文献速递心血管技术与安全US

三维打印心脏模型用于聚焦心脏超声教学

Three-Dimensional Printed Cardiac Models for Focused Cardiac Ultrasound Instruction.
PubMed 文献 · J Ultrasound Med · 2018-09-24

本研究将20名无床旁超声经验的一年级医学生随机分为传统授课组(n=10)和三维打印心脏模型工作坊组(n=10),比较0月和3月时的笔试及3月时的图像采集能力;结果显示两组在技能获得和知识保留方面相似,三维心脏模型相对便宜、便携且可重复使用。

要点

  • 三维打印心脏模型工作坊在聚焦心脏超声教学中可获得与传统授课相似的技能获得和知识保留。
  • 两组3月时图像采集实践评分分别为传统组5分制3.3分与三维心脏组5分制2.7分(P=0.1)。
  • 三维心脏模型相对便宜、便携且可重复使用,可让学习者在灵活间隔反复练习。

核心结论

  • 在聚焦心脏超声工作坊中使用三维心脏模型可获得与传统授课相似的技能获得和知识保留。

研究设计与样本

  • 随机对照教学研究,20名无床旁超声经验的一年级医学生随机分为传统授课组(n=10)和三维打印心脏模型工作坊组(n=10),比较0月和3月时的笔试及3月时的图像采集能力;原文未报告中心数、设备/序列及参考标准。

诊断标准与关键数值

  • 0月时初次书面结构识别中位分数:传统组74% vs 三维心脏组90%(P=0.7)。
  • 3月时第二次笔试中位分数:传统组56% vs 三维心脏组58%(P=0.8)。
  • 3月时图像采集实践平均分数:传统组5分制3.3分 vs 三维心脏组5分制2.7分(P=0.1)。

临床应用与阅片要点

  • 作者认为,三维心脏模型以工作坊形式用于聚焦心脏超声教学可获得与传统授课相似的技能获得和知识保留。
  • 作者指出,三维心脏模型相对便宜、便携且可重复使用,可让学习者在灵活间隔反复练习。
  • 作者指出,持续费用降低及可大组教学可能降低培训成本以及对当地师资专业知识的需要。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

BACKGROUND: Focused cardiac ultrasonography (FCU) is an increasingly integral component of routine medical training and practice. While various instructional methods have been described, few attempts have been made to incorporate a physical 3-dimensional (3D) instructional aid.

OBJECTIVE: The aim of this study was to determine if a 3D printed heart model workshop for FCU instruction leads to equivalent structure recognition and scanning ability compared to traditional didactic FCU instruction.

INTERVENTION: Twenty first-year medical students with no point-of-care ultrasonography experience were randomly assigned to a traditional lecture (n = 10) or a 3D printed heart model workshop (n = 10). Written examinations at 0 and 3 months as well as image acquisition at 3 months were compared.

RESULTS: The median scores from the initial written structure identification in the traditional and 3D heart groups were 74% and 90%, respectively (P = 0.7). The second written exam at 3 months yielded median scores of 56% and 58% in the traditional and 3D heart groups, respectively (P = 0.8). The average scores on the image acquisition practical at 3 months were 3.3 of 5 and 2.7 of 5 (P = 0.1) in the traditional and 3D heart groups, respectively.

CONCLUSIONS: Utilizing 3D heart models in an FCU workshop format results in similar skill acquisition and knowledge retention as traditional didactics. The 3D heart models are relatively inexpensive, portable, and reusable, enabling learners to practice repeatedly and at flexible intervals. The reduction in ongoing expenses and the ability to teach large groups may decrease training costs as well as the need for local faculty expertise.

来源:J Ultrasound Med,查看原文。版权归原作者所有。

引用

  1. Ochoa S, Segal J, Garcia N, et al. Three-Dimensional Printed Cardiac Models for Focused Cardiac Ultrasound Instruction. J Ultrasound Med. 2018. PMID: 30246888. doi:10.1002/jum.14818

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。