文献速递介入泌尿生殖技术与安全DSA

Neph-ex:一种用于肾造瘘管交换的3D打印介入放射学培训工具

Neph-ex: a 3D printed interventional radiology training tool for nephrostomy exchange.
PubMed 文献 · Br J Radiol · 2024-01-01

本研究开发并评估了一种模拟人肾、输尿管和膀胱的3D打印训练模型,用于透视引导下肾造瘘管交换和输尿管支架置入训练。通过问卷评估显示,学员使用模型后对操作的信心和导丝导管操作技能有所提升。作者认为Neph-ex模型安全有效,可提高透视引导下肾造瘘管交换和顺行输尿管支架置入的熟练度。

要点

  • 3D打印模型模拟肾、输尿管和膀胱,可透视下充盈肾盂肾盏系统并操作导丝、导管和支架。
  • 学员使用模型后对肾造瘘管交换和顺行输尿管支架置入的信心及导丝导管操作技能自我感觉提升。
  • 作者认为该模型安全有效,可用于透视引导下肾造瘘管交换和顺行输尿管支架置入的动手训练。

核心结论

  • Neph-ex模拟模型对于提高透视引导下肾造瘘管交换和顺行输尿管支架置入的熟练度是安全有效的动手训练工具。

研究设计与样本

  • 采用立体光刻(SLA)3D打印技术,使用SLA树脂和Anycubic SLA打印机;以塑料管连接3D打印的肾脏和膀胱作为输尿管;通过学员使用模型前后的问卷评估模型获取肾造瘘管交换和输尿管支架置入技能的有效性。

临床应用与阅片要点

  • 该模型可让学员在透视下练习肾造瘘管交换、肾造瘘造影和顺行支架置入。
  • 作者认为该模型安全有效,可用于改善透视引导下肾造瘘管交换和顺行输尿管支架置入的熟练度。

局限性

  • 据作者所知,尚无市售的透视引导下肾造瘘管交换和输尿管支架部署模拟模型。
  • 此前尚无关于肾造瘘管交换模拟模型的文章发表。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

OBJECTIVES: Fluoroscopic guided procedures are a mainstay for interventional radiology (IR) procedures. Practice is needed for the novice to interpret fluoroscopic images and simultaneously perform the procedure hands-on as well as control the foot pedal to screen. We describe the development of a training simulation model which simulates the human kidney, ureter, and bladder.

METHODS: Stereolithography (SLA) 3D print technology using SLA resin and Anycubic SLA printer were employed. A plastic tubing was used to connect the 3D printed kidney and bladder as the ureter. This simulation model permits fluoroscopic guided filling of "pelvicalyceal system" with contrast as well as ureteric stenting, guidewire, and drainage catheter manipulation. Effectiveness of the model to attain skills for nephrostomy exchange and ureteric stenting was obtained via questionnaire from trainees prior to and after utilizing the model.

RESULTS: The 3D printing simulation model of the kidney, ureter, and bladder system enables trainees to perform nephrostomy exchange, nephrostogram, and antegrade stenting. Participants felt more confident to perform the procedures as they were more familiar with the procedure. Besides that, participants felt their wire and catheter manipulation skills have improved after using the simulation model.

CONCLUSIONS: Neph-ex simulation model is safe and effective for hands-on training in improving proficiency of fluoroscopy-guided nephrostomy exchange and antegrade ureteric stenting.

ADVANCES IN KNOWLEDGE: As of our knowledge, there are no commercially available simulation models for fluoroscopic guided nephrostomy exchange and ureteric stent deployment. No article on nephrostomy exchange simulation model has been published before.

来源:Br J Radiol,查看原文。版权归原作者所有。

引用

  1. Ch'ng LS, Mahfudz AS, Azman H, et al. Neph-ex: a 3D printed interventional radiology training tool for nephrostomy exchange. Br J Radiol. 2024. PMID: 39254598. doi:10.1093/bjr/tqae184

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。