文献速递骨肌技术与安全DR

抑制腕关节X线摄影中的固定装置以改善骨折可视化

Suppression of immobilisation device on wrist radiography to improve fracture visualisation.
PubMed 文献 · Eur Radiol · 2024-12-03

本研究回顾性收集1748例患者腕关节X线片,训练CycleGAN模型去除夹板密度,并用预训练YOLO8s评估骨折检测性能;生成的无夹板图像上精确率0.94、召回率0.63、F1 0.75均高于原始夹板图像的0.92、0.5、0.65,接近原始无夹板图像的F1 0.71。

要点

  • CycleGAN可有效抑制腕关节X线片上的夹板密度,保留解剖结构并减少新伪影。
  • 生成的无夹板图像上骨折检测模型的精确率0.94、召回率0.63、F1 0.75,均高于原始夹板图像。
  • 图像改动程度越大,骨折检测改善越明显。

核心结论

  • CycleGAN成功从佩戴夹板的腕关节X线片中去除夹板密度,并改善骨折检测模型的性能。

研究设计与样本

  • 回顾性研究,单机构收集1748例患者腕关节X线片,数据集分为训练集(1696例患者,5353幅图像)和测试集(52例患者,965幅图像);训练CycleGAN生成无夹板图像,使用预训练YOLO8s骨折检测模型评估三组图像。

关键影像表现/征象

  • 生成图像中残留夹板密度<10%者占97.99%。
  • 硬件失真<10%变化者占100%。
  • 解剖失真<10%者占99.63%。
  • 骨折病灶变化<10%者占100%。
  • 新伪影罕见,97.54%的图像无新伪影。

诊断标准与关键数值

  • 骨折检测模型在生成的无夹板图像上精确率0.94、召回率0.63、F1 0.75,均高于原始夹板图像的精确率0.92、召回率0.5、F1 0.65。
  • 骨折检测模型在原始无夹板图像上的F1为0.71。
  • 图像改动程度与骨折检测改善程度呈正相关。

临床应用与阅片要点

  • 生成的无夹板图像可提升腕关节骨折检测性能,可能对临床医生和AI诊断工具有益。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

OBJECTIVES: This study validates the use of CycleGAN-generated wrist radiographs with digitally removed splints, specifically assessing their impact on fracture visualisation.

MATERIALS AND METHODS: We retrospectively collected wrist radiographs from 1748 patients who had imaging before and after splint application at a single institution. The dataset was divided into training (1696 patients, 5353 images) and testing sets (52 patients, 965 images). A CycleGAN-based model was trained to generate splint-free wrist radiographs (generated "splint-less") from the original "splint" images. A pre-trained fracture detection model (YOLO8s) was used to assess fracture detection performance on three image groups: original "splint-less" radiographs, original "splint" radiographs, and generated "splint-less" radiographs. Two radiologists scored the generated images. Subtraction images quantified overall image alterations. Precision, recall, and F1 scores were used to compare fracture detection performance.

RESULTS: CycleGAN effectively generated splint-suppressed radiographs with minimal remaining splint density (< 10% remaining in 97.99%), hardware distortion (< 10% change in 100%), anatomical distortion (< 10% in 99.63%), and fracture lesion changes (< 10% change in 100%). New artefacts were rare (absent in 97.54%). Notably, the fracture detection model achieved higher precision (0.94 vs. 0.92), recall (0.63 vs. 0.5), and F1 score (0.75 vs. 0.65) on the generated "splint-less" radiographs compared to the original "splint" radiographs, approaching the performance on original "splint-less" radiographs (F1 0.71). Furthermore, greater image alterations by CycleGAN correlated with larger improvements in fracture detection.

CONCLUSION: CycleGAN successfully removed splint densities from wrist radiographs with splints.

KEY POINTS: Question Can CycleGAN (Generative Adversarial Networks), designed for image-to-image translation, generate synthetic "splint-less" radiographs to improve fracture visualisation in follow-up radiographs? Findings Removal of splint densities from wrist radiographs using Generative Adversarial Networks preserved anatomical structures and improved the performance of a fracture detection model. Clinical relevance Generated splint-less radiographs can enhance the performance of wrist fracture detection in wrist radiographs, benefiting both human clinicians and AI-powered diagnostic tools.

来源:Eur Radiol,查看原文。版权归原作者所有。

引用

  1. Lee S, Chun KS, Lee S, et al. Suppression of immobilisation device on wrist radiography to improve fracture visualisation. Eur Radiol. 2024. PMID: 39627425. doi:10.1007/s00330-024-11232-2

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。