高斯表面曲率映射提示高风险B型胸主动脉夹层
该研究对一例B型主动脉夹层进展为A型夹层的患者进行CT扫描,利用有限元分析和高斯曲率分析比较夹层前后主动脉几何与应力分布变化。发现高斯曲率分析能捕捉中心线曲率分析无法显示的几何变化,A型夹层前小弯侧应力集中,夹层后应力分布更均匀,提示高斯曲率分析或可识别B型夹层的几何不稳定性。
要点
- 高斯曲率分析可捕捉中心线曲率分析遗漏的主动脉几何变化。
- A型夹层前小弯侧主应力向量发散,夹层后转为均匀环向应力。
- 高斯曲率分析或有助于识别B型夹层的几何不稳定。
核心结论
- 高斯表面曲率分析能捕捉中心线曲率分析无法显示的主动脉几何变化。
- A型夹层前小弯侧存在几何聚焦导致的高能量应力状态,夹层后应力分布更均匀。
- 高斯曲率分析或可提供捕捉B型夹层几何不稳定性的窗口。
研究设计与样本
- 对一例B型主动脉夹层进展为A型夹层的患者,获取夹层前后CT扫描。
- 在Simpleware ScanIP中分割模型并计算中心线曲率。
- 在Abaqus中对模型加压进行有限元分析。
- 将分割模型导出至Matlab,应用改良算法计算高斯曲率。
主要发现
- ScanIP生成的中心线未能捕捉A型夹层前后小弯侧锐度的变化。
- 高斯曲率分析显示A型夹层前曲率分布较夹层后更宽。
- 加压后应力分布分析显示A型夹层前小弯侧主应力向量发散较大,夹层后转为更均匀的环向应力。
临床怎么用
- 高斯曲率分析可作为评估B型主动脉夹层几何不稳定性的补充工具。
- 对于中心线曲率分析未见异常的B型夹层,可考虑结合高斯曲率分析识别高风险几何特征。
局限性
- 本研究基于单例患者的CT扫描,结论的普适性需更大样本验证。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Identifying fragile aortas that are more likely to lead to adverse clinical outcomes would provide surgeons with a better sense of how to balance the risks of surgical versus medical management in patients with type B dissections. We examine the progression of a type B dissection into a type A dissection in a patient and analyze changes in the Gaussian surface curvature distribution, as well as the response of the stress distribution at the lesser curve in response to pressurization. We hypothesize that examining the Gaussian curvature will provide us with a link between aortic surface geometry and the stress distribution, which is crucial to understanding the process driving aortic dissection. METHODS: Computed tomography scans of a patient before and after the type A dissection are obtained. These are segmented in Simpleware ScanIP. Centerline curvatures are calculated on segmented models in ScanIP. Models are then pressurized in the finite element analysis software Abaqus. The Gaussian curvature is calculated by exporting segmentations into the computational program Matlab and applying a modified previously published algorithm. RESULTS: The centerlines generated in ScanIP fail to capture the change in the acuity of the lesser curve before and after the type A dissection. Instead, Gaussian curvature analysis shows that the curvature distribution before the type A dissection is much wider compared with the distribution after the type A dissection. In addition, analyzing the stress distribution in response to pressurization reveals that before the type A dissection there is a large divergence in the principal stress vectors at the lesser curve but this transitions to a more uniform hoop stress after the type A dissection. CONCLUSIONS: Our analysis demonstrates that Gaussian surface curvature analysis captures changes in aortic geometry that are otherwise silent in centerline curvature analysis. Here, we show that as the aorta develops a type A dissection it is able to more smoothly handle the hoop stress at the lesser curve compared with the stress focusing seen in the before type A geometry. We propose that the geometric focusing before type A creates a higher energy stress state, which is relaxed on retrograde dissection. Thus, Gaussian curvature analysis may provide a window to capture underlying geometric instability in type B dissections.
引用
- Dhara SS, Hermsen M, Khabaz K, et al. Gaussian Surface Curvature Mapping Indicating High Risk Type B Thoracic Aortic Dissections. Ann Vasc Surg. 2020. PMID: 32866573. doi:10.1016/j.avsg.2020.08.096
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。