文献速递儿科影像技术与安全CT

体型特异性剂量估算计算方法比较研究

A comparison study of size-specific dose estimate calculation methods.
PubMed 文献 · Pediatr Radiol · 2017-09-27

该研究回顾性纳入109例儿童体部CT检查,比较了基于厚度和基于体重计算体型特异性剂量估算(SSDE)的多种方法。各SSDE计算方法间一致性相关系数ρc均大于0.92,但与CTDIvol相关性差(ρc<0.77),百分比差异20.8%至51.0%。自动化算法准确高效;基于厚度的手动方法对体宽<30 cm的儿童可接受;体重法对体宽≥20 cm的儿童可较准确估算转换因子。

要点

  • 自动化算法计算SSDE准确高效,各方法间一致性ρc>0.92。
  • 基于厚度的手动方法对体宽<30 cm的儿童可提供可接受的剂量估算。
  • 体重法对体宽≥20 cm的儿童可较准确估算SSDE转换因子。

核心结论

  • 自动化计算机算法计算SSDE准确且高效。
  • 基于患者厚度的手动方法对体宽<30 cm的儿科患者提供可接受的剂量估算。
  • 体重提供了一种快速实用的方法来确定转换因子,可在体宽≥20 cm的儿科患者中以合理精度估算SSDE。

研究设计与样本

  • 回顾性研究,纳入109例儿童体部CT检查用于SSDE计算。
  • 方法A采用有效直径,方法B采用水等效直径,均为自动测量系列层面特异性直径。
  • 方法C在L2上终板及股骨头或髂嵴上缘两个层面从CT投影扫描平均侧径测量。
  • 方法D在相同两个层面从轴位CT图像平均侧径和前后径测量。
  • 方法E采用体重表征患者体型,并与其它方法比较。

诊断标准与关键数值

  • 各SSDE计算方法(A-E)间一致性相关系数ρc在全人群均>0.92,亚组分析范围0.42-0.99。
  • 各SSDE方法与CTDIvol比较相关性差,ρc<0.77,百分比差异20.8%至51.0%。

临床应用与阅片要点

  • 自动化算法可用于准确高效地计算儿科体部CT的SSDE。
  • 对体宽<30 cm的儿科患者,基于厚度的手动方法可提供可接受的剂量估算。
  • 对体宽≥20 cm的儿科患者,体重法可快速实用地确定转换因子以合理精度估算SSDE。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

BACKGROUND: The size-specific dose estimate (SSDE) has emerged as an improved metric for use by medical physicists and radiologists for estimating individual patient dose. Several methods of calculating SSDE have been described, ranging from patient thickness or attenuation-based (automated and manual) measurements to weight-based techniques.

OBJECTIVE: To compare the accuracy of thickness vs. weight measurement of body size to allow for the calculation of the size-specific dose estimate (SSDE) in pediatric body CT.

MATERIALS AND METHODS: We retrospectively identified 109 pediatric body CT examinations for SSDE calculation. We examined two automated methods measuring a series of level-specific diameters of the patient's body: method A used the effective diameter and method B used the water-equivalent diameter. Two manual methods measured patient diameter at two predetermined levels: the superior endplate of L2, where body width is typically most thin, and the superior femoral head or iliac crest (for scans that did not include the pelvis), where body width is typically most thick; method C averaged lateral measurements at these two levels from the CT projection scan, and method D averaged lateral and anteroposterior measurements at the same two levels from the axial CT images. Finally, we used body weight to characterize patient size, method E, and compared this with the various other measurement methods. Methods were compared across the entire population as well as by subgroup based on body width.

RESULTS: Concordance correlation (ρc) between each of the SSDE calculation methods (methods A-E) was greater than 0.92 across the entire population, although the range was wider when analyzed by subgroup (0.42-0.99). When we compared each SSDE measurement method with CTDIvol, there was poor correlation, ρc<0.77, with percentage differences between 20.8% and 51.0%.

CONCLUSION: Automated computer algorithms are accurate and efficient in the calculation of SSDE. Manual methods based on patient thickness provide acceptable dose estimates for pediatric patients <30 cm in body width. Body weight provides a quick and practical method to identify conversion factors that can be used to estimate SSDE with reasonable accuracy in pediatric patients with body width ≥20 cm.

来源:Pediatr Radiol,查看原文。版权归原作者所有。

引用

  1. Parikh RA, Wien MA, Novak RD, et al. A comparison study of size-specific dose estimate calculation methods. Pediatr Radiol. 2017. PMID: 28951948. doi:10.1007/s00247-017-3986-7

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。