文献速递主动脉疾病颈动脉与弓上血管

血管腔内手术中的图像融合与三维路径图技术

Image Fusion and 3-Dimensional Roadmapping in Endovascular Surgery.
PubMed 文献 · Ann Vasc Surg · 2018-05-22

本文综述了图像融合技术的原理与流程:基于术前影像(通常为CT)分割三维模型、规划并标记、术中锥形束CT配准、实时将三维模型与透视图像叠加引导。作者发现该技术在EVAR、复杂EVAR、胸主动脉EVAR、颈动脉支架置入及2型内漏中尤为有用,并已被证明可减少辐射剂量、碘对比剂用量并缩短手术时间。

要点

  • 图像融合将术前CT分割的三维血管模型与术中透视实时配准叠加,用于复杂三维病变的腔内手术引导。
  • 作者发现该技术在EVAR、复杂EVAR、胸主动脉EVAR、颈动脉支架置入及2型内漏中尤为有用。
  • 多种场景下图像融合已被证明可减少辐射剂量、减少碘对比剂用量并缩短手术时间。

核心结论

  • 在当前形式下,图像融合已被证明是复杂血管腔内手术规划和成功实施的重要组成部分。
  • 未来融合模型可能能够考虑由硬导丝和器械引入引起的血管变形,且依赖用户的操作步骤可能变得更加自动化。

研究设计与样本

  • 本文为综述,围绕血管腔内手术中图像融合与三维路径图技术的原理、工作流程、应用场景与未来方向进行阐述。

主要发现

  • 图像融合工作流程为:首先从术前影像(通常为计算机断层扫描)分割三维模型,然后用于手术规划并放置特定标记、存储将用于术中引导的C臂角度。
  • 手术时进行术中锥形束计算机断层扫描,将三维模型配准到患者台上解剖结构,最后系统用于实时引导,将三维模型与叠加的透视图像共同显示。
  • 作者发现图像融合对血管腔内动脉瘤修复(EVAR)、复杂EVAR、胸主动脉EVAR、颈动脉支架置入及2型内漏尤为有用。
  • 图像融合已在多种场景中被证明可减少辐射剂量、减少碘对比剂用量并缩短手术时间。

临床怎么用

  • 作者基于自身经验认为图像融合在EVAR、复杂EVAR、胸主动脉EVAR、颈动脉支架置入及2型内漏中尤为有用。
  • 作者认为图像融合在当前形式下已是复杂血管腔内手术规划和成功实施的重要组成部分。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

Practitioners of endovascular surgery have historically used 2-dimensional (2D) intraoperative fluoroscopic imaging, with intravascular contrast opacification, to treat complex 3-dimensional (3D) pathology. Recently, major technical developments in intraoperative imaging have made image fusion techniques possible, the creation of a 3D patient-specific vascular roadmap based on preoperative imaging which aligns with intraoperative fluoroscopy, with many potential benefits. First, a 3D model is segmented from preoperative imaging, typically a computed tomography scan. The model is then used to plan for the procedure, with placement of specific markers and storing of C-arm angles that will be used for intraoperative guidance. At the time of the procedure, an intraoperative cone beam computed tomography is performed, and the 3D model is registered to the patient's on-table anatomy. Finally, the system is used for live guidance in which the 3D model is codisplayed with overlying fluoroscopic images. There are many applications for image fusion in endovascular surgery. We have found it to be particularly useful for endovascular aneurysm repair (EVAR), complex EVAR, thoracic EVAR, carotid stenting, and for type 2 endoleaks. Image fusion has been shown in various settings to lead to decreased radiation dose, less iodinated contrast use, and shorter procedure times. In the future, fusion models may be able to account for vessel deformation caused by the introduction of stiff wires and devices, and the user-dependent steps may become more automated. In its current form, image fusion has already proven itself to be an essential component in the planning and success of complex endovascular procedures.

来源:Ann Vasc Surg,查看原文。版权归原作者所有。

引用

  1. Jones DW, Stangenberg L, Swerdlow NJ, et al. Image Fusion and 3-Dimensional Roadmapping in Endovascular Surgery. Ann Vasc Surg. 2018. PMID: 29793018. doi:10.1016/j.avsg.2018.03.032

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。