文献速递妇产影像US

利用三维超声数据自动检测妊娠早期标准矢状面

Automatic Detection of Standard Sagittal Plane in the First Trimester of Pregnancy Using 3-D Ultrasound Data.
PubMed 文献 · Ultrasound Med Biol · 2016-10-31

本文提出一种基于三维超声数据的自动矢状面检测方法,将矢状面检测转化为对称面与轴搜索问题,并利用深度信念网络和改进圆检测提供先验知识;实验显示88.6%的结果平面距离误差小于4 mm,71.0%的角度误差小于20°。

要点

  • 自动检测矢状面:88.6%结果平面距离误差小于4 mm。
  • 71.0%的结果平面角度误差小于20°。
  • 方法将矢状面检测转化为对称面与轴搜索问题。

核心结论

  • 提出的自动方法在多数情况下可同时获得较小的距离误差和角度误差,88.6%的结果平面距离误差小于4 mm,71.0%的角度误差小于20°。

研究设计与样本

  • 研究论文,提出基于三维超声数据的自动矢状面检测方法,利用深度信念网络和改进圆检测方法提供搜索先验知识。

诊断标准与关键数值

  • 88.6%的结果平面距离误差小于4 mm。
  • 71.0%的结果平面角度误差小于20°。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

Fetal nuchal translucency (NT) thickness is one of the most important parameters in prenatal screening. Locating the mid-sagittal plane is one of the key points to measure NT. In this paper, an automatic method for the sagittal plane detection using 3-D ultrasound data is proposed. To avoid unnecessary massive searching and the corresponding huge computation load, a model is proposed to turn the sagittal plane detection problem into a symmetry plane and axis searching problem. The deep belief network (DBN) and a modified circle detection method provide prior knowledge for the searching. The experiments show that in most cases, the result plane has small distance error and angle error at the same time-88.6% of the result planes have a distance error less than 4 mm and 71.0% have angle error less than 20°.

来源:Ultrasound Med Biol,查看原文。版权归原作者所有。

引用

  1. Nie S, Yu J, Chen P, et al. Automatic Detection of Standard Sagittal Plane in the First Trimester of Pregnancy Using 3-D Ultrasound Data. Ultrasound Med Biol. 2016. PMID: 27810260. doi:10.1016/j.ultrasmedbio.2016.08.034

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。