文献速递心血管MR

自动像素级定量心肌灌注映射CMR检测阻塞性冠状动脉疾病与冠状动脉微血管功能障碍:与有创冠状动脉生理学对照验证

Automated Pixel-Wise Quantitative Myocardial Perfusion Mapping by CMR to Detect Obstructive Coronary Artery Disease and Coronary Microvascular Dysfunction: Validation Against Invasive Coronary Physiology.
PubMed 文献 · JACC Cardiovasc Imaging · 2019-02-13

本研究在50例稳定型心绞痛患者和15名健康志愿者中评估自动像素级CMR心肌灌注映射,以FFR≤0.80定义阻塞性CAD、IMR≥25定义MVD,发现负荷MBF≤1.94 ml/g/min可准确检测区域性阻塞性CAD(AUC 0.90),整体负荷MBF<1.82 ml/g/min可区分阻塞性三支病变与MVD(AUC 0.94)。

要点

  • 负荷MBF≤1.94 ml/g/min检测区域性阻塞性CAD的AUC为0.90(p<0.001)。
  • 无区域性灌注缺损时,整体负荷MBF<1.82 ml/g/min区分阻塞性三支病变与MVD的AUC为0.94。
  • FFR阳性区域负荷MBF和MPR均低于MVD区域和正常区域。

核心结论

  • 新型自动像素级灌注映射技术可检测FFR定义的生理显著性CAD、IMR定义的MVD,并能区分MVD与多支冠状动脉病变;基于CMR灌注映射的诊断算法用于检测心外膜病变和MVD需进一步临床验证。

研究设计与样本

  • 研究纳入50例稳定型心绞痛患者和15名健康志愿者,在1.5T行腺苷负荷CMR并定量MBF和MPR,随后在101条冠状动脉行有创FFR和IMR测量作为参考标准。

关键影像表现/征象

  • FFR阳性(心外膜狭窄)区域负荷MBF为1.47±0.48 ml/g/min,MPR为1.75±0.60。
  • FFR阴性IMR阳性(MVD)区域负荷MBF为2.10±0.35 ml/g/min,MPR为2.41±0.79。
  • 正常区域负荷MBF为2.47±0.50 ml/g/min,MPR为2.94±0.81。
  • FFR阳性区域负荷MBF和MPR均低于FFR阴性IMR阳性区域和正常区域。

诊断标准与关键数值

  • 阻塞性CAD定义为FFR≤0.80,MVD定义为IMR≥25。
  • 区域性负荷MBF≤1.94 ml/g/min检测阻塞性CAD的AUC为0.90(p<0.001)。
  • 无区域性灌注缺损患者中,整体负荷MBF<1.82 ml/g/min区分阻塞性三支病变与MVD的AUC为0.94(p<0.001)。

临床应用与阅片要点

  • 自动像素级灌注映射可在临床工作流程中快速定量MBF和MPR。
  • 负荷MBF≤1.94 ml/g/min可用于区域性检测FFR定义的阻塞性CAD。
  • 无区域性灌注缺损时,整体负荷MBF<1.82 ml/g/min有助于区分阻塞性三支病变与MVD。
  • 作者认为该CMR灌注映射诊断算法用于检测心外膜病变和MVD需进一步临床验证。

局限性

  • 原文结论指出基于CMR灌注映射检测心外膜病变和MVD的诊断算法需进一步临床验证。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

OBJECTIVES: This study sought to assess the performance of cardiovascular magnetic resonance (CMR) myocardial perfusion mapping against invasive coronary physiology reference standards for detecting coronary artery disease (CAD, defined by fractional flow reserve [FFR] ≤0.80), microvascular dysfunction (MVD) (defined by index of microcirculatory resistance [IMR] ≥25) and the ability to differentiate between the two.

BACKGROUND: Differentiation of epicardial (CAD) and MVD in patients with stable angina remains challenging. Automated in-line CMR perfusion mapping enables quantification of myocardial blood flow (MBF) to be performed rapidly within a clinical workflow.

METHODS: Fifty patients with stable angina and 15 healthy volunteers underwent adenosine stress CMR at 1.5T with quantification of MBF and myocardial perfusion reserve (MPR). FFR and IMR were measured in 101 coronary arteries during subsequent angiography.

RESULTS: Twenty-seven patients had obstructive CAD and 23 had nonobstructed arteries (7 normal IMR, 16 abnormal IMR). FFR positive (epicardial stenosis) areas had significantly lower stress MBF (1.47 ± 0.48 ml/g/min) and MPR (1.75 ± 0.60) than FFR-negative IMR-positive (MVD) areas (stress MBF: 2.10 ± 0.35 ml/g/min; MPR: 2.41 ± 0.79) and normal areas (stress MBF: 2.47 ± 0.50 ml/g/min; MPR: 2.94 ± 0.81). Stress MBF ≤1.94 ml/g/min accurately detected obstructive CAD on a regional basis (area under the curve: 0.90; p < 0.001). In patients without regional perfusion defects, global stress MBF <1.82 ml/g/min accurately discriminated between obstructive 3-vessel disease and MVD (area under the curve: 0.94; p < 0.001).

CONCLUSIONS: This novel automated pixel-wise perfusion mapping technique can be used to detect physiologically significant CAD defined by FFR, MVD defined by IMR, and to differentiate MVD from multivessel coronary disease. A CMR-based diagnostic algorithm using perfusion mapping for detection of epicardial disease and MVD warrants further clinical validation.

来源:JACC Cardiovasc Imaging,查看原文。版权归原作者所有。

引用

  1. Kotecha T, Martinez-Naharro A, Boldrini M, et al. Automated Pixel-Wise Quantitative Myocardial Perfusion Mapping by CMR to Detect Obstructive Coronary Artery Disease and Coronary Microvascular Dysfunction: Validation Against Invasive Coronary Physiology. JACC Cardiovasc Imaging. 2019. PMID: 30772231. doi:10.1016/j.jcmg.2018.12.022

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。