AI辅助测量与报告在腿部和足部X线摄影中提升工作流程效率的观察性评估
本研究回顾性收集腿部和足部X线片,由低年资放射科医生先手动后AI辅助完成关键测量,并通过口述和AI生成报告模拟不同工作流程。结果显示AI辅助使测量时间从166秒降至40秒、报告时间从80秒降至33秒(均p<0.001),全自动流程总解读时间从246秒降至73秒,效率提升70%,且AI测量准确性与低年资医生相当。
要点
- AI辅助使腿部和足部X线测量时间从166秒降至40秒(p<0.001)。
- AI辅助使报告时间从80秒降至33秒(p<0.001)。
- 全自动流程总解读时间从246秒降至73秒,效率提升70%。
核心结论
- AI辅助在不影响测量准确性的前提下改善了腿部和足部X线摄影的工作流程效率。
- 将自动测量和报告整合到端到端工作流程中,有望简化临床实践。
研究设计与样本
- 回顾性收集腿部和足部X线片,由一位高年资肌骨放射科医生手动标注关键测量作为参考标准。
- 同一位低年资放射科医生先手动、后AI辅助完成相同测量,报告先通过口述、后使用AI生成报告。
- 基于上述操作模拟三种工作流程:手动测量加口述、AI辅助测量加口述、AI辅助测量加自动报告。
- 共分析98张腿部X线片和101张足部X线片,使用BoneMetrics和AutoReport(Gleamer,巴黎,法国)。
诊断标准与关键数值
- AI解决方案的测量准确性与低年资放射科医生表现相当。
- AI辅助下测量时间从166秒降至40秒(p<0.001),报告时间从80秒降至33秒(p<0.001)。
- 全手动流程总解读时间为246秒,全自动流程为73秒,效率提升70%。
临床应用与阅片要点
- 原文结论提示AI辅助测量和自动报告可能用于简化腿部和足部X线的解读流程,但原文未给出具体阅片建议。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
RATIONALE AND OBJECTIVES: Radiographic musculoskeletal (MSK) measurements are essential for diagnosis and surgical planning, but they remain time-consuming and prone to variability. Artificial intelligence (AI) can address these limitations by automating both measurements and reporting. This study assessed the impact of AI-assisted measurements and reporting on workflow efficiency for leg and foot radiographs using BoneMetrics and AutoReport (Gleamer, Paris, France).
MATERIALS AND METHODS: Leg and foot radiographs were collected retrospectively. The ground truth was established by a senior MSK radiologist through manual annotation of key measurements. The same measurements were performed by a junior radiologist first manually, and subsequently with AI assistance. Reports were then generated by the radiologist via voice dictation and subsequently using AI-generated reports. These sessions formed the basis for simulated workflows: manual measurements with dictation, AI-assisted measurements with dictation, AI-assisted measurements with automated reporting.Measurement accuracy was compared between the AI solution and the junior radiologist.
RESULTS: A total of 98 leg radiographs and 101 foot radiographs were analyzed by the junior radiologist. Measurement time was significantly reduced from 166 to 40 s (p < 0.001) and reporting time from 80 s to 33 s (p < 0.001) with AI assistance. When combining both steps into simulated workflows, total interpretation time decreased from 246 s in the fully manual workflow to 73 s in the fully automated workflow, representing a 70 % gain in efficiency. The AI solution demonstrated high measurement accuracy with performance comparable to that of the junior radiologist.
CONCLUSION: This study demonstrated that AI assistance improved workflow efficiency in leg and foot radiography without compromising measurement accuracy. Integrating automated measurements and reporting in the end-to-end workflow holds promise for streamlining clinical practice.
引用
- Talabard MP, Durteste M, Hamid A, et al. Observational evaluation of AI-assisted measurements and reporting for enhanced workflow efficiency in leg and foot radiographs. Eur J Radiol. 2025. PMID: 41242318. doi:10.1016/j.ejrad.2025.112516
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。