文献速递乳腺乳腺X线

数字乳腺断层合成:物理原理、伪影与质量控制考量

Digital Breast Tomosynthesis: Physics, Artifacts, and Quality Control Considerations.
PubMed 文献 · Radiographics · 2019-02-15

本文阐述数字乳腺断层合成(DBT)的采集参数原理,包括管球运动、扫描角度和投影数量对分辨率的影响,以及DBT特有伪影的识别与质量控制要求。DBT被视为新成像模式,乳腺成像机构需在FFDM认证外单独获得DBT认证,所有人员须完成初始培训和继续教育学分。

要点

  • 扫描角度越宽,面外(z轴)分辨率越高,利于显示肿块和结构扭曲。
  • 投影数量越多,面内(x-y轴)分辨率越高,利于显示微钙化。
  • 连续管球运动或X线发射缩短成像时间,但较步进-曝光技术导致焦点模糊。

核心结论

  • DBT广泛使用要求放射科医生理解其图像采集、伪影和质量控制的基本原理,以维持最佳图像质量和ALARA辐射剂量。

研究设计与样本

  • 本文为综述,阐述DBT的图像采集参数、伪影和质量控制要求,未报告检索范围与纳入文献。

关键影像表现/征象

  • DBT相关伪影包括模糊-波纹、截断以及皮肤和浅表组织分辨率丢失。
  • 运动伪影因固有的面外模糊而难以识别。

诊断标准与关键数值

  • 全视野数字乳腺摄影(FFDM)和DBT共有的标准采集参数为X线管电压、电流曝光时间和阳极靶与滤过组合的组合。
  • DBT特有的图像采集参数包括管球运动、扫描角度和投影数量。

临床应用与阅片要点

  • DBT被视为新成像模式,乳腺成像机构需在FFDM认证之外单独获得认证。
  • 所有人员(放射科医生、技师和医学物理师)须完成初始DBT培训并维持适当的继续医学教育学分。
  • 需定期执行质量控制以维持最佳图像质量和ALARA辐射剂量。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

As digital breast tomosynthesis (DBT) becomes widely used, radiologists must understand the basic principles of (a) image acquisition, (b) artifacts, and (c) quality control (QC) that are specific to DBT. Standard acquisition parameters common to both full-field digital mammography (FFDM) and DBT are combinations of x-ray tube voltage, current exposure time, and anode target and filter combinations. Image acquisition parameters specific to DBT include tube motion, sweep angle, and number of projections. Continuous tube motion or x-ray emission decreases imaging time but leads to focal spot blurring when compared with step-and-shoot techniques. The sweep angle and number of projections determines resolution. Wider sweep angles allow greater out-of-plane (z-axis) resolution, improving visualization of masses and architecture distortion. A greater number of projections increases in-plane or x-y axis resolution, improving visualization of microcalcifications. Artifacts related to DBT include blurring-ripple, truncation, and loss of skin and superficial tissue resolution. Motion artifacts are difficult to recognize because of inherent out-of-plane blurring. To maintain optimal image quality and an "as low as reasonably achievable" (ALARA) radiation dose, regular QC must be performed. DBT is considered a new imaging modality; therefore, breast imaging facilities are required to obtain a separate certification in addition to that in FFDM, and all personnel (radiologists, technologists, and medical physicists) are mandated to complete initial DBT training and maintain appropriate continuing medical education credits. ©RSNA, 2019.

来源:Radiographics,查看原文。版权归原作者所有。

引用

  1. Tirada N, Li G, Dreizin D, et al. Digital Breast Tomosynthesis: Physics, Artifacts, and Quality Control Considerations. Radiographics. 2019. PMID: 30768362. doi:10.1148/rg.2019180046

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。