立场文件:数字乳腺X线摄影质量保证计划的建议 V4.0
澳大利亚与新西兰临床物理与工程科学学院(ACPSEM)发布数字乳腺X线摄影质量保证立场文件 V4.0,在既往版本基础上新增数字乳腺断层摄影(DBT)测试与质控内容,并增加常规投影成像的剂量调查测试以确认是否符合国家或州级诊断参考水平(DRL),推荐采用 Dance 等方法进行剂量学计算。
要点
- V4.0 新增数字乳腺断层摄影(DBT)的测试与质控内容,并增加常规投影成像的剂量调查测试以确认是否符合诊断参考水平(DRL)。
- 关键推荐:剂量学计算采用 Dance 等的方法。
- 文件对现有设备质控测试做了小幅修改,使建议程序与澳大利亚与新西兰放射科医师皇家学院(RANZCR)及 BreastScreen Australia 最近采纳的程序一致。
核心结论
- 文件描述数字乳腺X线摄影质量保证的当前状态,并推荐可能适合澳大利亚与新西兰环境的测试程序。
- 未来数字乳腺X线摄影质量保证的国际统一及技术变化可能要求对本文件进行复审。
研究设计与样本
- 澳大利亚与新西兰临床物理与工程科学学院(ACPSEM)发布的立场文件,基于对当前海外实践与本地区经验的复审制定。
- 文件涵盖数字乳腺X线摄影质量保证的测试程序,并包括乳腺X线摄影所用各类数字活检单元的质控计划复审。
诊断标准与关键数值
- V4.0 新增数字乳腺断层摄影(DBT)测试与质控内容,并增加常规投影成像的剂量调查测试以确认是否符合国家或州级诊断参考水平(DRL)。
- 关键推荐:剂量学计算采用 Dance 等的方法。
- 对现有设备质控测试做小幅修改,使建议程序与澳大利亚与新西兰放射科医师皇家学院(RANZCR)及 BreastScreen Australia 最近采纳的程序一致。
- 版本 2.0 的关键变化涉及图像质量评价、鬼影图像评价和信噪比测量解读;版本 3.0 根据数字乳腺X线摄影设备测试的进一步经验引入若干重要变化。
临床应用与阅片要点
- 文件推荐可能适合澳大利亚与新西兰环境的数字乳腺X线摄影质量保证测试程序。
- 文件推荐剂量学计算采用 Dance 等的方法。
- 文件推荐对数字乳腺断层摄影(DBT)进行测试与质控。
- 文件推荐进行常规投影成像的剂量调查测试以确认是否符合国家或州级诊断参考水平(DRL)。
局限性
- 当前数字成像技术正处于显著发展阶段,国际上对质量保证计划中应包含哪些详细质控测试仍缺乏完全共识。
- 未来数字乳腺X线摄影质量保证的国际统一及技术变化可能要求对本文件进行复审。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
In 2001 the ACPSEM published a position paper on quality assurance in screen film mammography which was subsequently adopted as a basis for the quality assurance programs of both the Royal Australian and New Zealand College of Radiologists (RANZCR) and of BreastScreen Australia. Since then the clinical implementation of digital mammography has been realised and it has become evident that existing screen-film protocols were not appropriate to assure the required image quality needed for reliable diagnosis or to address the new dose implications resulting from digital technology. In addition, the advantages and responsibilities inherent in teleradiology are most critical in mammography and also need to be addressed. The current document is the result of a review of current overseas practice and local experience in these areas. At this time the technology of digital imaging is undergoing significant development and there is still a lack of full international consensus about some of the detailed quality control (QC) tests that should be included in quality assurance (QA) programs. This document describes the current status in digital mammography QA and recommends test procedures that may be suitable in the Australasian environment. For completeness, this document also includes a review of the QA programs required for the various types of digital biopsy units used in mammography. In the future, international harmonisation of digital quality assurance in mammography and changes in the technology may require a review of this document. Version 2.0 represented the first of these updates and key changes related to image quality evaluation, ghost image evaluation and interpretation of signal to noise ratio measurements. In Version 3.0 some significant changes, made in light of further experience gained in testing digital mammography equipment were introduced. In Version 4.0, further changes have been made, most notably digital breast tomosynthesis (DBT) testing and QC have been addressed. Some additional testing for conventional projection imaging has been added in order that sites may have the capability to undertake dose surveys to confirm compliance with diagnostic reference levels (DRLs) that may be established at the National or State level. A key recommendation is that dosimetry calculations are now to be undertaken using the methodology of Dance et al. Some minor changes to existing facility QC tests have been made to ensure the suggested procedures align with those most recently adopted by the Royal Australian and New Zealand College of Radiologists and BreastScreen Australia. Future updates of this document may be provided as deemed necessary in electronic format on the ACPSEM's website ( https://www.acpsem.org.au/whatacpsemdoes/standards-position-papers and see also http://www.ranzcr.edu.au/quality-a-safety/radiology/practice-quality-activities/mqap ).
引用
- Heggie JCP, Barnes P, Cartwright L, et al. Position paper: recommendations for a digital mammography quality assurance program V4.0. Australas Phys Eng Sci Med. 2017. PMID: 28914430. doi:10.1007/s13246-017-0583-x
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。