文献速递骨肌MR

应用二维U-Net卷积神经网络对膝关节MR成像数据进行软骨和半月板自动分割以确定弛豫测量和形态学参数

Use of 2D U-Net Convolutional Neural Networks for Automated Cartilage and Meniscus Segmentation of Knee MR Imaging Data to Determine Relaxometry and Morphometry.
PubMed 文献 · Radiology · 2018-03-27

这项回顾性研究分析两个3.0T队列的638个MR成像容积,开发基于U-Net的深度学习模型自动分割膝关节软骨和半月板,并与人工分割比较。模型在3D-DESS图像上Dice系数较高,自动与人工定量T1ρ和T2值的平均相关系数分别为0.8233和0.8603,体积和厚度分别为0.9349和0.9384,纵向精度与人工方法相当。

要点

  • U-Net模型在3D-DESS图像上分割软骨和半月板的Dice系数为0.770–0.878(软骨)及0.809(外侧半月板)、0.753(内侧半月板)。
  • 自动分割平均5秒生成,自动与人工定量T1ρ和T2值的平均相关系数分别为0.8233和0.8603。
  • 自动方法纵向精度与人工方法相当,可用于提取弛豫时间和形态学特征以辅助OA监测和诊断。

核心结论

  • U-Net能快速生成准确分割,用于提取弛豫时间和形态学特征,其数值可用于OA的监测和诊断,且纵向精度与人工分割相当。

研究设计与样本

  • 回顾性研究,分析两个数据队列共638个3.0T MR成像容积,包括spoiled gradient-recalled acquisition in the steady state T1ρ加权图像和三维双回波稳态(3D-DESS)图像;开发基于U-Net卷积网络架构的深度学习模型进行自动分割,由熟练技师和放射科医师人工分割软骨和半月板作为对照。

诊断标准与关键数值

  • 自动分割性能以与人工分割的Dice系数重叠评估:软骨 compartments 为0.770–0.878,外侧半月板为0.809,内侧半月板为0.753,尤其在3D-DESS图像上较高;自动与人工定量T1ρ和T2值的平均相关系数分别为0.8233和0.8603,体积和厚度分别为0.9349和0.9384;自动分割平均5秒生成。

临床应用与阅片要点

  • 作者结论认为U-Net能快速生成准确分割,可用于提取弛豫时间和形态学特征,其数值可用于OA的监测和诊断。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

Purpose To analyze how automatic segmentation translates in accuracy and precision to morphology and relaxometry compared with manual segmentation and increases the speed and accuracy of the work flow that uses quantitative magnetic resonance (MR) imaging to study knee degenerative diseases such as osteoarthritis (OA). Materials and Methods This retrospective study involved the analysis of 638 MR imaging volumes from two data cohorts acquired at 3.0 T: (a) spoiled gradient-recalled acquisition in the steady state T1ρ-weighted images and (b) three-dimensional (3D) double-echo steady-state (DESS) images. A deep learning model based on the U-Net convolutional network architecture was developed to perform automatic segmentation. Cartilage and meniscus compartments were manually segmented by skilled technicians and radiologists for comparison. Performance of the automatic segmentation was evaluated on Dice coefficient overlap with the manual segmentation, as well as by the automatic segmentations' ability to quantify, in a longitudinally repeatable way, relaxometry and morphology. Results The models produced strong Dice coefficients, particularly for 3D-DESS images, ranging between 0.770 and 0.878 in the cartilage compartments to 0.809 and 0.753 for the lateral meniscus and medial meniscus, respectively. The models averaged 5 seconds to generate the automatic segmentations. Average correlations between manual and automatic quantification of T1ρ and T2 values were 0.8233 and 0.8603, respectively, and 0.9349 and 0.9384 for volume and thickness, respectively. Longitudinal precision of the automatic method was comparable with that of the manual one. Conclusion U-Net demonstrates efficacy and precision in quickly generating accurate segmentations that can be used to extract relaxation times and morphologic characterization and values that can be used in the monitoring and diagnosis of OA. © RSNA, 2018 Online supplemental material is available for this article.

来源:Radiology,查看原文。版权归原作者所有。

引用

  1. Norman B, Pedoia V, Majumdar S, et al. Use of 2D U-Net Convolutional Neural Networks for Automated Cartilage and Meniscus Segmentation of Knee MR Imaging Data to Determine Relaxometry and Morphometry. Radiology. 2018. PMID: 29584598. doi:10.1148/radiol.2018172322

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。