文献速递冠心病

充血性回撤压力梯度用于表征冠状动脉粥样硬化模式

Measurement of Hyperemic Pullback Pressure Gradients to Characterize Patterns of Coronary Atherosclerosis.
PubMed 文献 · J Am Coll Cardiol · 2019-01-01

这项前瞻性多中心研究在稳定型心绞痛患者中,以1 mm/s速度行压力导丝回撤,基于FFR回撤曲线将CAD模式判定为局灶型、弥漫型或混合型,并计算PPG指数。共纳入158支血管(117例患者),与造影相比36%的血管病变模式被重新分类;PPG指数可区分局灶与弥漫病变(p<0.001)。

要点

  • 充血性回撤压力梯度可表征CAD的病理生理模式。
  • 基于FFR回撤曲线,36%血管的病变模式较造影被重新分类。
  • PPG指数可量化心外膜阻力分布并区分局灶与弥漫CAD。

核心结论

  • 充血性回撤压力梯度可表征CAD的病理生理模式。
  • 与常规造影相比,FFR回撤曲线评估使三分之一的血管病变模式被重新分类。
  • PPG指数是量化心外膜阻力分布并区分局灶与弥漫CAD的新指标。

研究设计与样本

  • 前瞻性多中心研究,纳入因稳定型心绞痛接受临床指征冠状动脉造影的患者。
  • 压力导丝回撤装置速度设为1 mm/s。
  • 共纳入158支血管(117例患者),生成100条FFR回撤曲线,使用984,813个FFR值。

主要发现

  • 基于冠状动脉生理学,36%的血管病变模式与造影相比被重新分类。
  • 20 mm内最大PPG中位数为0.083(四分位距:0.063至0.118)FFR单位。
  • 功能性病变平均范围为39.3 ± 21.3 mm。
  • PPG指数平均值为0.58 ± 0.18,可区分病理生理性局灶与弥漫病变(p < 0.001)。

关键数值与推荐

  • 基于冠状动脉造影和FFR回撤曲线,CAD模式判定为局灶型、弥漫型或两者混合型。
  • PPG指数基于20 mm内压力下降幅度和功能性病变范围计算,低PPG指数提示弥漫性CAD。

临床怎么用

  • 在稳定型心绞痛患者行冠状动脉造影时,可考虑使用充血性回撤压力梯度评估CAD模式。
  • FFR回撤曲线可补充造影信息,识别被造影低估的弥漫性病变。
  • PPG指数可用于量化心外膜阻力分布,辅助区分局灶与弥漫CAD。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Diffuse atherosclerosis is commonly observed in angiographically normal segments in patients with stable coronary artery disease (CAD). The distribution of epicardial resistance along the vessel can be evaluated using coronary physiology. OBJECTIVES: The purpose of this study was to characterize the pathophysiological patterns of CAD using invasive pressure pullbacks during continuous hyperemia. METHODS: In this prospective, multicenter study of patients undergoing clinically-indicated coronary angiography due to stable angina, a pressure-wire pullback device was set at a speed of 1 mm/s. Based on coronary angiography and on the fractional flow reserve (FFR) pullback curve, the patterns of CAD were adjudicated as focal, diffuse, or a combination of both. The distribution of epicardial resistance was characterized using the hyperemic pullback pressure gradients (PPGs). The PPG index, a continuous metric based on the magnitude of pressure drop over 20 mm and on the extent of functional disease was computed to determine the pattern of CAD. Low PPG index indicates diffuse CAD. RESULTS: A total of 158 vessels (n = 117) were included. Overall, 984,813 FFR values were used to generate 100 FFR pullback curves. Using coronary physiology, 36% of the vessel disease patterns were reclassified compared to angiography. The median of maximal PPG over 20 mm was 0.083 (interquartile range: 0.063 to 0.118) FFR units, and the mean extent of functional disease was 39.3 ± 21.3 mm. The mean PPG index was 0.58 ± 0.18 and differentiated pathophysiological focal and diffuse disease (p < 0.001). CONCLUSIONS: Pathophysiological patterns of CAD can be characterized by motorized hyperemic PPGs. The evaluation of the FFR pullback curve reclassified one-third of the vessels' disease patterns compared with conventional angiography. The PPG index is a novel metric that quantifies the distribution of epicardial resistance and discriminates focal from diffuse CAD. (Physiological Patterns of Coronary Artery Disease; NCT03824600).

来源:J Am Coll Cardiol,查看原文。版权归原作者所有。

引用

  1. Collet C, Sonck J, Vandeloo B, et al. Measurement of Hyperemic Pullback Pressure Gradients to Characterize Patterns of Coronary Atherosclerosis. J Am Coll Cardiol. 2019. PMID: 31582137. doi:10.1016/j.jacc.2019.07.072

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。