超声衰减成像评估肝脂肪变时感兴趣区最佳位置的初步研究
该回顾性研究纳入143例因代谢功能障碍相关脂肪性肝病(MAFLD)行经皮肝穿刺活检的患者,评估超声衰减成像(ATI)中感兴趣区(ROI)四种不同放置位置对肝脂肪变分级的诊断价值。结果显示,将ATI-ROI放置于深橙色区域下缘下方1 cm处(P4)时,对≥S1、≥S2和S3脂肪变的AUC最高,分别为0.809、0.865和0.949。结论认为肝脂肪变分级是ATI值的最显著决定因素,测量时应避开代表混响伪影的深橙色区域,将ROI置于其下缘下方1 cm可能是更好的选择。
要点
- ATI-ROI置于深橙色区域下缘下方1 cm处(P4)对≥S1、≥S2和S3脂肪变的AUC分别为0.809、0.865和0.949。
- ATI-ROI置于采样框上缘(P1)时诊断效能最低,对≥S1、≥S2和S3的AUC分别为0.472、0.544和0.655。
- 肝脂肪变分级是ATI值最显著的决定因素(P<0.001),测量时应避开代表混响伪影的深橙色区域。
核心结论
- 肝脂肪变分级是多因素分析中ATI值最显著的决定因素;临床行ATI测量时应避开指示混响伪影区域的深橙色区域,将ATI-ROI置于深橙色区域下缘下方1 cm处可能是更好的选择。
研究设计与样本
- 回顾性纳入2020年10月至2022年10月间因评估MAFLD行经皮肝穿刺活检的连续143例患者,所有ATI测量由同一名放射科医生完成,以肝活检为参考标准,采用专用工作站将ATI-ROI置于四个不同位置:采样框上缘(P1)、深橙色区域下缘(P2)、深橙色区域下缘下方0.5 cm(P3)和1 cm(P4),行多因素线性回归和AUC分析。
关键影像表现/征象
- ATI-ROI置于采样框上缘(P1)时对≥S1、≥S2和S3脂肪变的AUC分别为0.472、0.544和0.655。
- ATI-ROI置于深橙色区域下缘(P2)时对≥S1、≥S2和S3脂肪变的AUC分别为0.693、0.779和0.904。
- ATI-ROI置于深橙色区域下缘下方0.5 cm(P3)时对≥S1、≥S2和S3脂肪变的AUC分别为0.757、0.842和0.95。
- ATI-ROI置于深橙色区域下缘下方1 cm(P4)时对≥S1、≥S2和S3脂肪变的AUC分别为0.809、0.865和0.949。
- 当ATI-ROI置于P2、P3和P4位置时,肝脂肪变分级是影响ATI值最显著的因素(P<0.001)。
诊断标准与关键数值
- P1位置ATI对≥S1的AUC为0.472(95%CI:0.362-0.581),对≥S2的AUC为0.544(95%CI:0.459-0.628),对S3的AUC为0.655(95%CI:0.571-0.733)。
- P2位置ATI对≥S1的AUC为0.693(95%CI:0.611-0.768),对≥S2的AUC为0.779(95%CI:0.702-0.844),对S3的AUC为0.904(95%CI:0.843-0.947)。
- P3位置ATI对≥S1的AUC为0.757(95%CI:0.611-0.768),对≥S2的AUC为0.842(95%CI:0.772-0.898),对S3的AUC为0.95(95%CI:0.9-0.979)。
- P4位置ATI对≥S1的AUC为0.809(95%CI:0.735-0.870),对≥S2的AUC为0.865(95%CI:0.798-0.916),对S3的AUC为0.949(95%CI:0.9-0.979)。
临床应用与阅片要点
- 行ATI测量评估肝脂肪变时,应避开指示混响伪影区域的深橙色区域,将ATI-ROI置于其下缘下方1 cm处可能是更好的选择。
- 肝脂肪变分级是ATI值最显著的决定因素,判读ATI值时应结合脂肪变分级。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
PURPOSE: To find the optimal position of region of interest (ROI) for evaluating hepatic steatosis using attenuation imaging (ATI) in patients with metabolic dysfunction-associated fatty liver disease (MAFLD).
METHODS: We retrospectively enrolled 143 consecutive patients who underwent percutaneous liver biopsy for the evaluation of MAFLD between October 2020 and October 2022. All ATI measurements were performed by the same radiologist. The ATI-ROI was placed at four different positions using a specialized workstation: the top edge of the sampling box (P1), the lower edge of the dark orange region (P2), 0.5 cm and 1 cm below the lower edge of the dark orange region (P3 and P4). Multivariate linear regression analysis and the area under the curve (AUC) analysis were performed.
RESULTS: The AUCs of ATI at the four different ATI-ROI positions were 0.472 (95% confidence interval [CI]: 0.362-0.581), 0.693(0.611-0.768), 0.757(0.611-0.768), and 0.809 (0.735-0.870) for ≥ S1; 0.544 (0.459-0.628), 0.779 (0.702-0.844), 0.842 (0.772-0.898), and 0.865 (0.798-0.916) for ≥ S2; and 0.655 (0.571-0.733), 0.904 (0.843-0.947), 0.95 (0.9-0.979), and 0.949 (0.9-0.979) for S3, respectively. The factor that most significantly affected ATI was steatosis grade(P<0.001), when ATI-ROI was placed at the position of P2, P3, and P4.
CONCLUSION: Hepatic steatosis grade was the most significant determinant factor for ATI value at multivariate analysis. When clinicians conduct ATI measurement, the dark orange region indicating the area of reverberation artifact should be avoided, and placing the ATI-ROI 1 cm below the lower edge of the dark orange region may be a better choice.
引用
- Bi M, Liu F, Yu J, et al. Preliminary study on determining the optimal position of region of interest for evaluating hepatic steatosis using ultrasound Attenuation imaging. Abdom Radiol (NY). 2025. PMID: 40095021. doi:10.1007/s00261-025-04876-1
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。