文献速递神经外周血管技术与安全MRUSDSA

用于MRI与多普勒超声成像的患者特异性血管流模体

Patient-Specific Vascular Flow Phantom for MRI- and Doppler Ultrasound Imaging.
PubMed 文献 · Ultrasound Med Biol · 2024-03-11

研究开发并验证了一种兼容MRI与多普勒超声的多模态血流模体,采用组织模拟材料和水溶性树脂3D打印制作无壁患者特异性管腔,成功制作斜管、Y形分叉血管及基于脑DSA数据的动静脉畸形模体,并展示其3D超快功率多普勒成像结果及与MRI的兼容性。

要点

  • 水溶性树脂3D打印可制作无壁患者特异性血管管腔,兼容超声与MRI。
  • 模体涵盖斜管、Y形分叉及基于脑DSA数据的动静脉畸形三种拓扑。
  • 3D超快功率多普勒可显示模体内复杂血流模式,模体与MRI兼容。

核心结论

  • 作者成功开发了一种基于可定制水溶性树脂打印的MRI与多普勒超声兼容血流模体,涵盖几何形态至患者特异性血管结构。

研究设计与样本

  • 方法学研究,开发并验证多模态MRI与超声多普勒模体,采用组织模拟材料及水溶性树脂3D打印制作无壁患者特异性管腔;成功制作斜管、Y形分叉血管及基于临床脑DSA数据的动静脉畸形三种模体。

关键影像表现/征象

  • 斜管模体提供标准化拓扑下的参考样数值。
  • Y形模体代表分叉血管结构。
  • 动静脉畸形模体源自临床脑DSA数据。
  • 3D超快功率多普勒成像显示模体可模拟人脑中所观察到的复杂血流模式。

诊断标准与关键数值

  • 模体兼容MRI与多普勒超声成像。
  • 无壁患者特异性管腔由水溶性树脂3D打印制作。
  • 动静脉畸形模体基于临床脑DSA数据构建。

临床应用与阅片要点

  • 该模体可作为神经外科手术室外测试硬件与软件的外部平台。
  • 理想超声血流模体应提供斜管等标准化拓扑的参考样数值,并允许在类似实际患者血管形态的结构中测量。
  • 模体应与其它临床脑血管影像模态兼容。

局限性

  • 原文未报告局限性

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

OBJECTIVE: Intraoperative Doppler ultrasound imaging of human brain vasculature is an emerging neuro-imaging modality that offers vascular brain mapping with unprecedented spatiotemporal resolution. At present, however, access to the human brain using Doppler Ultrasound is only possible in this intraoperative context, posing a significant challenge for validation of imaging techniques. This challenge necessitates the development of realistic flow phantoms outside of the neurosurgical operating room as external platforms for testing hardware and software. An ideal ultrasound flow phantom should provide reference-like values in standardized topologies such as a slanted pipe, and allow for measurements in structures closely resembling vascular morphology of actual patients. Additionally, the phantom should be compatible with other clinical cerebrovascular imaging modalities. To meet these criteria, we developed and validated a versatile, multimodal MRI- and ultrasound Doppler phantom.

METHODS: Our approach incorporates the latest advancements in phantom research using tissue-mimicking material and 3D-printing with water-soluble resin to create wall-less patient-specific lumens, compatible for ultrasound and MRI.

RESULTS: We successfully produced three distinct phantoms: a slanted pipe, a y-shape phantom representing a bifurcating vessel and an arteriovenous malformation (AVM) derived from clinical Digital Subtraction Angiography (DSA)-data of the brain. We present 3D ultrafast power Doppler imaging results from these phantoms, demonstrating their ability to mimic complex flow patterns as observed in the human brain. Furthermore, we showcase the compatibility of our phantom with Magnetic Resonance Imaging (MRI).

CONCLUSION: We developed an MRI- and Doppler Ultrasound-compatible flow-phantom using customizable, water-soluble resin prints ranging from geometrical forms to patient-specific vasculature.

来源:Ultrasound Med Biol,查看原文。版权归原作者所有。

引用

  1. Soloukey S, Generowicz B, Warnert E, et al. Patient-Specific Vascular Flow Phantom for MRI- and Doppler Ultrasound Imaging. Ultrasound Med Biol. 2024. PMID: 38471997. doi:10.1016/j.ultrasmedbio.2024.02.010

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。