使用深度学习从CT扫描中自动量化肩胛骨与肩盂形态
开发并验证开源深度学习模型,基于CT图像分割肩胛骨并定位13个标志点,测量肩盂版本、倾斜角、临界肩角等参数。5折交叉验证纳入60例正常和56例骨关节炎肩胛骨,分割Dice系数均超0.97,各参数R²为0.88–0.95,但肩盂倾斜角手工与自动测量间差异显著(p<0.001)。
要点
- 自动分割肩胛骨的Dice系数在正常与病理病例中均超过0.97。
- 自动定位肩胛骨与肩盂标志点的平均误差为1–2.5 mm,与人工评估者相当。
- 肩盂倾斜角手工与自动测量间存在显著差异(p<0.001),其余参数一致性可接受。
核心结论
- 该开源深度学习模型能自动量化肩盂骨关节炎患者的肩胛骨与肩盂形态,精度满足临床使用。
研究设计与样本
- 研究论文,开发并验证开源深度学习模型;采用5折交叉验证,纳入60例正常/无骨关节炎肩胛骨和56例病理/骨关节炎肩胛骨;基于CT图像分割肩胛骨并定位13个标志点,其中9个用于建立不受骨关节炎变化影响的坐标系,其余4个位于肩盂腔用于确定肩盂尺寸和方向。
关键影像表现/征象
- 手动与自动肩胛骨分割的Dice相似系数在正常和病理病例中均超过0.97。
- 自动肩胛骨与肩盂标志点定位的平均误差在1至2.5 mm之间,自动方法与人工评估者相当。
诊断标准与关键数值
- 肩盂版本自动测量R²=0.95,肩盂倾斜角R²=0.93,临界肩角R²=0.95,肩盂极角R²=0.90,肩盂高度R²=0.88,肩盂宽度R²=0.94。
- 肩盂倾斜角手工与自动测量间存在显著差异(p<0.001)。
临床应用与阅片要点
- 该模型可自动测量肩盂版本、肩盂倾斜角、临界肩角、肩盂极角、肩盂高度和肩盂宽度,供临床使用。
- 肩盂倾斜角的手工与自动测量存在显著差异(p<0.001),解读该参数时需注意测量方式。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
OBJECTIVES: To develop and validate an open-source deep learning model for automatically quantifying scapular and glenoid morphology using CT images of normal subjects and patients with glenohumeral osteoarthritis.
MATERIALS AND METHODS: First, we used deep learning to segment the scapula from CT images and then to identify the location of 13 landmarks on the scapula, 9 of them to establish a coordinate system unaffected by osteoarthritis-related changes, and the remaining 4 landmarks on the glenoid cavity to determine the glenoid size and orientation in this scapular coordinate system. The glenoid version, glenoid inclination, critical shoulder angle, glenopolar angle, glenoid height, and glenoid width were subsequently measured in this coordinate system. A 5-fold cross-validation was performed to evaluate the performance of this approach on 60 normal/non-osteoarthritic and 56 pathological/osteoarthritic scapulae.
RESULTS: The Dice similarity coefficient between manual and automatic scapular segmentations exceeded 0.97 in both normal and pathological cases. The average error in automatic scapular and glenoid landmark positioning ranged between 1 and 2.5 mm and was comparable between the automatic method and human raters. The automatic method provided acceptable estimates of glenoid version (R2 = 0.95), glenoid inclination (R2 = 0.93), critical shoulder angle (R2 = 0.95), glenopolar angle (R2 = 0.90), glenoid height (R2 = 0.88) and width (R2 = 0.94). However, a significant difference was found for glenoid inclination between manual and automatic measurements (p < 0.001).
CONCLUSIONS: This open-source deep learning model enables the automatic quantification of scapular and glenoid morphology from CT scans of patients with glenohumeral osteoarthritis, with sufficient accuracy for clinical use.
引用
- Satir OB, Eghbali P, Becce F, et al. Automatic quantification of scapular and glenoid morphology from CT scans using deep learning. Eur J Radiol. 2024. PMID: 38944907. doi:10.1016/j.ejrad.2024.111588
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。