machine for classification. Rabbits were separated into two liver fat-level classes, such that approximately half of the rabbits were in the low-lipid class (≤9% lipid liver level) and half of the rabbits in the high-lipid class (>9% lipid liver level). The slope and the midband fit of the attenuation coefficient provided statistically significant differences (p value = 0.00014 and p value = 0.007, using a two-sample t test) between low and high-lipid fat classes. The proposed model-free and model-based parameterization of the BSC and attenuation coefficient parameters yielded classification accuracies of 84.11 %, 82.93 % and 78.91 % for differentiating low-lipid versus high-lipid classes, respectively. The results suggest that attenuation and BSC analysis can differentiate low-fat versus high-fat livers in a rabbit model of fatty liver disease.

来源:Ultrasound Med Biol,查看原文。版权归原作者所有。

引用

  1. Nguyen TN, Podkowa AS, Tam AY, et al. Characterizing Fatty Liver in vivo in Rabbits, Using Quantitative Ultrasound. Ultrasound Med Biol. 2019. PMID: 31076231. doi:10.1016/j.ultrasmedbio.2019.03.021

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。