人工智能辅助自动测量韩国国家肺癌筛查CT项目中最大主动脉直径
本研究基于2家三级中心2017年4月至2023年12月的1204例低剂量胸部CT肺癌筛查基线扫描,在100例随机样本中比较放射科医生与AI测量的最大主动脉直径,组内相关系数在升主动脉、主动脉弓、降主动脉和腹主动脉分别为0.950、0.758、0.933和0.931,AI随后分析全部扫描并评估冠状动脉钙化与最大主动脉直径的相关性,结果显示最大主动脉直径与冠状动脉钙化严重程度显著相关(P ≤ .001)。
要点
- AI与放射科医生测量最大主动脉直径的组内相关系数在升主动脉、主动脉弓、降主动脉和腹主动脉分别为0.950、0.758、0.933和0.931。
- 升主动脉平均最大直径为38.7 ± 3.7 mm,其中33.4% ≥ 40 mm、18.5% ≥ 42 mm、5.6% ≥ 45 mm。
- 最大主动脉直径与冠状动脉钙化严重程度显著相关(P ≤ .001)。
核心结论
- AI软件可可靠测量最大主动脉直径,主动脉扩张分布在低剂量胸部CT肺癌筛查中可作为参考,其与冠状动脉钙化的关联提示将最大主动脉直径纳入患者管理具有临床重要性。
研究设计与样本
- 研究回顾了2家三级中心2017年4月至2023年12月的低剂量胸部CT肺癌筛查基线扫描,共纳入1204例患者(99.2%为男性,平均年龄±标准差62.7 ± 5.4岁),在100例随机选取病例中比较放射科医生与AI测量的最大主动脉直径,AI随后分析全部扫描并以Agatston法评估冠状动脉钙化。
诊断标准与关键数值
- 放射科医生与AI测量最大主动脉直径的组内相关系数:升主动脉0.950、主动脉弓0.758、降主动脉0.933、腹主动脉0.931。
- 平均最大直径:升主动脉38.7 ± 3.7 mm(33.4% ≥ 40 mm、18.5% ≥ 42 mm、5.6% ≥ 45 mm)、主动脉弓37.3 ± 3.3 mm、降主动脉29.4 ± 2.9 mm、腹主动脉26.3 ± 2.3 mm。
- 最大主动脉直径与冠状动脉钙化严重程度显著相关(P ≤ .001)。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
OBJECTIVES: Management guidelines for incidental aortic dilation detected on low-dose chest computed tomography (LDCT) lung cancer screening (LCS) are lacking. Therefore, this study aims to validate artificial intelligence (AI) software for automated aortic measurements and assess aortic dilation distribution in screening participants.
METHODS: Baseline LDCT scans from 2 tertiary centres (April 2017 to December 2023) were reviewed. In 100 randomly selected cases, radiologist- and AI-measured maximum aortic diameters (MADs) were compared at the ascending thoracic aorta (ATA), aortic arch (AACH), descending thoracic aorta (DTA), and abdominal aorta (AA). AI then analysed all scans, and coronary artery calcification (CAC) was assessed using the Agatston method to evaluate correlations with MADs.
RESULTS: Overall, 1204 patients (99.2% men; mean age ± SD: 62.7 ± 5.4 years) were included. Intraclass correlation coefficients between radiologists and AI were 0.950, 0.758, 0.933, and 0.931 for ATA, AACH, DTA, and AA, respectively. Mean maximum diameters were: ATA, 38.7 ± 3.7 mm (33.4% ≥ 40 mm, 18.5% ≥ 42 mm, and 5.6% ≥ 45 mm); AACH, 37.3 ± 3.3 mm; DTA, 29.4 ± 2.9 mm; and AA, 26.3 ± 2.3 mm. MADs significantly correlated with CAC severity (P ≤ .001).
CONCLUSIONS: AI software reliably measures MADs. Aortic dilation distribution may serve as a reference in LDCT LCS, and its association with CAC highlights the clinical importance of incorporating MADs into patient management.
ADVANCES IN KNOWLEDGE: Validated AI software enables reliable MAD assessment; reported aortic dilation prevalence offers valuable reference data for LDCT LCS.
引用
- Park C, Lee HJ, Jeong WG, et al. Artificial intelligence-assisted automated measurement of maximum aortic diameter in the Korean national lung cancer screening CT program. Br J Radiol. 2026. PMID: 41428449. doi:10.1093/bjr/tqaf316
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。