机器学习模型在CT质量保证中用于剂量优化的潜力
模型以18.3%的预测与实际CTDIvol偏差为阈值标记剂量优化潜力,全部识别出放射科医生认为有优化潜力的7例,另标记1例仅模型发现的病例。机器学习可全面检测有剂量优化潜力的胸部CT,但最终仍需人工复核。
要点
- 机器学习模型以18.3%的预测与实际CTDIvol偏差为阈值,可标记有剂量优化潜力的胸部CT。
- 模型识别出全部7例放射科医生认为有剂量优化潜力的病例,另标记1例仅模型发现。
- 扫描仪和水当量直径是预测CTDIvol最重要的特征。
核心结论
- 机器学习可全面检测有剂量优化潜力的CT检查,可能有助于简化CT质量保证,但最终人工复核仍必要。
- 预测与实际CTDIvol之间18.3%的阈值似乎适用于CT质量保证。
研究设计与样本
- 模型基于扫描仪、检查描述、协议、患者年龄、性别和水当量直径(DW)预测容积CT剂量指数(CTDIvol),以均方根误差(RMSE)为性能指标。
- 另用100例连续胸部CT进行验证(2018年1月,男性60%,年龄63±16岁),由两名盲法放射科医生独立评估剂量优化潜力并确定模型最佳截断值。
诊断标准与关键数值
- 训练集、测试集和验证集的RMSE分别为1.71、1.45和1.52。
- 放射科医生在7/100例验证病例中发现剂量优化潜力。
- 预测与实际CTDIvol之间18.3%的百分比偏差为最佳截断值,模型标记8/100例为次优(范围18.3%-53.2%)。
- 模型识别出放射科医生发现的所有病例,另有1例检查仅被模型标记。
临床应用与阅片要点
- 机器学习可整合到CT质量保证中,改进CT剂量数据的回顾性分析。
- 机器学习可能有助于全面检测胸部CT的剂量优化潜力,但需要经验丰富的放射科医生或放射物理师对结果进行个体复核以排除假阳性。
局限性
- 最终人工复核仍必要。
- 需要经验丰富的放射科医生或放射物理师对结果进行个体复核以排除假阳性发现。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
OBJECTIVES: To evaluate machine learning (ML) to detect chest CT examinations with dose optimization potential for quality assurance in a retrospective, cross-sectional study.
METHODS: Three thousand one hundred ninety-nine CT chest examinations were used for training and testing of the feed-forward, single hidden layer neural network (January 2016-December 2017, 60% male, 62 ± 15 years, 80/20 split). The model was optimized and trained to predict the volumetric computed tomography dose index (CTDIvol) based on scan patient metrics (scanner, study description, protocol, patient age, sex, and water-equivalent diameter (DW)). The root mean-squared error (RMSE) was calculated as performance measurement. One hundred separate, consecutive chest CTs were used for validation (January 2018, 60% male, 63 ± 16 years), independently reviewed by two blinded radiologists with regard to dose optimization, and used to define an optimal cutoff for the model.
RESULTS: RMSE was 1.71, 1.45, and 1.52 for the training, test, and validation dataset, respectively. The scanner and DW were the most important features. The radiologists found dose optimization potential in 7/100 of the validation cases. A percentage deviation of 18.3% between predicted and actual CTDIvol was found to be the optimal cutoff: 8/100 cases were flagged as suboptimal by the model (range 18.3-53.2%). All of the cases found by the radiologists were identified. One examination was flagged only by the model.
CONCLUSIONS: ML can comprehensively detect CT examinations with dose optimization potential. It may be a helpful tool to simplify CT quality assurance. CT scanner and DW were most important. Final human review remains necessary. A threshold of 18.3% between the predicted and actual CTDIvol seems adequate for CT quality assurance.
KEY POINTS: • Machine learning can be integrated into CT quality assurance to improve retrospective analysis of CT dose data. • Machine learning may help to comprehensively detect dose optimization potential in chest CT, but an individual review of the results by an experienced radiologist or radiation physicist is required to exclude false-positive findings.
引用
- Meineke A, Rubbert C, Sawicki LM, et al. Potential of a machine-learning model for dose optimization in CT quality assurance. Eur Radiol. 2019. PMID: 30783785. doi:10.1007/s00330-019-6013-6
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。