影像重建参数对使用低剂量胸部CT和开源Sybil算法预测未来肺癌风险的意义
研究基于国家肺癌筛查试验受试者的低剂量CT,评估重建滤波器、层厚及CT厂商对Sybil深度学习算法预测性能的影响。结果显示标准与骨、肺重建滤波器及2mm与5mm层厚间AUC无显著差异,最佳与最差参数组合在第2-4年出现显著差异,Siemens与Toshiba扫描仪间无显著差异。
要点
- Sybil算法预测肺癌风险的性能在不同重建滤波器和轴位层厚间稳健。
- 肺重建滤波器联合2mm层厚较骨重建滤波器联合2.5mm层厚在第2-4年预测性能显著更优。
- Siemens与Toshiba扫描仪间Sybil性能无显著差异。
核心结论
- Sybil对未来肺癌风险的预测性能在不同重建滤波器和轴位层厚间稳健,在多种成像设置中具有通用性;有利重建参数组合可显著提升第2-4年预测能力,不同厂商扫描仪间无显著差异进一步支持其通用性。
研究设计与样本
- 使用国家肺癌筛查试验部分受试者的低剂量CT(此前用于Sybil内部验证的测试集),在匹配千伏峰值、毫安秒、重建间隔、重建直径及重建滤波器或轴位层厚的系列对上进行Sybil算法测试,并比较CT厂商。
诊断标准与关键数值
- 标准与骨重建滤波器1049对,1年AUC 0.84(95%CI 0.70-0.99)vs 0.86(95%CI 0.75-0.98),P=0.87。
- 标准与肺重建滤波器1961对,1年AUC 0.98(95%CI 0.97-0.99)vs 0.98(95%CI 0.96-0.99),P=0.81。
- 2mm与5mm轴位层厚1288对,1年AUC 0.98(95%CI 0.94-1.00)vs 0.99(95%CI 0.97-0.99),P=0.68。
- 肺重建滤波器联合2mm层厚的最佳情景与骨重建滤波器联合2.5mm层厚的最差情景相比,第2-4年性能差异显著(P=0.03)。
- Siemens与Toshiba扫描仪间性能无显著差异。
临床应用与阅片要点
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
PURPOSE: Sybil is a validated publicly available deep learning-based algorithm that can accurately predict lung cancer risk from a single low-dose computed tomography (LDCT) scan. We aimed to study the effect of image reconstruction parameters and CT scanner manufacturer on Sybil's performance.
MATERIALS AND METHODS: Using LDCTs of a subset of the National Lung Screening Trial participants, which we previously used for internal validation of the Sybil algorithm (test set), we ran the Sybil algorithm on LDCT series pairs matched on kilovoltage peak, milliampere-seconds, reconstruction interval, reconstruction diameter, and either reconstruction filter or axial slice thickness. We also evaluated the cumulative effect of these parameters by combining the best- and the worst-performing parameters. A subanalysis compared Sybil's performance by CT manufacturer. We considered any LDCT positive if future lung cancer was subsequently confirmed by biopsy or surgical resection. The areas under the curve (AUCs) for each series pair were compared using DeLong's test.
RESULTS: There was no difference in Sybil's performance between 1049 pairs of standard versus bone reconstruction filter (AUC at 1 year 0.84 [95% confidence interval (CI): 0.70-0.99] vs 0.86 [95% CI: 0.75-0.98], P = 0.87) and 1961 pairs of standard versus lung reconstruction filter (AUC at 1 year 0.98 [95% CI: 0.97-0.99] vs 0.98 [95% CI: 0.96-0.99], P = 0.81). Similarly, there was no difference in 1288 pairs comparing 2-mm versus 5-mm axial slice thickness (AUC at 1 year 0.98 [95% CI: 0.94-1.00] vs 0.99 [95% CI: 0.97-0.99], P = 0.68). The best-case scenario combining a lung reconstruction filter with 2-mm slice thickness compared with the worst-case scenario combining a bone reconstruction filter with 2.5-mm slice thickness uncovered a significantly different performance at years 2-4 ( P = 0.03). Subanalysis showed no significant difference in performance between Siemens and Toshiba scanners.
CONCLUSIONS: Sybil's predictive performance for future lung cancer risk is robust across different reconstruction filters and axial slice thicknesses, demonstrating its versatility in various imaging settings. Combining favorable reconstruction parameters can significantly enhance predictive ability at years 2-4. The absence of significant differences between Siemens and Toshiba scanners further supports Sybil's versatility.
引用
- Simon J, Mikhael P, Graur A, et al. Significance of Image Reconstruction Parameters for Future Lung Cancer Risk Prediction Using Low-Dose Chest Computed Tomography and the Open-Access Sybil Algorithm. Invest Radiol. 2024. PMID: 39437009. doi:10.1097/RLI.0000000000001131
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。