文献速递主动脉疾病

短主髂动脉解剖中Gore Excluder腹主动脉瘤与髂分支支架植入技术要点

Technical Tips for the Implantation of the Gore® Excluder® Abdominal Aortic Aneurysm and Iliac Branch Endoprosthesis in Short Aortoiliac Anatomies.
PubMed 文献 · Ann Vasc Surg · 2019-08-02

本文介绍在短主髂动脉解剖中植入Gore Excluder腹主动脉瘤(AAA)主体与髂分支支架(IBE)的技术,以扩大原本不适合腔内修复患者的治疗选择。通过四种策略缩短组件总长度,部署过程中实现超过3 cm的长度缩减。

要点

  • 通过导丝pull-pull技术使IBE适应髂动脉分叉。
  • 采用「交叉分支」构型部署并利用释放时缩短髂桥接组件。
  • 借助C3可重新定位输送系统对AAA主体进行近端缩短。

核心结论

  • 四种技术策略可在部署过程中将组件总长度缩短超过3 cm,使短主髂动脉解剖患者获得腔内修复机会。

研究设计与样本

  • 技术要点描述性文章,未报告样本量。
  • 针对短主髂动脉解剖患者使用Gore Excluder AAA主体与IBE。

主要发现

  • 使用四种策略缩短组件总长度,部署过程中实现超过3 cm的缩减。
  • 策略包括导丝pull-pull技术、交叉分支构型、髂桥接组件释放时缩短及主体近端缩短。

临床怎么用

  • 对短主髂动脉解剖、常规腔内修复受限者,可综合运用上述四种技术缩短组件长度。
  • 利用C3可重新定位输送系统可在近端调整主体位置。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

The purpose of this article is to describe the techniques used to deploy a Gore® Excluder® abdominal aortic aneurysm (AAA) and iliac branch endoprosthesis (IBE) in a short aortoiliac anatomy, expanding treatment options of a patient otherwise unfit for endovascular repair. Four strategies were used to shorten the total length of the components, achieving a reduction of over 3 cm during deployment: a pull-pull technique on a through-and-through guidewire to accommodate the IBE onto the iliac bifurcation, deployment in a "cross-limb" configuration, foreshortening of the iliac bridging component during release, and final proximal shortening of the AAA main body thanks to the C3 repositionable delivery system.

来源:Ann Vasc Surg,查看原文。版权归原作者所有。

引用

  1. Fernandez Prendes C, Mascia D, Melissano G, et al. Technical Tips for the Implantation of the Gore® Excluder® Abdominal Aortic Aneurysm and Iliac Branch Endoprosthesis in Short Aortoiliac Anatomies. Ann Vasc Surg. 2019. PMID: 31382006. doi:10.1016/j.avsg.2019.05.023

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。