文献速递主动脉疾病

基于影像的位移分析与计算血液动力学在腹主动脉瘤腔内修复术后评估中的应用

Image-Based Displacements Analysis and Computational Blood Dynamics after Endovascular Aneurysm Repair.
PubMed 文献 · Ann Vasc Surg · 2020-07-30

该研究通过两例EVAR术后患者(分别使用PI和PII两种覆膜支架)在1、12、60个月的动态CTA,计算心搏内位移与随访位移,并结合计算流体动力学分析壁面剪切应力。结果发现两种支架的位移模式与血流扰动区域相关,TAWSS测量显示扩大区域的流场扰动与位移分析一致。该方法有望帮助医生预测支架演变并辅助制造商优化设计。

要点

  • 基于影像的位移分析可量化EVAR术后支架在不同时间尺度的细微行为变化。
  • 计算流体动力学显示的TAWSS扰动区域与位移分析发现的变形区域相关。
  • 该方法可能辅助预测支架长期演变并反馈支架设计性能。

核心结论

  • 基于影像的位移分析结合CFD可对EVAR术后支架行为进行非常细微的多时间尺度评估。
  • TAWSS测量显示的流场扰动与位移分析中的支架变形区域相关。
  • 此类研究可能帮助医生预测支架生命周期内的演变,并为制造商提供支架性能与设计信息。

研究设计与样本

  • 两例接受EVAR治疗的患者,分别植入PI(ePTFE覆于镍钛支架框架)和PII(聚酯织物缝合于不锈钢Z型支架骨架)两种覆膜支架。
  • 在植入后1、12和60个月行动态CTA,分割重建后计算心搏内位移和随访位移。
  • 进行血液动力学数值模拟以计算黏性力,特别是壁面剪切应力和时间平均壁面剪切应力(TAWSS)。

主要发现

  • IHD分析显示PI支架表现为轻微平移而无变形,PII支架则表现出更硬的不锈钢支架行为。
  • FUD显示PI支架金属支柱运动主要集中在支架远端主体及与髂支重叠区域。
  • PII支架主体中部和下前区域观察到巨大的FUD。
  • CFD分析显示PI的髂区重塑和PII的主体区域重塑伴随速度模式改变,血流冲击管壁并逐渐导致支架金属丝变形。
  • TAWSS测量显示扩大区域的流场扰动与位移分析相关。

临床怎么用

  • 对于EVAR术后患者,可考虑结合动态CTA影像位移分析与CFD评估支架长期行为。
  • 关注PI支架远端主体及髂支重叠区的位移,以及PII支架主体中部和下前区域的巨大位移。
  • TAWSS扰动区域与位移分析一致,可作为评估支架变形和血流扰动的参考指标。

局限性

  • 仅纳入两例病例,样本量极小,结论的普遍性有限。
  • 随访时间点仅包括1、12和60个月,未涵盖更长期或更密集的时间点。
  • 研究未报告统计学比较或置信区间,无法评估组间差异的显著性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: To examine intraheartbeat displacements (IHD) and geometrical changes of endografts for abdominal aortic aneurysm repair over the course of years, defined as follow-up displacements (FUD), and to correlate them with computational fluid dynamics (CFD). Despite the widespread use of endovascular aneurysm repair (EVAR), we still know little about endograft behavior after deployment. METHODS: Two cases, treated with either expanded polytetrafluoroethylene on a nitinol stent frame (PI) or with woven polyester fabric sutured to a stainless-steel Z stent skeleton (PII), were submitted to dynamic computed tomography angiography at 1, 12, and 60 months after implantation. After segmentation, IHD were computed as displacements of the reconstructed surface with respect to the diastolic instant. Similarly, FUD were studied using imaging techniques that align temporal successive segmentations. In addition, numerical simulations for blood dynamics were performed to compute viscous forces, specifically wall shear stress and time-averaged wall shear stress (TAWSS). RESULTS: IHD analysis showed slight translations without deformation for the PI endograft with respect to the stiffer stainless-steel endograft behavior of PII. FUD showed in PI motion of the metallic struts mainly focused on the distal main body of the endograft and in the zone overlapping with iliac branches. In PII, we observed a huge FUD in the middle and inferior-anterior regions of the main body. CFD analysis revealed changes of velocity patterns associated with remodeling of the iliac zone for PI and of the main body region for PII, where flow impinges the lumen wall and progressively induces deformation of the endograft wires. Measurement of TAWSS demonstrated flow disturbances in the enlarged region correlated with displacement analysis. CONCLUSIONS: Image-based displacement analysis associated with CFD enabled very subtle evaluations of endograft behavior on different temporal scales. This kind of study could be helpful both for physicians, forecasting evolution during the life span of the endograft, and manufacturers, giving them useful information about endograft implant performance and design.

来源:Ann Vasc Surg,查看原文。版权归原作者所有。

引用

  1. Domanin M, Piazzoli G, Trimarchi S, et al. Image-Based Displacements Analysis and Computational Blood Dynamics after Endovascular Aneurysm Repair. Ann Vasc Surg. 2020. PMID: 32738387. doi:10.1016/j.avsg.2020.07.014

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。