文献速递骨肌神经CTMR

多模态影像用于复杂脊柱手术的三维打印与手术预演

Multimodality Imaging for 3D Printing and Surgical Rehearsal in Complex Spine Surgery.
PubMed 文献 · Radiographics · 2024-01-01

本文介绍多模态影像(CT、MRI)用于复杂脊柱肿瘤手术的三维打印与手术预演,涵盖从图像采集到三维模型后处理、材料选择与质量管理体系的完整工作流程,并通过病例讨论展示数字截骨平面预设及与术中导航系统的整合,以提升手术精准性、准确性和安全性。

要点

  • 复杂脊柱手术需多模态影像完整显示软组织与骨受累范围,整合信息辅助手术规划。
  • 基于CT和MRI创建的数字三维模型或三维渲染及三维打印模型,可放置虚拟和实物手术或截骨平面。
  • 三维打印工作流程包括图像采集、后处理、材料选择与质量管理体系,并可与术中导航系统整合。

核心结论

  • 多模态影像结合三维打印技术可显著提高复杂脊柱肿瘤手术的精准性、准确性和安全性,数字三维模型与三维打印模型有助于手术规划与预演,并可预设数字截骨平面及整合术中导航系统。

研究设计与样本

  • 本文为来自PubMed(Radiographics)的综述/实践性文章,作者提供三维打印工作流程(从图像采集到三维模型后处理)、材料选择与质量管理体系信息,并通过基于病例的讨论展示手术预演、数字截骨平面预设及与术中导航系统的整合;原文未报告系统检索范围与纳入文献数量。

关键影像表现/征象

  • 复杂脊柱手术病例需多模态影像以完整显示疾病范围,包括软组织和骨受累。
  • 基于CT和MRI等影像检查创建的数字三维模型或三维渲染以及三维打印模型,可放置虚拟和实物手术或截骨平面,增强手术规划与预演。

临床应用与阅片要点

  • 作者提供三维打印工作流程的实用信息,涵盖从图像采集到三维打印模型后处理、最佳材料选择以及纳入质量管理体系,以帮助外科医生利用三维打印进行手术规划。
  • 作者通过基于病例的讨论强调手术预演过程、如何预设数字截骨平面以及如何与术中手术导航系统整合。

局限性

  • 原文未报告局限性

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

英文原文(摘要)· 点击展开

Surgery is the mainstay treatment of symptomatic spinal tumors. It aids in restoring functionality, managing pain and tumor growth, and improving overall quality of life. Over the past decade, advancements in medical imaging techniques combined with the use of three-dimensional (3D) printing technology have enabled improvements in the surgical management of spine tumors by significantly increasing the precision, accuracy, and safety of the surgical procedures. For complex spine surgical cases, the use of multimodality imaging is necessary to fully visualize the extent of disease, including both soft-tissue and bone involvement. Integrating the information provided by these examinations in a cohesive manner to facilitate surgical planning can be challenging, particularly when multiple surgical specialties work in concert. The digital 3-dimensional (3D) model or 3D rendering and the 3D printed model created from imaging examinations such as CT and MRI not only facilitate surgical planning but also allow the placement of virtual and physical surgical or osteotomy planes, further enhancing surgical planning and rehearsal. The authors provide practical information about the 3D printing workflow, from image acquisition to postprocessing of a 3D printed model, as well as optimal material selection and incorporation of quality management systems, to help surgeons utilize 3D printing for surgical planning. The authors also highlight the process of surgical rehearsal, how to prescribe digital osteotomy planes, and integration with intraoperative surgical navigation systems through a case-based discussion. ©RSNA, 2024 Test Your Knowledge questions for this article are available in the supplemental material.

来源:Radiographics,查看原文。版权归原作者所有。

引用

  1. Tappa K, Bird JE, Arribas EM, et al. Multimodality Imaging for 3D Printing and Surgical Rehearsal in Complex Spine Surgery. Radiographics. 2024. PMID: 38386600. doi:10.1148/rg.230116

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。