基于分割辅助与CoLlAGe特征提取的多模态CT-MRI配准可行性研究
本研究提出一种结合特征配准与分割的框架,用于解决MRI到CT的多模态图像配准问题,重点关注肝脏临床应用。框架包括肝脏分割、CoLlAGe特征提取和基于特征的图像配准三个阶段。24对MRI到CT配准结果显示,Dice系数为0.921±0.038,平均对称表面距离为0.086±0.213 mm,所有Dice系数均大于0.8,多数ASSD接近0毫米。作者认为该框架在多模态MR到CT配准研究中具有潜力,配准精度对于肝脏手术应用可接受。
要点
- 24对MRI到CT配准的Dice系数均大于0.8,平均0.921±0.038。
- 平均对称表面距离为0.086±0.213 mm,多数结果接近0毫米。
- 作者认为该配准精度对于肝脏手术应用可接受。
核心结论
- 所提出的框架在多模态MR到CT配准研究中具有潜力,肝脏MR到CT配准的精度对于肝脏手术应用可接受。
研究设计与样本
- 可行性研究,共24对MRI到CT配准,使用预训练nnU-Net模型对CT和MRI图像进行肝脏分割,提取分割肝脏区域内的CoLlAGe特征,并基于这些特征进行图像配准。
诊断标准与关键数值
- 配准评估指标:Dice系数均大于0.8,平均±标准差为0.921±0.038;平均对称表面距离(ASSD)平均±标准差为0.086±0.213 mm,多数ASSD结果接近0毫米。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
PURPOSE: This study proposes a framework to address the problem of multimodal MRI-to-CT image registration by incorporating feature-based registration approach and segmentation, focusing especially on liver-specific clinical applications.
METHODS: The proposed framework consists of three key stages: (1) liver segmentation using pretrained nnU-Net models for both CT and MRI images, (2) CoLlAGe features extraction within the segmented liver regions to preserve spatial information of the region of interest (ROI), and (3) image registration based on these extracted features.
RESULTS: Across 24 pairs of registration from MRI to CT, most of the Average Symmetric Surface Distance (ASSD) results are close to 0 millimeters, and all Dice coefficients are greater than 0.8. The values of mean ± standard deviation show that the Dice coefficient is 0.921 ± 0.038, the ASSD is 0.086 ± 0.213 mm.
CONCLUSION: These results demonstrate the potential of the proposed framework in the study of multimodal MR-to-CT registration. The precision of liver MR-to-CT registration is considered acceptable for liver surgical applications.
引用
- Nguyen HP, Jang SY, Kim S, et al. A feasibility study on multimodal CT-MRI registration using segmentation aid and CoLlAGe feature extraction approach. Abdom Radiol (NY). 2025. PMID: 41307674. doi:10.1007/s00261-025-05264-5
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。