三导丝技术:困难解剖下血管内器械输送新方法
本文介绍一种新技术:将三根0.014英寸导丝并联置入0.035英寸管腔导管内,形成足够硬度的平台,以便在困难解剖中输送0.035英寸器械。文中展示主动脉分叉困难、髂内动脉迂曲及肾动脉误覆盖补救三个病例,并与常用0.035英寸导丝比较相对硬度。
要点
- 三根0.014英寸导丝并联可提供足够硬度平台,便于输送0.035英寸器械
- 适用于常规硬导丝无法跟进或出现「弹跳」的迂曲解剖
- 可用于下肢介入、髂分支装置置入及肾动脉补救等多种场景
核心结论
- 「三导丝技术」是让血管内器械通过困难迂曲解剖的有效方法,可用于多种临床场景。
- 当传统硬0.035英寸导丝无法跟进、出现「弹跳」时,该技术尤其有用。
- 每根0.014英寸导丝较软、易通过迂曲血管,三根并用作为轨道时能提供足够硬的输送平台。
研究设计与样本
- 技术描述类文章,报告三个说明性病例:下肢介入中困难的主动脉分叉、置入髂分支装置时迂曲的髂内动脉、近端袖套释放处理1a型内漏时误覆盖肾动脉后的补救。
- 作者还使用若干常用0.035英寸导丝作比较,量化三根0.014英寸导丝配置的相对硬度。
主要发现
- 三根0.014英寸导丝经0.035英寸管腔导管并行置入,可形成支撑0.035英寸器械输送的硬平台。
- 三个病例分别涉及困难主动脉分叉、迂曲髂内动脉和肾动脉误覆盖补救,均应用该技术。
- 作者报告该技术在上述场景中有效,但未给出量化成功率或随访数据。
临床怎么用
- 在常规硬0.035英寸导丝无法通过或跟进时,可尝试三根0.014英寸导丝并行建立轨道。
- 适用于下肢介入、髂分支装置输送及肾动脉误覆盖补救等需要额外支撑的困难解剖。
- 操作时需注意该技术为病例系列描述,效果与安全性尚需更多数据验证。
局限性
- 仅为技术描述与三个说明性病例,样本量小,无对照或结局数据。
- 相对硬度比较仅使用若干常用0.035英寸导丝,未报告具体数值或统计检验。
- 缺乏长期通畅率、并发症发生率等临床结局。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
We describe a novel endovascular technique in which three 0.014″ guidewires are placed in parallel through a 0.035″ lumen catheter, in order to create a stiff platform to allow for delivery of 0.035″ profile devices through challenging anatomy. Three illustrative cases are presented: a difficult aortic bifurcation during lower extremity intervention, a tortuous internal iliac artery during placement of an iliac branch device, and salvage of a renal artery after inadvertent coverage during proximal cuff deployment for type 1a endoleak. We also quantify the relative stiffness of the triple 0.014″ wire configuration, using several well-known 0.035″ wires for comparison. The "triple wire technique" is an effective method for tracking endovascular devices through difficult tortuous anatomy, and can be used in a variety of clinical settings. The technique is especially useful when a traditional, stiff 0.035″ wire will not track without "kicking out." Each 0.014″ wire is reasonably soft and traverses the tortuous vessel easily, but when the 3 wires are used together as a rail it provides a stiff enough platform for delivery.
引用
- Stern JR, Cheng CP, Colvard BD, et al. The Triple Wire Technique for Delivery of Endovascular Components in Difficult Anatomy. Ann Vasc Surg. 2020. PMID: 32335254. doi:10.1016/j.avsg.2020.04.021
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。