光子计数CT评估颅内动脉瘤栓塞术后表现
本研究利用模拟颅内动脉瘤栓塞治疗后的体模,比较常规能量积分CT与光子计数CT(PCCT)不同采集和重建参数对图像质量的影響。结果显示55 keV虚拟单能图像联合金属伪影削减算法(iMAR)可提供最佳的对比噪声比和较低的金属伪影,作者认为该方案在PCCT上可清晰显示治疗过的颅内动脉瘤及邻近血管,并初步可行于临床患者。
要点
- 55 keV虚拟单能图像联合iMAR在PCCT上显示栓塞动脉瘤及邻近血管的对比噪声比最高。
- 应用iMAR后,邻近弹簧圈团最大血管的对比噪声比在所有图像上均升高。
- 55 keV虚拟单能图像在应用iMAR前后对比噪声比均为最高(应用前3.61,应用后6.82)。
核心结论
- PCCT扫描生成的虚拟单能图像联合金属伪影削减算法可对治疗过的颅内动脉瘤及邻近血管提供极佳显示。
- 作者认为将这些结果扩展到人类患者的初步临床应用是可行的。
研究设计与样本
- 体模研究,使用模拟大脑主要颅内动脉的模型,包含尺寸合适的经血管内治疗的大脑中动脉(弹簧圈栓塞)和基底动脉(Woven EndoBridge栓塞)动脉瘤。
- 使用常规能量积分CT扫描仪和PCCT扫描仪进行一系列成像采集,变化关键采集和重建参数以确定表征治疗动脉瘤的最佳协议。
- 所有图像均使用迭代金属伪影削减(iMAR)算法(Siemens)进行伪影削减。
关键影像表现/征象
- 100 keV虚拟单能图像的定量金属伪影幅度较大,55 keV虚拟单能图像在不应用iMAR时金属伪影幅度最低,但应用iMAR后该趋势逆转。
- 55 keV虚拟单能图像被选为显示治疗颅内动脉瘤的最佳重建参数,因其金属伪影幅度低且邻近血管对比噪声比最高。
- 应用iMAR后,邻近弹簧圈团的最大血管对比噪声比在所有图像上均升高。
诊断标准与关键数值
- 55 keV虚拟单能图像在应用iMAR前对比噪声比为3.61(SD,0.14),应用iMAR后为6.82(SD,0.34),均为最高。
临床应用与阅片要点
- 作者认为PCCT虚拟单能图像联合金属伪影削减算法可清晰显示治疗过的颅内动脉瘤及邻近血管。
- 作者认为将这些结果扩展到人类患者的初步临床应用是可行的。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
BACKGROUND AND PURPOSE: Intracranial aneurysms treated with endovascular embolization often require surveillance imaging using DSA, an invasive, risky, and expensive procedure. Existing noninvasive imaging modalities (standard or MRA) are often unsatisfactory for evaluating treated aneurysms due to artifacts from embolization devices. The objective of the present study was to determine whether photon-counting CT (PCCT) imaging parameters could be optimized to confer satisfactory imaging resolution in an anthropomorphic phantom of treated intracranial aneurysms.
MATERIALS AND METHODS: Phantom studies were performed using a model of the major intracranial arteries with appropriately sized, endovascularly-treated MCA (coil embolization) and basilar artery (Woven EndoBridge embolization) aneurysms. A series of imaging acquisition procedures was performed using a conventional energy-integrating CT scanner and a PCCT scanner. Key imaging acquisition and reconstruction parameters were varied to identify the optimum protocol for treated aneurysm characterization. Artifact reduction was performed on all images using the iterative metal artifact reduction (iMAR) algorithm (Siemens). Contrast-to-noise ratio (CNR) and metal artifact magnitude were quantitatively analyzed and displayed in tabular form to provide objective criteria for determination of optimal processing parameters for treated aneurysm visualization.
RESULTS: Imaging was successfully obtained in phantom studies across a range of imaging parameters. Quantitative metal artifact magnitude was greater for 100 keV virtual monoenergetic images (VMIs) and lowest for 55 keV VMIs without iMAR, but this trend was reversed with iMAR applied. The 55 keV VMI was chosen as the optimal reconstruction parameter for visualization of treated intracranial aneurysms because it demonstrated a low magnitude of metal artifacts and the highest CNR in adjacent vasculature. Similarly, the CNR of the largest vessel adjacent to the coil mass was increased for all images after iMAR was applied. CNR was highest in the 55- keV VMR images both before (3.61 [SD, 0.14]) and after (6.82 [SD, 0.34]) application of iMAR.
CONCLUSIONS: Virtual monoenergetic images combined with metal artifact reduction algorithms created from PCCT scans conferred excellent visualization of previously-treated intracranial aneurysms and adjacent vasculature. It was feasible to extend these results to preliminary clinical applications in human patients.
引用
- Mac Grory B, Randles A, Urick DM, et al. Photon-Counting CT for Evaluation of Coiled Intracranial Aneurysms. AJNR Am J Neuroradiol. 2026. PMID: 40973460. doi:10.3174/ajnr.A9015
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。