文献速递胸部技术与安全USCT

肺超声表面波弹性成像在间质性肺疾病分期中的应用

Lung US Surface Wave Elastography in Interstitial Lung Disease Staging.
PubMed 文献 · Radiology · 2019-03-05

这项前瞻性研究纳入91例间质性肺疾病患者和30名健康者,用肺超声表面波弹性成像通过胸壁机械激励测量肺表面波速度,并按肺功能、高分辨率CT和临床评估将病变分为F0至F3级。结果显示该技术区分健康者与任何级别间质性肺疾病的敏感度为92%、特异度为89%,作者认为其可能作为高分辨率CT的辅助手段用于无创评估。

要点

  • 肺超声表面波弹性成像通过胸壁机械激励测量肺表面波速度,用于无创评估肺表面硬度或纤维化。
  • 区分健康者(F0)与任何级别间质性肺疾病(F1-F3)的敏感度为92%、特异度为89%。
  • 区分F0-F2与F3的敏感度为50%、特异度为81%;区分F0与F1的敏感度为88%、特异度为97%。

核心结论

  • 肺超声表面波弹性成像可能作为高分辨率CT的辅助手段,用于间质性肺疾病的у无创评估。

研究设计与样本

  • 前瞻性研究,纳入91例间质性肺疾病患者(女性51例、男性40例,平均年龄62.4岁±12.9)和30名健康者(女性16例、男性14例,平均年龄45.4岁±14.6),时间为2016年2月至2017年5月。

关键影像表现/征象

  • 通过轻柔机械激励胸壁在肺内传播表面波,并用超声探头测量肺表面波速度。
  • 间质性肺疾病严重程度依据肺功能检查、高分辨率CT和临床评估分为无(健康肺F0)、轻度(F1)、中度(F2)或重度(F3)。

诊断标准与关键数值

  • 区分健康者(F0)与任何级别间质性肺疾病(F1-F3):敏感度92%(95%CI:84%,96%;P < .001),特异度89%(95%CI:81%,94%;P < .001)。
  • 区分间质性肺疾病F0-F2与F3:敏感度50%,特异度81%。
  • 区分F0与F1:敏感度88%,特异度97%。
  • 受试者工作特征曲线下面积最高值在200 Hz处获得,区分健康者与任何间质性肺疾病参与者的范围为0.83至0.94。

临床应用与阅片要点

  • 作者认为肺超声表面波弹性成像可能作为高分辨率CT的辅助手段用于间质性肺疾病的无创评估。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

Background Lung US surface wave elastography (SWE) can noninvasively quantify lung surface stiffness or fibrosis by evaluating the rate of surface wave propagation. Purpose To assess the utility of lung US SWE for evaluation of interstitial lung disease. Materials and Methods In this prospective study, lung US SWE was used to assess 91 participants (women, 51; men, 40; mean age ± standard deviation [SD], 62.4 years ± 12.9) with interstitial lung disease and 30 healthy subjects (women, 16; men, 14; mean age, 45.4 years ± 14.6) from February 2016 through May 2017. Severity of interstitial lung disease was graded as none (healthy lung [F0]), mild (F1), moderate (F2), or severe (F3) based on pulmonary function tests, high-resolution CT, and clinical assessments. We propagated surface waves on the lung through gentle mechanical excitation of the external chest wall and measured the lung surface wave speed with a US probe. Lung US SWE performance was assessed, and the optimal cutoff wave speed values for fibrosis grades F0 through F3 were determined with receiver operating characteristic (ROC) curve analysis. Results Lung US SWE had a sensitivity of 92% (95% confidence intervals [CI]: 84%, 96%; P < .001) and a specificity of 89% (95% CI: 81%, 94%; P < .001) for differentiating between healthy subjects (F0) and participants with any grade of interstitial lung disease (F1-F3). It had a sensitivity of 50% and a specificity of 81% for differentiating interstitial lung disease grades F0-F2 from F3. The sensitivity was 88% and the specificity was 97% for differentiating between F0 and F1. The highest area under the ROC curve (AUC) values were obtained at 200 Hz and ranged from 0.83 to 0.94 to distinguish between healthy subjects and study participants with any interstitial lung disease. Conclusion Lung US surface wave elastography may be adjunct to high-resolution CT for noninvasive evaluation of interstitial lung disease. © RSNA, 2019 Online supplemental material is available for this article. See also the editorial by Verschakelen in this issue.

来源:Radiology,查看原文。版权归原作者所有。

引用

  1. Zhou B, Bartholmai BJ, Kalra S, et al. Lung US Surface Wave Elastography in Interstitial Lung Disease Staging. Radiology. 2019. PMID: 30835191. doi:10.1148/radiol.2019181729

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。