双频切换高强度聚焦超声优化浅表消融的评估
本研究设计工作频率为4.5 MHz和13.7 MHz的双频高强度聚焦超声换能器及双频阻抗匹配网络,通过体模和离体实验比较单频超声与双频切换超声所致热损伤面积和温升,结果显示双频切换超声产生更大损伤面积并改善控制灵活性和消融精准性。
要点
- 双频切换超声在体模和离体实验中产生的热损伤面积均大于单频超声。
- 双频切换超声可灵活控制消融面积和温升速率。
- 双频阻抗匹配网络用于优化电声转换效率。
核心结论
- 双频切换超声在浅表组织中产生的消融面积大于单频超声。
- 双频切换超声可灵活控制消融面积和温升速率,优化声功率沉积以实现精准消融。
研究设计与样本
- 研究设计双频高强度聚焦超声换能器,工作频率为4.5 MHz和13.7 MHz。
- 设计双频阻抗匹配网络以优化电声转换效率。
- 开展体模和离体实验,测量并比较单频超声与双频切换超声所致热损伤面积和温升。
关键影像表现/征象
- 体模实验中双频切换超声所致热损伤面积大于单频超声。
- 离体实验中双频切换超声所致热损伤面积大于单频超声。
- 双频切换超声提供改善的控制性和灵活性,实现精准高效消融。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
英文原文(摘要)· 点击展开
OBJECTIVE: Dual-frequency high-intensity focused ultrasound (HIFU) thermal ablation is an exceptionally promising technique for treating tumors due to its precision and effectiveness. However, there are still a few studies on improving the accuracy and efficiency of HIFU in superficial ablation applications. This study proposes a method utilizing dual frequency switching ultrasound (DFSU) to enhance the efficiency and precision of superficial treatments.
METHODS: A dual-frequency HIFU transducer operating at 4.5 MHz and 13.7 MHz was designed, and a dual-frequency impedance matching network was designed to optimize electro-acoustic conversion efficiency. Phantom and ex vivo tests were conducted to measure and compare thermal lesion areas and temperature rises caused by single-frequency ultrasound (SFU) and DFSU.
RESULTS: In both phantom and ex vivo tests, the utilization of DFSU resulted in larger lesion areas compared to SFU. Moreover, DFSU provided improved control and versatility, enabling precise and efficient ablation.
CONCLUSION: DFSU exhibits the ability to generate larger ablation areas in superficial tissue compared to SFU, and DFSU allows flexible control over the ablation area and temperature rise rate. The acoustic power deposition of HIFU can be optimized to achieve precise ablation.
引用
- Huang W, Jiao Y, Li J, et al. Evaluation of Dual-Frequency Switching HIFU for Optimizing Superficial Ablation. Ultrasound Med Biol. 2024. PMID: 38548527. doi:10.1016/j.ultrasmedbio.2024.02.016
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。