文献速递主动脉疾病

三维打印模板辅助医师改良支架移植物用于开窗EVAR的系统综述

A systematic review of three-dimensional printed template-assisted physician-modified stent grafts for fenestrated endovascular aneurysm repair.
PubMed 文献 · J Vasc Surg · 2021-03-04

该系统综述检索PubMed和OVID Medline,评估三维打印模板辅助医师改良支架移植物进行开窗腔内动脉瘤修复的新兴文献。共筛选出9篇相关文章,包括技术报告、病例报告或系列、前瞻性试验和致编辑信。结论认为该技术在有 urgent 或 emergent 需求且定制开窗支架不可及时有前景,但需更大规模研究验证工作流程和制造分发方法。

要点

  • 三维打印模板辅助医师改良支架可能提高开窗对齐准确性。
  • 现有证据仅来自9篇低级别文献,缺乏大规模研究。
  • 该技术或适用于紧急或急症病例中定制开窗支架不可及时。

核心结论

  • 三维打印模板辅助医师改良支架移植物是开窗腔内动脉瘤修复的有前景的新途径,尤其在定制开窗支架不可用的紧急或急症病例中,但需更大规模研究验证。

研究设计与样本

  • 系统综述,遵循PRISMA声明,于2020年4月30日检索PubMed和OVID Medline,使用「3D printing」和「physician modified」或「surgeon modified」及相关检索词。
  • 初检获50篇文章,经筛选后纳入9篇相关文章进行批判性分析。

主要发现

  • 纳入的9篇文章包括1篇技术报告、5篇病例报告或系列、2项前瞻性试验和1封致编辑信。
  • 未发现直接相关的高级别研究。

临床怎么用

  • 在紧急或急症病例中,当定制开窗支架不可及时,可考虑使用三维打印模板辅助医师改良支架移植物。
  • 需进一步验证模板工作流程的关键步骤,并研究最合适的制造和分发方法。

局限性

  • 现有文献证据级别低,缺乏大规模研究。
  • 模板工作流程的关键步骤尚未验证。
  • 制造和分发方法需进一步研究。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

OBJECTIVE: Fenestrated endovascular aneurysm repair has yet to gain widespread adoption owing to the technical complexity and increased risk of complications. Three-dimensional (3D) printed templates to guide fenestrated physician-modified stent grafts (PMSGs) are a novel technique that may have the potential to increase the accuracy of fenestration alignment, and to disrupt both the cost and timing of the current commercial fenestrated endograft supply chain. We have conducted a critical appraisal of the emerging literature to assess this. METHODS: A systematic literature search was performed using PubMed and OVID Medline as guided by the PRISMA statement on April 30, 2020. We used "3D printing" and "physician modified" or "surgeon modified" and all related search terms. We identified 50 articles which met our search criteria. None articles were included as being of direct relevance to 3D-printed template-assisted PMSGs for fenestrated endovascular aneurysm repair. Abstracts were screened individually by each investigator to ensure relevance. RESULTS: Nine relevant articles were identified for critical analysis. These included one technical report, five case reports or series, two prospective trials, and one letter to the editor. CONCLUSIONS: These 3D-printed templates are a promising new avenue to assist with the placement of fenestrations in PMSGs, particularly in urgent or emergent cases where custom fenestrated endografts are unavailable, with larger scale studies warranted. Further work to validate the key stages of the template workflow are required, as well as further investigation into the most suitable manufacturing and distribution methods before the mainstream implementation of this novel technique.

来源:J Vasc Surg,查看原文。版权归原作者所有。

引用

  1. Coles-Black J, Barber T, Bolton D, et al. A systematic review of three-dimensional printed template-assisted physician-modified stent grafts for fenestrated endovascular aneurysm repair. J Vasc Surg. 2021. PMID: 33677030. doi:10.1016/j.jvs.2020.08.158

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。